PYLE PLMRMBT5B 2 Channel BT Enabled Marine Grade Amplifier User Manual
- June 6, 2024
- Pyle
Table of Contents
PLMRMBTSB / PLMRMBTSS
600 Watt 2 Channel BT Enabled Marine Grade Amplifier
PLMRMBT7B / PLMRMBT7S
1200 Watt 4 Channel BT Enabled Marine Grade Amplifier
User Manual
It’s compact, the waterproof design allows for flexible mounting possibilities, and makes it simple to expand the audio system capabilities for vehicles.
PLMRMBTSB / PLMRMBTSS
Features:
| • 2-Channel Marine Audio Amplifier | • Wired AUX Audio Input |
|---|---|
| • Perfect for Custom Installations & Applications | • Speaker Wiring |
Connectivity
• BT Wireless Music Streaming Ability| • Adjustable Volume Control
• Waterproof Rated & Weather-Resistant Connectors| • Anti-Thump Turn-On
• Marine Grade Rugged Construction| • Soft Turn On / Off
• Integrated Power Wiring Harness| • Overload & Power Protection Circuitry
• Ability to Connect & Stream Audio from External Devices| • Used for
Watercraft & Portable Mobile Vehicle Sound Systems
• Includes Marine Grade BT Flush Mounted Controller
Accessories:
- iPhone/Android Phone /Waterproof 3.5mm Stereo to 3.5mm Adaptor
- 3.5mm Auto Connection Cable
- 0.2m Speaker Connection Wires
- Sold as: Unit
Technical Specs:
| • Power Output: 600 Watt MAX | • Channel Separation : > 65 dB |
|---|---|
| • 2 x 150 Watts RMS@ 4 Ohm | • Frequency Response: 10-40kHz |
| • 2 x 300 Watts MAX @ | • Fuse: 1 0A |
| 4 Ohm | • Power: DC 12V |
| • 2 x 300 Watts RMS@ 2 Ohm | • Amp Dimensions (L x W x H): 5.3″ x 3.5″ x 2.1 |
“-inches
• Marine Grade IP-65 Rating| • Sold as: Kit
• T.H.D: 0.1 %| • Weight: 1.94 lbs.
• S/N Ratio:> 95 dB
PLMRMBT7B / PLMRMBT7S
Features:
• 4-Channel Marine Audio Amplifier| • Includes Marine Grade BT Flush Mounted
Controller
---|---
• Perfect for Custom Installations & Applications| • Wired RCA/AUX Audio Input
• BT Wireless Music Streaming Ability| • Speaker Wiring Connectivity
• Waterproof Rated & Weather-Resistant Connectors| • Adjustable Volume Control
• Marine Grade Rugged Construction| • Anti-Thump Turn-On
• Integrated Power Wiring Harness| • Soft Turn On/ Off
• Ability to Connect & Stream Audio from External Devices| • Overload & Power
Protection Circuitry
• Used for Watercraft & Portable Mobile Vehicle Sound Systems
Technical Specs:
| • Power Output: 1200 Watt MAX | • Channel Separation : > 65 dB |
|---|---|
| • 4 x 150 Watts RMS @ 4 Ohm | • Frequency Response: 10-40kHz |
| • 4 x 300 Watts MAX@4 Ohm | • Fuse: 1 0A |
| • 4 x 300 Watts RMS@ 2 Ohm | • Power: DC 12V |
| • Marine Grade IP-65 Rating | • Amp Dimensions (L x W x H):6.2″3.5″2.1 “-inches |
| • T.H.D: 0.1 % | • Sold as: Kit |
| • S/N Ratio:> 95 dB | • Weight: 2.91 lbs. |
What is included?
When first unpacking your new marine amplifier, Please check first that the package contains all of the items below. If something is missing, contact the store where you purchased the product.
PLMRMBTSB / PLMRMBTSS
- One Piece 2 Channel Marine Power Amplifier
- One Piece iPhone / Android Phone Waterproof 3.5mm Stereo to 3.5 mm Adaptor
- One Piece Marine Grade BT Flush Mounted Controller
- One Piece 3.5 mm Auto Connection cable
- Four Pieces Speaker Connection Wires
PLMRMBT7B / PLMRMBT7S
- One Piece 4 Channel Marine Power Amplifier
- One Piece iPhone / Android Phone Waterproof 3.5mm Stereo to 3.5 mm Adaptor
- One Piece Marine Grade BT Flush Mounted Controller
- One Piece 3.5 mm Auto Connection cable
- Eight Pieces Speaker Connection Wires
Installation Precautions
Before you drill or cut any holes, investigate your vessel’s layout very
carefully. Take special care when you work near the gas tank, fuel lines,
hydraulic lines, and electrical wiring.
Never operate the amplifier when it is unmounted. Attach all audio system
components securely to prevent damage, especially in an accident.
Do not mount this amplifier when wire connections are unprotected in a pinched
condition, in contact with any metal surfaces in your marine vessel, or likely
to be damaged by nearby objects.
Before making or breaking power connections in your system, disconnect the
marine vessel battery. Confirm that your head unit or other equipment is
turned off while connecting the input jacks and speaker terminals. If you need
to replace the power fuse, replace it only with a fuse identical to that
supplied with the amplifier, Using a fuse of a different type or rating may
result in damage to your audio system or your amplifier which is not covered
by the manufacturer’s warranty
Don’t misuse the level control!
Do not mistake the input level control for volume control! It is designed ONLY
to match the output level of your audio source to the input level of your
amplifier. Do not adjust this input level to maximum unless your input level
requires it. Ignoring these instructions will result in an input overload to
the amplifier and excessive audio distortion. It can also cause the
protection circuit to engage.
POWER AND SPEAKER WIRING
PLMRMBTSB
PLMRMBTSS
| Wire Color | Description |
|---|---|
| Red | Battery(+), 12dc |
| Black | Battery(-), Ground |
| White | CH1 (+) |
| White/Black | CH 1 (-) |
| Gray | CH2 (+) |
| Gray/Black | CH2 (-) |
| Wire Color | Description |
|---|---|
| • Red | • Battery(+), 12dc |
| • Black | • Battery(-), Ground |
| • White | • CH1 (+) |
| • White/Black | • CH1 (-) |
| • Gray | • CH2 (+) |
| • Gray/Black | • CH2 (-) |
| • Green | • CH3 (+) |
| • Green/Black | • CH3 (-) |
| • Purple | • CH4 (+) |
| • Purple/Black | • CH4 (-) |
BT Pairing and Connection:
Power:
- Press and hold the power button to power on/off.
Wireless BT Streaming Connection:
- Ensure BT ability is activated, then search for the BT from your BT-enabled device. The light will turn blue and blink while waiting for the BT connection.
- The BT Network Name will appear as “PyleUSA” (No password is required for connecting).
- When the BT is connected, the light will turn blue and stop blinking.
AUX-IN:
- Double click the power button to switch BT mode to Aux-in mode.
Wireless BT Streaming Connection:
- When the device is out of the BT range, BT will be disconnected automatically, the light turns blue while blinking.
- BT will automatically reconnect when detected in range again in 1 O minutes.
- Disconnected BT after 1 O minutes, you need to process BT connection steps (above) to reconnect BT again.
- If the other device occupied the BT during this period (10mins), you need to process BT connection steps (above).
Playing Music:
- Press and hold 3 seconds for Power ON or OFF
- Short press to play music or pause
- Double click the power button to switch BT mode to Aux-in mode
- Short press for next track
- Short press for previous track
- Press and hold VOL+ for volume up
- Press and hold VOL- for volume down
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>