CWI Lighting 9951P16 3 Light Chandelier with Satin Nickel Finish Instruction Manual
- June 9, 2024
- CWI LIGHTING
Table of Contents
CWI Lighting 9951P16 3 Light Chandelier with Satin Nickel Finish
Introduction
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire
cutters, wire strippers, electrical tape, safety glasses.
Light Source: (3) E12 Candelabra Base Bulbs 60W Maximum(Not Include).
Estimated Assembly Time: 20-30 minutes
Preparation: Identify and inspect all parts before beginning
installation. Check package content list and diagrams below to be sure all
parts are present. If any parts are missing or damaged, do not attempt to
assemble, install, or operate the fixture. Contact customer service for re
placement arts
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation.
Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read
them completely before installing the fixture. We strongly recommend that a
licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs
are given sufficient time to cool before removal.
Package Contents
A Fixture Body x1
B Glass shade x3
C Socket sleeve x3
D Ceiling Canopy x1
Hardware Contents
PART
| DESCRIPTION| QUANTITY
---|---|---
BB
| Wire nut|
2pcs
EE| Screw|
2pcs
Installation Instructions
TEP 1 – Install Fixture Body .
STEP 2- Install the Canopy Chain Loop and Nipple
STEP 3 – Install the Fixture Chain and Ceiling Canopy
STEP 4 – Wire Connections
A. Use standard wire connectors (not included) to make all wire connections. Twist connectors until wires are tightly joined together. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box.
TEP 5 – Install Bulbs and Glass shade.
