CDVI i180ER 180Kg Mortice Electromagnetic lock Stainless Steel Installation Guide

: June 12, 2024
: CDVI

Table of Contents

CDVI i180ER 180Kg Mortice Electromagnetic lock Stainless Steel
Product Information
Product Usage Instructions
PRODUCT PRESENTATION
PACKAGE CONTENT
ELECTRICAL CONNECTIONS
Recommended power supplies
MOUNTING RECOMMENDATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CDVI i180ER 180Kg Mortice Electromagnetic lock Stainless Steel

Product Information

Product Name: i180ER
Product Type: Mortice Electromagnetic Lock
Material: Stainless Steel
Lock Type: Monitored
Corrosion Resistance: High
Warranty: 10 years
Installation: Easy
Recommended Use: Exterior
Fail Mode: Fail safe (Door unlocked when power off)
Holding Force: 180 kg
Built-in Varistor: Yes (Built-in electronic protection to eliminate back EMF)
Dimensions (L x W x D): 201 x 32 x 24 mm
Armature Plate Dimensions (L x W x D): 130 x 32 x 9 mm
Power Supply: 12/24V dc
Consumption: 450 mA @ 12V dc, 225 mA @ 24V dc
IP Rating: IP66
Certifications: CE Certification, WEEE & RoHS Compliant

Product Usage Instructions

Mounting Recommendations:
- Securely fix the magnetic lock and armature plate to their supports.
- Ensure that the magnetic lock and the armature plate are aligned.
- Mount the armature plate floating around the central mounting screw to compensate for any misalignment of the door.
Electrical Connections:
- For default setup, use 12V dc power supply.
- Check the jumper position before connecting the lock to the input current. Incorrect positioning can damage the lock.
- The N.O./N.C. signal only switches when the door is closed with the electromagnetic lock powered.
- Refer to the manual for voltage selection jumpers and terminal block connections.
- Correspondence:
- 12 or 24V dc – 0V
- Normally closed (NC) – COM
- Normally open (NO)

PRODUCT PRESENTATION

Monitored
Mortice
High corrosion resistance
Delivered with armature plate
No mechanical wear
Ease of installation
Recommended for exterior use
Fail safe (Door unlocked when power off) Holding force: 180 kg
Built-in varistor: Built-in electronic protection to eliminate back EMF
Dimensions (L x W x D): 201 x 32 x 24 mm
Armature plate dimensions (L x W x D): 130 x 32 x 9 mm
Power supply: 12/24V dc
Consumption: 450 mA @ 12V dc 225 mA @ 24V dc

PACKAGE CONTENT

CDVI i180ER 180Kg Mortice Electromagnetic lock Stainless Steel-
FIG2

ELECTRICAL CONNECTIONS

12V dc default setup

Terminal block| ****

Correspondence

---|---
+| 12 or 24V dc
–| 0V
NC| Normally closed
C| COM
NO| Normally open

The N.O./N.C. signal only switches when the door is closed with the electromagnetic lock powered

IMPORTANT NOTE

Check the jumper position before connecting the lock to the input current. An incorrect positioning could damage the lock. This type of damage is not covered by the warranty.

Voltage selection jumpers

Recommended power supplies

MOUNTING RECOMMENDATIONS

Armature plate

It is vital that the magnetic lock and armature plate are securely fixed to their supports.
The magnetic lock and the armature plate must be aligned.
The armature plate must be mounted “floating” around the central mounting screw to compensate for any misalignment of the door

Important Note: It is important to follow the mounting recommendations and check the jumper position before connecting the lock to avoid any damage. Incorrect positioning can void the warranty.

Recommended Power Supplies: