CDVI S3TR2641T1 Wireless Radio Transmitter Four Buttons Dark Gray Instructions

CDVI S3TR2641T1 Wireless Radio Transmitter Four Buttons Dark Gray

Product Information

• Product Name: IT Trasmettitore CDVI S3TR2641T1/T2/T4
• Product Type: Transmitter
• Manufacturer: CDVI Wireless Spa
• Manufacturer Address: Via Piave, 23 – 31020 San Pietro di Feletto (TV) – Italy
• Guarantee Period: 24 months from the manufacturer date
• Declaration of Conformity: The radio equipment type S3TR2641T1/T2/T4 is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.erone.com.

Technical Specifications:

• Number of keys:
• Supply:
• Battery duration:
• Battery type:
• Current consumption:
• Operating frequency:
• Security Code combinations number:
• Modulation:
• E.r.p.:
• Range in open space:
• Operating temperature:
• Dimensions:
• Weight:

Product Usage Instructions

1. Memorization: The transmitter security code has to be stored onto the receiver or the receiver’s memory available. Your own installer or reseller will perform this operation during the installation or will give you the necessary instructions during the selling. Ask your installer for the best suitable receiver.
2. How to change the battery: To access the batteries, slide out the battery door. Place the 2xCR2016 lithium batteries with the positive polarity upward. Note: Please dispose of the batteries correctly as they are hazardous waste.
3. Troubleshooting:
   • No radio signal – transmitter LED OFF
   • Low range – Transmitter LED blinking
   • No radio signal – transmitter LED ON
   • Low battery – Replace the battery
   • Check receiver
4. Guarantee: The guarantee period of the product is 24 months, beginning from the manufacturer date. During this period, if the product does not work correctly due to a defective component, the product will be repaired or substituted at the discretion of the producer. The guarantee does not cover the plastic container integrity. After-sale service is supplied at the producer’s factory.

Transmitter CDVI S3TR2641T1/T2/T4

Description

• The remote control CDVI series 034A type S3TR2641T1/T2/T4 has been designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system. (KeeLoq ® Hopping code).
• The code sent by the transmitter changes at every activation, avoiding any scanning and copying risk. Each transmitter is manufactured and sold with a different univocal serial number set-in-factory. The real transmitted code is the result of a special algorithm which combines a serial number, a manufacturer key and a synchronization number.

Memorization
The transmitter security code has to be stored onto the receiver or the receivers memory available. Your own installer or reseller will perform this operation during the installation or will give you the necessaries instructions during the selling. Ask your installer the best suitable receiver.

How to change the battery

• To access the batteries slide out the battery door.
• Place the 2xCR2016 lithium batteries with the positive polarity upword.

NOTE: Please dispose of the batteries correctly, they are hazardous waste.

Declaration of Conformity
Hereby, CDVI Wireless Spa, declares that the radio equipment type S3TR2641T1/T2/T4 is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.erone.com.

Technical specifications

• Number of keys: 1 , 2 or 4
• Supply : 6 Vdc
• Battery duration: from 12 to 18 months
• Battery type: 2 x CR2016 Lithium
• Current consumption : 15 mA
• Operating frequency : 433.92 MHz
• 64 Security Code combinations number: 2
• Modulation : AM/ASK
• E.r.p. : 100 150 μW
• Range in open space :100 ÷ 150 m
• Operating temperature : -10 °C ÷ +55 °C
• Dimensions : 72 x 36 x 12 mm
• Weight : 30 g

Troubleshooting

• No radio signal – transmitter led OFF
• Low range – Transmitter led blinking

| Low battery – Replace the battery
---|---
No radio signal – transmitter led ON| Check receiver

Guarantee
The guarantee period of the product is 24 months, beginning from the manufacturer date. During this period, if the product does not work correctly, due to a defective component, the product will be repaired or substituted at the discretion of the producer. The guarantee does not cover the plastic container integrity. After-sale service is supplied at the producer’s factory.

Manufactured by CDVI Wireless Spa
Via Piave, 23 – 31020
San Pietro di Feletto (TV) – Italy

References

• Fabbricanti di soluzioni per le automazioni- CDVI Wireless | Erone

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>