Orange Electronic SP501 Tire Pressure Sensor User Manual
- June 16, 2024
- Orange Electronic
Table of Contents
Orange Electronic SP501 Tire Pressure Sensor User Manual
TS2547 Tire Pressure Sensor
SP501 Tire Pressure Sensor
FCC and IC Notice
This Class B digital apparatus complies with Part 15 of the FCC Rules,
and with RSS-210 and ICES-003 standards of Industry Canada.
Operation is subject to the following two conditions:
- Th is device may not cause harmful interference, and
- Th is device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications in construction of this device which are
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Caution: If the wheel assembly \TPMS Sensor used on one vehicle is transferred
to another vehicle, the TPMS system on the second vehicle may become
inoperative. This can create an unsafe condition in which the second vehicle
is not protected by the TPMS system.
Caution: DO NOT re-use grommet, valve stem nut or cap. Alay’s use a new sensor
kit.
Note: After lire rotation, replacement, or pressure adjustment, or after wheel
balancing or alignment, TPM system will need to be reset.
Note: If a tire sensor is replaced, always refer to the user service manual
for the re-learn procedure.
Caution: If there is a need to program the sensor after installation, please
make the tire pressure is O PSI.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>