Commercial Electric DC016LEDHUB 16 Inch Smart Hubspace Round Smart Color Selectable LED Flush Mount User Guide

**Commercial Electric DC016LEDHUB 16 Inch Smart Hub space Round Smart

Color Selectable LED Flush Mount**

**

**

THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED ceiling flush mount. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!

Safety Information

• Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
• Consult a qualified electrician if you have any electrical questions or need to replace the driver.
• If you have any non-electrical questions about this fixture, please contact our Customer Service Team at 1-877-527-0313 or homedepot.com or homedepot.ca

WARNING: Disconnect the power prior to removing or installing a light fixture.

Warranty

WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.

WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specially disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.homedepot.com or homedepot.ca

Pre-Installation

PLANNING THE INSTALLATION

Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.

NOTE: Keep your receipt and these instructions for Proof of Purchase.

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS

Installation

Mounting the hardware

1. Thread the mounting screws (BB) into the outlet box so that they extend approximately ½” below the ceiling.

2. Connecting the wires
   NOTE: If you have electrical questions consult your local electrical code for approved grounding methods.

   • Pull the power supply wires out from the outlet box.
   • Connect the black supply wire to the black fixture wire using wire nuts (AA).
   • Connect the white supply wire to the white fixture wire using wire nuts (AA).
   • Connect the fixture ground wire and the supply ground wire together using a wire nut (AA).
   • Wrap all wire connections with electrical tape for a more secure connection.

3. Securing the fixture pan

   • Carefully tuck all the wires and wire connections into the outlet box.
   • Place the fixture pan (B) over the outlet box and feed the mounting screws (BB) through the keyhole slots.
   • Rotate the fixture pan (B) so that the mounting screws (BB) slide into the narrow slots of the keyhole slots.
   • Tighten the mounting screws (BB) so that the fixture pan (B) is secured flush against the ceiling.

4. Assembling the fixture

   • Secure the acrylic shade (A) and the frame (C) to the fixture pan (B) using the thumb nuts (CC).

Hubspace Smart Pairing and Control

Downloading the Hubspace App

1. Download the Hubspace Mobile App from the app store.
2. Launch the app.
3. To register, enter your email address and a password. Or, login if you already have an account.
4. Bluetooth access is required for device setup.

Verify your network

1. This Hubspace device requires a 2.4GHz Wi-Fi channel.
2. Most routers provide a 2.4 GHz Wi-Fi channel.
3. Connect your product to power.

Add a device

1. In the Hubspace app, tap the plus sign “+” in the upper right corner.

2. Scan your product’s QR code. You can find a copy of the QR code on the device itself and in the Quick Start Guide.
   NOTE: Please wait until after fixture flashes one cycle before clicking ‘Connect’. Scan Problem?

3. If the QR code cannot be scanned for some reason, you can enter the code manually. Tap Enter code and follow the instructions.

4. Connect your device to power and follow the instructions on screen.

Set up your voice assistant

1. In the Hubspace app, tap the Hubspace button.
2. Select the Integrations tab, choose your voice assistant and follow the instructions.

These products are also compatible with Alexa and Google Assistant after initial product setup. The initial product setup must be completed using the Hubspace app. After setup, you can opt to control this device using the Alexa or Google Home apps or voice assistance-enabled devices.

Google and Google Play are trademarks of Google LLC. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affliates.
Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc.

For more information on the Hubspace app, setup instructions, or product compatibility details, please visit www.homedepot.com/hubspace. Questions, problems, missing parts?
Before returning to the store, please call Hubspace Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday and 9 a.m. – 6 p.m., EST, Saturday at 877-592-5233 or visit HOMEDEPOT.COM.

Care and Cleaning

EXTERIOR MAINTENANCE

• Use a dry or slightly dampened clean cloth and wipe the surface of the fixture.

INTERIOR MAINTENANCE

• Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
• Use a dry or slightly dampened clean cloth to wipe the interior surface of the fixture.

NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

Dimming

• Dimmable via Hubspace app, dimming range from 10% – 100%
• Use with single pole switch.
• Not compatible with dimmer wall switch.

FCC Notice

NOTICE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference can be determined by turning the equipment off and on, the user is encouraged to try to correct the interface by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes of modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC responsible party: Cordelia Lighting
Address: 20101 S Santa Fe Avenue East Rancho Dominguez, CA 90221
Phone: 800-345-0542

Troubleshooting

Test or replace the switch.

Check the wiring.

Replace the driver.

The fuse blows or circuit breaker trips when light is turned on.| Check the wire connections

Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday
9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM or HOMEDEPOT.CA
Retain this manual for future use.

References

• Home Improvement, Home Renovation, Tools, & Hardware - Homedepot.ca
• Hubspace - Smart Home - The Home Depot

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>