MEEC TOOLS 014137 Oscillating Polishing Machine Instruction Manual

014137 Oscillating Polishing Machine
Instruction Manual

Item no. 014137
18 V
Ø125 mm

014137 Oscillating Polishing Machine

Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)

Care for the environment!
Recycle discarded products in accordance with local regulations.
Jula reserves the right to make changes.
For the latest version of operating instructions, see www.jula.com

EU DECLARATION OF CONFORMITY
Item number
011712 Jula AB, Box 363, SE-532 24 SKARA, SWEDEN

This declaration of conformity is issued under the sole responsibility of the manufacturer.
OSCILLATING POLISHING MACHINE
Conforms to the following directives, regulations, and standards:

This product was CE marked in a year:
Skara 2022-09-01

Mattias Lif
BUSINESS AREA MANAGER (Signatory for Jula and authorized to compile the technical documentation.

SAFETY INSTRUCTIONS

WARNING!
Read all warnings, safety instructions, and other instructions. Failure to follow all the instructions and safety instructions can result in the risk of electric shock, fire, and/or serious personal injury.
Save these instructions and safety instructions for future reference.

WORK AREA

• Keep the work area clean and well-lit.
  Dark and cluttered work areas increase the risk of accidents and injuries.

• Do not use power tools in explosive environments, such as in the vicinity of flammable liquids, gas or dust.
  Power tools produce sparks that can ignite dust and fumes.

• Keep children and onlookers at a safe distance when using power tools.
  You can lose control of the tool if you are distracted.

ELECTRICAL SAFETY

• The plug on the power tool must match the powerpoint. Never modify the plug in any way. Never use an adapter with earthed power tools. Unmodified plugs and matching outlets reduce the risk of electric shock.

• Avoid body contact with earthed surfaces such as pipes, radiators, cookers, and refrigerators. There is an increased risk of electric shock if your body is earthed.

• Do not expose power tools to rain or moisture. There is a greater risk of electric shock if water gets into a power tool.

• Be careful with the power cord. Never use the power cord to carry or pull the tool, or to pull out the plug from the powerpoint.
  Keep the power cord away from heat, oil, sharp edges, and moving parts. Damaged or tangled power cords increase the risk of electric shock.

• If using the tool outdoors, only use an extension cord approved for outdoor use. Cords intended for outdoor use reduce the risk of electric shock.

• If it is absolutely necessary to use power tools in damp conditions, use a mains connection protected by a residual current device (RDC). Using an RCD reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert. Pay attention to what you are doing, and use your common sense when working with power tools. Never use power tools if you are tired or under the influence of drugs, alcohol or medication.
  A moment of inattention when using a power tool can result in serious personal injury.

• Use personal safety equipment.
  Depending on the type of tool and how it is used, safety equipment such as dust masks, non-slip safety shoes, safety helmets, and ear protection reduce the risk of personal injury.

• Avoid accidental starting. Make sure the power switch is in the OFF position before inserting the battery or lifting/carrying the tool. Carrying a power tool with your finger on the switch, or connecting a tool to the mains when the switch is in the ON position, increases the risk of accidents and injuries.

• Remove adjuster keys/spanners before switching on the power tool. Spanners or the like that are left in a rotating part of the tool can cause personal injury.

• Do not overreach. Always maintain a firm footing and good balance. This ensures better control over the power tool in unexpected situations.

• Wear suitable clothing. Do not wear loose-fitting clothing or jewelry.
  Keep your hair, clothing, and gloves away from moving parts. Loose-fitting clothing, jewelry and long hair can get caught in moving parts.

• If dust extraction and dust collection equipment are available, this should be connected and used correctly. The use of such equipment can reduce the risk of dust-related problems.

• Do not allow the fact that you are used to working with similar tools cause you to become over-confident and disregard the safety instructions for the tool.
  A moment of inattention or carelessness can result in serious personal injury.

USING AND LOOKING AFTER POWER TOOLS

• Do not force the power tool. Use the correct power tool for the planned work.
  The tool does the job better and is safer when used at the rate for which it was designed.

• Do not use the tool if it cannot be switched on and off with the power switch. Power tools that cannot be controlled with the power switch are dangerous and must be repaired.

• Pull out the plug and/or remove the battery before making any adjustments, changing accessories, or putting the power tool away. These safety precautions reduce the risk of accidentally starting the power tool.

• Store power tools out of the reach of children when not in use. Never allow children or anyone who is unfamiliar with the power tool and these instructions, to use the tool. Power tools are dangerous if used by inexperienced persons.

• Keep the power tool properly maintained.
  Check that moving parts are properly adjusted and do not jam and that no parts are incorrectly fitted or damaged.
  Check for other factors that could affect functionality. If the power tool is damaged, it must be repaired before being used again. Many accidents are caused by poorly maintained power tools.
  • Keep cutting tools sharp and clean.
  Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
  • Use the power tool, accessories, bits, etc., in accordance with these instructions, taking into account the actual working conditions and the work that is to be done. It can be dangerous to use power tools for purposes other than those for which they are intended to be used.
  • Keep handles and grips clean, dry, and free from oil and grease. Greasy handles and grips make it difficult to hold the tool.

SERVICE

• The power tool must only be serviced by qualified personnel using identical spare parts. This will ensure that the power tool remains safe to use.
• Never attempt to repair damaged batteries. Batteries must only be serviced by an authorized service center or other qualified personnel. (For battery operation only).

USING AND MAINTAINING BATTERY-POWERED TOOLS

• Charge the batteries only with the charger recommended by the manufacturer. The use of another charger can result in the risk of personal injury and fire.

• Only use batteries intended for the power tool. The use of other batteries can result in the risk of personal injury and fire.

• Do not allow batteries to come into contact with paper clips, coins, keys, nails, screws, and other small metal objects that can result in short-circuiting. Short-circuiting the battery terminals can result in the risk of burn injuries or fire.

• Incorrect use can cause liquid to leak from the battery. Avoid touching this.
  Rinse with water after unintentional contact. Seek medical attention if you get battery fluid in your eyes. Leaking battery fluid can cause skin irritation or burn injuries.

• Do not use damaged or modified batteries or products. Damaged or modified batteries can behave unexpectedly, which can result in fire, explosion, and/or personal injury.

• Do not expose the battery or product to naked flames or heat. Batteries can explode at temperatures over 130°C.

• Follow the instructions for the battery and charger. Only charge the battery within the specified temperature range. Incorrect charging can damage the battery and cause a fire.

IMPORTANT INFORMATION ON BATTERY

• Do not dismantle the battery or attempt to replace the battery cells.
• Short-circuiting the battery terminals on this battery with jewelry or tools can result in serious burn injuries.
• Store the battery in a dry place at no more than 27°C.
• Store the battery with a 30% – 50% charge.
• Charge the battery every seven months during long-term storage.

SAFETY INSTRUCTIONS FOR CHARGER

• The battery charger is only intended for use indoors in dry, well-ventilated areas.
• Never attempt to charge nonrechargeable batteries.
• Never attempt to charge batteries not intended to be used with this charger.
• If the battery charger’s power cord is damaged it must be replaced by the manufacturer or an authorized service center to prevent the risk of electric shock.
• The battery charger is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it unless they have received instructions concerning the use of the appliance by someone who is responsible for their safety.
• Keep small children under supervision to make sure they do not play with the battery charger.
• Unplug the plug from the power point before inserting or removing the battery.
• Never leave the battery charger unattended when switched on – the risk of fire and electric shock.
• Protect the battery charger from moisture.
• Never immerse the battery charger in water or any other liquid, or use it where there is a risk of it being exposed to water, or falling into the water.
• WARNING: Explosive gas. Avoid sparks and naked flames. Make sure there is adequate ventilation when using the battery charger.
• Connect the battery charger to an easily accessible power point nearby.
• The battery charger is only intended for household use, not for commercial use.

SAFETY INSTRUCTIONS FOR BELT SANDERS AND UNIVERSAL SANDERS

• Hold the product with the insulated grips when working in areas where it may come into contact with concealed electrical cables or its own power cord. Contact with a live cable will cause the metal parts on the product to also become life – the risk of electric shock.

REDUCTION OF NOISE AND VIBRATIONS

• Plan the work so that exposure to heavy vibrations is spread over a longer period.
• To reduce noise and vibrations when in use, limit the time the tool is in use, and use low-power/vibration mode and suitable safety equipment.
• Take the following precautions to minimise the risks of exposure to vibrations and/or noise:
  – Only use the tool in accordance with these instructions.
  – Check that the tool is in good condition.
  – Use accessories in good condition, and which are suitable for the purpose.
  – Keep a firm grip on the handles/ grips.
  – Maintain and lubricate the tool in accordance with these instructions.

DUST

• Dust produced during the work can be harmful to health, carcinogenic, flammable, or explosive. Use a dust filter mask and suitable equipment for dust extraction/collection.
• The dust from some alloys can catch fire, or explode. Mixtures of materials increase risk – keep the work area clean.

WARNING!
Fire risk. Dust in dust bags, vacuum cleaners, or filters can self-ignite or be ignited by sparks, hot workpieces, or other sources of heat, especially if it comes into contact with polyurethane, solvent-based paint, and other chemicals. Make sure that the tool and/or workpiece do not overheat. Always empty the dust container before pausing the work.
SYMBOLS

| Read the instructions.
---|---
| For outdoor use only.
| Approved in accordance with the relevant directives.
| Recycle discarded products in accordance with local regulations.

TECHNICAL DATA

Polishing machine

Battery charger

Always wear ear protection.
The declared values for vibration and noise, which have been measured according to a standardized test method, can be used to compare different tools with each other and for a preliminary assessment of exposure. The measurement values have been determined in accordance with EN 62841-1, and EN 62841-2-4.
WARNING!
The actual vibration and noise level when using tools may differ from the specified maximum value, depending on how the tool is used and the material. It is, therefore, necessary to determine which safety precautions are required to protect the user based on an estimate of exposure in actual operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the start- up time).
DESCRIPTION
Battery-powered polishing machine with oscillating movement pattern and a highly variable speed (2100–5000 rpm). The powerful motor is brushless and comes with overload protection. Thanks to the comfortable grip surfaces, you can work both ergonomically and safely.

1. Power switch
2. Display
3. Button to increase speed
4. Button to reduce speed
5. Battery lock
6. Charging status light
7. Battery

FIG. 1
MEET MULTI-SERIES
The product is a part of the Meet Multi-series – a series of power tools and garden equipment that uses the same battery and charger.

ACCESSORIES
Materials and accessories for cleaning and polishing, including personal safety equipment, are sold separately in Jula’s department stores and at www.jula.com.

BATTERY

Charging the battery
The battery must be charged before it can be used with a tool. After charging for the first time, use the tool until the battery is completely flat. Repeat this charging and discharging cycle 4 to 5 times.

• If the LEDs on the charger do not go on when charging:
  – check that the charger’s mains adapter is properly plugged into the power point and that the charger is switched on
  – check that the battery is correctly inserted in the charger
  1. Place the battery charger on a level and stable surface. Plug the charger into a 230 V power point.
  2. Connect the battery to the charger so that it clicks in place. The red LED on the charger goes on when the correct contact is made.
  FIG. 2
  3. When the battery is fully charged, after about one hour, the red LED goes off and only the green LED stays on.
  4. Pull out the plug from the power point and release the battery from the charger.
  FIG. 3

Connect/remove the battery
Connect the battery to the battery socket on the tool so that it clicks in place.
FIG. 4
To remove the battery, press the lock (1) and release it as shown in figure (2).
FIG. 5
NOTE:

• Make sure that the power switch on the tool is not pressed in when inserting or replacing the battery.
• Connect the battery with moderate pressure – do not force. An incorrectly connected battery can damage the battery terminals or the battery socket on the tool.
• To check the battery charge level, press the “Press” button to see 1-4 red LEDs, where 1 indicates the low battery level.

STARTING AND STOPPING
Set the power switch (1) in the position I to start. The display shows 00. Set the power switch (1) in position O to switch off.

ADJUSTING THE SPEED

Increasing the speed
Push the button to increase the speed (5) when the product is running. The set speed is shown on the display and changes in the order of 20, 25, 30, 35, 40, 45, and 48 each time the button is pressed. This corresponds to the speeds 2000, 2500, 3000, 3500, 4000, 4500, and 4800 rpm.
Reducing the speed
Push the button to reduce the speed (3) when the product is running. The set speed is shown on the display and changes in the order of 20, 25, 30, 35, 40, 45, and 48 each time the button is pressed. This corresponds to the speeds 2000, 2500, 3000, 3500, 4000, 4500, and 4800 rpm.
Speed settings
A = Mode, B = Indication on display, C = Actual speed (0 = No rotation, 7 = max speed)

POLISHING AND WAXING

NOTE:

• Make sure the surface to be polished is clean and dry.
• Do not polish in direct sunlight.
• Do not polish in low temperatures or high humidity, this can produce a mottled result.
• Do not polish outdoors if it is windy; sand and other particles in the air can adhere to the paintwork and have an abrasive effect when polishing.
• Mask edges if necessary to plastic and rubber parts that you do not want to come in contact with the polish.
• Always switch off the machine before lifting it up from the surface being polished.
• Do not press the machine, allow the inherent weight of the machine to do the job.
• Note that sharp edges are worked more quickly and that the paintwork on these surfaces can be thinner.
• Clean the bonnets at regular intervals and/or replace them during the polishing. Expect to need 2-4 bonnets per car.
  1. Apply five drops of polish the size of peas on the bonnet. Do not use too much polish, it does not do any good and will fasten in the bonnet and produce an inferior result.
  2. Place the bonnet on the surface to be polished and start the machine at low speed.
  3. Spread the polish over a small area (about 30 x 30 cm).
  4. Increase the speed and move the polisher slowly (about 4 cm/sec) backward and forwards over the surface a few times.
  – Apply a few drops of polish on the bonnet when it begins to be used up. Note that a new or newly washed bonnet sucks up more in the beginning. Remember to ALWAYS switch off the machine before lifting it up from the surface.
  5. Use a microfibre cloth to wipe off the polish and produce a bright surface. Check the results and continue on a new small area (about 30 x 30 cm).
  6. When the whole car has been polished the paintwork should be protected with wax. Apply a thin layer by hand, or with a clean and soft polishing wheel. Wait a few minutes and then wipe with a clean microfibre cloth. One tip is to remove residual polish with isopropanol or another deep-cleaning agent adapted for paintwork before applying the wax.
  7. Clean the bonnets and microfibre cloths and store the equipment in a dry, dustless place.

ERROR MESSAGES

8. Power consumption is too high (over 50 A ± 4 A > 500 ms).
9. The product is defective.| 1. Switch off the product.
2. Start the product again.
3. Contact the retailer if the product still does not work properly.
E3| The product does not start
1. Some other reason prevents the product from starting.
2. The product is defective.| 1. Switch off the product.
2. Start the product again.
3. Contact the retailer if the product still does not work properly.
E4| Overload protection
1. Overload.  is defective. 2. The product| 1. Switch off the product.
2. Start the product again.
3. Contact the retailer if the product still does not work properly.
E5| Overheating protection
If the product is used continuously for a long time it can overheat, whereby the overheating protection trips and switches off the product.| Switch off the product and allow it to cool for at least 30 minutes before starting it again.
E6| Undervoltage protection
The voltage is too low (less than 14 ± 0.5 V).| Charge the battery, or replace it with a fully charged battery.
E7| Hardware fault| 1. Switch off the product.
2. Start the product again.
3. Contact the retailer if the product still does not work properly.
E8| Motor failure| 1. Switch off the product.
2. Start the product again.
3. Contact the retailer if the product still does not work properly.
E9| Surge protection
1. The voltage is more than 30 V.| 1. Check that the battery voltage is < 21 V.
2. Use the specified type of batteries.

References

• Jula – products for home and garden
• Jula - Teraz nic Cię nie powstrzyma!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>