hubble HCSSGROW Grow Baby Scale with Bluetooth User Guide
- June 6, 2024
- hubble
Table of Contents
hubble HCSSGROW Grow Baby Scale with Bluetooth User Guide
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User’s Guide (available for download from support.hubbleconnected.com).
Setting up your Smart Bluetooth Baby Scale
Install battery
The battery operates with 4 AAA alkaline batteries type LR03 (1.5V).
- Turn the weighing scale bottom up to locate the battery compartment, open the battery door to install the batteries provided as the fi gure shown.
- Install four (4) new “AAA” batteries (LR03) into the battery compartment according to the polarity markings inside.
- Replace the battery cover after insert the batteries.
- Press the Power ON/OFF button to turn on the weighing scale.
Note:
- Batteries are to be installed with the correct polarity.
- Do not mix batteries of different types or mix old and new batteries, replace all 4 batteries when empty with new batteries.
- If the scale is to be stored unused for a long period of time, the batteries should be removed.
- The battery contacts are not to be short-circuited.
Set up HubbleClub by Hubble Connect App to track your baby’s growth
- Scan the QR code with your smart device and download HubbleClub by Hubble Connected App from the App Store for iOS devices or from the Google Play™ Store for Android™ devices.
- Install HubbleClub by Hubble Connected App on your device.
- Open the HubbleClub by Hubble Connected App on your compatible smartphone or tablet.
- Turn on Bluetooth of your compatible smartphone or tablet.
- Follow the in-app instructions to create your Hubble account and connect to your device.
Note:
Please take note of the following minimum system requirements:
Smartphones/Tablets: iOS 10.0, Android™ 7.0, Bluetooth 4.2.
Overview of the control panel
-
LCD Display
Bluetooth Signal
Memory symbol
Flashes when the memory is full.
Weight Change indicator
The symbol appears together with the Memory symbol to show weight value change with Up arrow (weight gain) or Down arrow (weight loss) indications. -
UNIT button
Select the unit of measurement: kilograms (kg) or pounds (lb) -
TARE button
Reset the scale to zero reading. -
HOLD button
If the baby is moving, press the Hold button to lock in the correct weight. Once you pressed, the data will be stored.
Press HOLD while the baby is on the platform alone and still, so the machine stabilises the detected weight (it will flash on the screen). When the display stops flashing, the weight of the baby will be displayed alternating with the up/down difference from the last weight.
Using the baby scale
-
Turn On/Off the baby scale
Press the Power ON/OFF button to turn On/Off the weighing scale. -
Select Weighing Unit
Press the UNIT button on the control panel to select unit of measurement, kilograms (kg) or pounds (lb). -
Tare Weight
The function is to reset the scale’s display to zero. When you measure your baby together with the soft pad, you don’t want to include the soft pad weight in the reading. -
To tare the soft pad, place it on scale, wait for a stable reading.
-
Press the TARE button to reset the display to zero, the digit “ ” is displayed.
-
Baby Weighing
-
Press Power ON/OFF 0 button to turn on the baby scale, when the digits “ ” are displayed, the machine is ready for weighing.
-
Place your baby on the weighing scale until the weight reading steadily appears on the display.
-
Press the HOLD button to lock and store the data. The data is transmitted to HubblClub app when smart device and scale are in sync.
-
Weight Tracker
The scale tracks the weight change between current and last measurements.
The display shows the current weight and the weight difference (between the current weight and the last weight) alternately. Each weight displays for 2s. Scale will turn off automatically after 8s. (Note: In the fi rst use after installing the batteries, the display will only show the current weight, then turn off automatically after 8s.)
-
The symbol indicates it is weight lose against last reading.
Fig.1 -
The symbol indicates it is weight gain against last reading.
Fig.2
-
No weight change was detected (Fig.3).
Fig.3
Note
In the fi rst use after installing the batteries, the display will only show
the current weight. The weight data will not be kept whenever the batteries
are replaced.
General Information
If your product is not working properly, read this Quick Start Guide or the User’s Guide of one of the models listed on page 1.
Contact Customer Service:
Live Chat: hubbleconnected.com
Email: support@hubbleconnected.com
Limited Warranty
Consumer Products and Accessories Limited Warranty (“Warranty”)
Thank you for purchasing this Hubble Smart Nursery branded product
manufactured under license by Binatone Electronics International LTD
(“BINATONE”).
What Does this Limited Warranty Cover?
Subject to the items listed below in the section “What is not Covered”
BINATONE warrants that this Hubble connected branded product (“Product”) will
be free from defects in material and workmanship under normal use for a period
of 1 year from the date of purchase and that any certifi ed accessory
(“Accessory”) sold for use with this product will be free from defects in
materials and workmanship under normal use for a period of 90-days from the
date of purchase. This Limited Warranty is your exclusive warranty and is not
transferable.
What is not covered
This Limited Warranty excludes and does not cover:
- Normal deterioration or wear resulting from use;
- Damage caused by or resulting from misuse, abuse, or accident;
- Damage caused by or resulting from improper operation or storage;
- Damage caused by or resulting from contact with foreign substances, including, but not limited, to liquid, water, rain, humidity, perspiration, sand, dirt, and/or food;
- Damage caused by or resulting from the use of Non-Hubble Smart Nursery branded or certifi ed Products or Accessories or other peripheral equipment;
- Damage caused by or resulting from modifi cations, alterations, tampering, improper installation, or repairs by someone other than Hubble connected, BINATONE or their authorized representatives;
- Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories; and,
- Periodic maintenance, repair and replacement of parts due to normal wear and tear.
What Other Limitations Are There?
THIS LIMITED WARRANTY SETS FORTH THE ENTIRE LIABILITY OF BINATONE AND CONTAINS YOUR SOLE AND EXCLUSIVE REMEDY. OTHER THAN THIS LIMITED WARRANTY, BINATONE MAKES NO ADDITIONAL REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF YOUR STATE DOES NOT PERMIT THE DISCLAIMER OF WARRANTIES, THEN THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. REPAIR OR REPLACEMENT IS YOUR SOLE AND EXCLUSIVE REMEDY AGAINST BINATONE AND Hubble Smart Nursery. IN NO EVENT SHALL BINATONE OR Hubble Smart Nursery’s LIABILITY TO REPAIR OR REPLACE YOUR PRODUCT OR ACCESSORY EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT AND ACCESSORY AND BINATONE AND Hubble Smart Nursery’s TOTAL LIABILITY FOR DAMAGES ARISING FROM THIS LIMITED WARRANTY SHALL NOT EXCEED THE PRICE YOU PAID FOR THE PRODUCT AND ACCESSORY REGARDLESS OF WHETHER SUCH CLAIM ARISES UNDER CONTRACT, STATUTE, TORT OR OTHERWISE. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL BINATONE OR Hubble Smart Nursery BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES. ALL DISCLAIMERS, LIMITATIONS OF LIABILITY AND MODIFICAITONS OF WARRANTIES STILL APPLY EVEN IF THE LIMITED REMEDY OF REPAIR AND REPLACEMENT FAILS OF ITS ESSENTIAL PURPOSE.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specifi c legal rights, and you may have other rights that vary from one jurisdiction to another.
Who is covered?
This Warranty extends only to the fi rst consumer purchaser and is not
transferable.
What will BINATONE do?
BINATONE or its authorized distributor at its sole discretion will, at no
charge, repair or replace any Products or Accessories that do not conform to
this Warranty. In the event that replacement is necessary to remedy a defect
in material or workmanship, BINATONE may use new or remanufactured products,
accessories or parts of equal quality to the original Product or Accessory.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
Live Chat: hubbleconnected.com
Email: support@hubbleconnected.com
You will receive instructions on how to ship the Products or Accessories at
your expense and risk, to a BINATONE Authorized Repair Center.
You must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, (e) your name, address, email address and telephone number.
These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent, employee or staff of BINATONE, that may have been made in connection with your purchase of any Product and/or Accessory.
FCC and IC regulations (FCC Part 15)
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules.
Industry Canada. This device complies with Industry Canada license-exempt RSS
standard(s):
Operation is subject to the following Two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Download User Guide from website: support.hubbleconnected.com
Manufactured, distributed or sold by Binatone Electronics International LTD.,
offi cial licensee for this product. Hubble connected and the Logo, are
trademarks or registered trademarks of Hubble connected Trademark Holdings,
LLC. and are used under license. All other trademarks are the property of
their respective owners.
© 2021 Hubble Connected Mobility LLC. All rights reserved.
Printed in China
US_EN
FCC Statement
Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide Reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one ormore of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by Krell Precision (Yang Zhou)Co.,Ltd. may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF exposure statement:
The transmitter must not be colocated or operated in conjunction with any
other antenna or transmitter. This equipment complies with the FCC RF
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated witout restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>