Parsonver PSLD1 Smart Watches User Manual

: June 12, 2024
: Parsonver

Table of Contents

Parsonver PSLD1 Smart Watches
Pair with Watch
Basic Operation
More Information
Setting Mode
Charge
Replace the watchband
Precautions
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Parsonver PSLD1 Smart Watches

Press and hold the side power button to turn on the watch
Note: For first use, please charge it to activate, taking about 2 hours for full charge.

Pair with Watch

Open the app, register and log in to your account.
Click the second small icon “Device” at the bottom of the page – Click “+Add device” – Click the icon to scan the code in the upper right corner – Scan the QR code on the watch (Settings – QR code) – on the watch “Do you agree to pair with the phone?” that pops up, select ” v ” – to achieve a successful connectio
Note:
Turn on the Bluetooth on the mobile phone.
Reset the watch when no Bluetooth signal is found.
Need to enter the app to pair the watch, cannot connect to the Bluetooth in the phone settings.
When the Bluetooth is successfully connected, the main interface pulls down and the sign in the upper left corner is C->, if there is no connection, the sign in the upper left corner is ( )

Basic Operation

Swipe Down to access quick settings.
Do not disturb mode
Brightness adjustment
Setting mode
Find phone
View system information, including Bluetooth name, Mac address, firmware version, UI version
Swipe Up to enter messages interface.
Swipe Right to enter menu interface.
Swipe Left to enter data, heart rate and sleep, etc.
Press and hold the main interface to select the screen dial.
Press and hold the right button for about 3 seconds to shut down.

More Information

Data
To view the number of steps walked, calories burned, distance.
Sports
To select a sport mode and check the exercise time, heart rate, the number of steps walked.
Heart rate
Track your heart rate, slide down to see a 24-hour real-time heart rate graph.
Note: To view the 24-hour real-time heart rate graph, Open the app and find the second small icon “Device” at the bottom of the page – Click “continuous monitoring” – Open “health timing monitoring” – Customize the monitorina time.
Sleep
To monitor the sleep data, can view sleep time, light sleep time, deep sleep time.
Messages
Open the app and find the second small icon “Device” at the bottom of the page – Click message reminder” – Open the message reminder type
Note: The watch can only receive incoming call alerts, but cannot answer the calls or reply text messages.
Weather
Open the app and find the second small icon “Device” at the bottom of the page – Click “Weather reports”
Female
Open the app and find the third small icon “Me” at the bottom of the page – Click “Women’s Health” – Click “Only remember menstruation”/”Preparation of pregnancy”/”Pregnancy Period” – Set the corresponding time -Click”Start Menstrual Mode”and can get women’s health alerts right on your watch
Shake for photograph
Open the app and find the second small icon “Device” at the bottom of the page – Click Shake for the photograph”to enter the photograph function.

Setting Mode

Style switch There are 3 styles for you to choose.
Display Change the watch face, adjust the brightness and the screen time, and also can set the time of “raise to wake”.
Battery Check the current battery and open the power saving mode.
Vibration intensity Choose the vibration intensity (Off-Soft-Strong).
Language Choose the language.
QR code Scan the code to connect the watch or download the APP.
Password Open the password switch to set the lock screen password.
System Check system info shut down, and reset.

Charge

For charging, please place the watch flat, and make sure the 2 metal holes on the back are aligned with the metal tip of the charging head (charging contact spacing: 4mm).
Note:

The rated voltage of the charging head cannot exceed 5V/2A.
Please do not use the vehicle power supply to charge, to avoid causing the charging cable to age or burn out due to the unstable voltage.

Replace the watchband

Slide the switch of the watchband, and replace the same specification (watchband width: 18mm).

Precautions

If you experience any discomfort or rash after wearing, please stop using and contact us to return the product.
Do not wear the watch when swimming. Please wipe the watch with a clean cloth when getting wet.
Using correctly to avoid allergy
Keep your watch clean, especially after workouts, or when the watch is dirty.
Wear the watch correctly, not too tight or too loose. Don’t wear it 24 hours a day, and it is recommended taking off the watch for at least 20 minutes a day.
Strengthen the moisture barrier and use moisturizers containing lipids, glycerol and ceramide.
Use creams such as hydrocortisone to relieve itching.
See a dermatologist to get a conclusive answer.