L7124xxxxxx PROLED IP20 Flex Strip 300 Mono Light Instruction Manual
- June 12, 2024
- PROLED
Table of Contents
L7124xxxxxx PROLED IP20 Flex Strip 300 Mono Light
Product Information Product Name: PROLED CUCKOO 90 & 120
Model Number: L7124xxxxxx
Manufacturer: MBN GmbH
Address: Balthasar-Schaller-Str. 3, 86316 Friedberg, Germany
Website: www.proled.com
Energieeffizienzklassen der Lichtquellen:
| Artikelnummer | Energieeffizienzklasse der Lichtquelle |
|---|---|
| L71241512061 | G |
| L71241512062 | G |
| L71241512063 | G |
| L71241512081 | F |
| L71241512082 | F |
| L71241512083 | F |
| L71241512261 | G |
| L71241512262 | G |
| L71241512263 | G |
HINWEIS: Dieses Produkt gilt als ,,umgebendes Produkt im Sinne
der Verordnung (EU) 2019/2020 und (EU) 2019/2015.
Product Usage Instructions
- Switch off the fuse in the fuse box.
- Pull out the luminaire out of the housing and prepare the needed cutout.
- Put the fixing springs to the top and insert the luminaire into the cutout.
- Switch on the fuse in the fuse box.
- Ensure fire regulations are not breached when fitting your lights.
- If you are in any doubt regarding these instructions, consult a qualified electrician.
Exchange of the Lens at Cuckoo 90
- Disassemble the lens by unscrewing the reflector and gently removing the lens with a screwdriver from the LED holder.
- Insert the new lens into the LED holder, making sure to align with the fixing holes, and screw on the reflector.
PROLED CUCKOO
90 & 120 – L7124xxxxxx
Characteristics:
- SMD Chip in Super Warm White, Warm White or Neutral White
- Power consumption 13 W (CUCKOO 90) and 25 W (CUCKOO 120)
- Metal housing round in White
- Beam angle CUCKOO 90 with 15°, 24° and 32° as wells as COCKOO 120 with 20° and 38°
- Power supply 220-240 VAC, 50/60 Hz, not dimmable.
- Dimmable only with special constant current power supply (optional). CUCKOO 90: 300 m, 38 VDC CUCKOO 120: 600 mA, 36 VDC
- Operating temperature range -10° C till +45° C
- CE compliant with applicable European directives
Warning:
- For indoor use only
- Please ensure that the packaging is disposed of in a safe environment
- If cable is defected, do not use the luminaire
- We do recommend that a qualified electrician should be used to install the products
- Do not look at the lighted luminaire directly
Safety indices:
- Be sure to have a qualified electrician complete installation. The customer is not entitled to claim for any lights installed without observing European safety directives. The manufacturer is then discharged
- from liability when damage is caused by improper use or installation. If any luminaire is subsequently modified, the person responsible for the modification shall be considered as manufacturer. Do not cover lamps with heat-insulating materials. For indoor use only. Protection class IP20.
Installation:
Please follow the sequence of installation step by step. Non-observance can
lead to damage of LED.
- Switch off the electricity at the mains before commencing installation or lamp change and (if a fuse box is installed) remove the appropriate circuit fuse to avoid accidental switching on of the mains supply.
- Connect the luminaire to 230 VAC mains.
- Pull out the luminaire out of the housing.
- Put the fixing springs to top and insert the luminaire into cutout.
- Switch on the fuse in the fuse box.
- Ensure fire regulations are not breached when fitting your lights
- If you are in any doubt regarding these instructions, consult a qualified electrician
Installation steps
- Switch off fuse in fuse box.
- Pull out the luminaire out oft he housing. Prepare the needed cutout.
- Put the fixing springs to the top and insert luminaire into the cutout.
- Switch on fuse in fuse box.
Exchange of the lens at Cuckoo 90:
- Structure of the luminaire.
- Disassemble of the lens Unscrew the reflector and gently remove lens with screw driver out of the LED holder.
- Insert new lens
Insert new lens in the LED holder (watch out for the fixing holes ) and screw on the reflector.
Exchange of the lens at Cuckoo 120:
- Structure of the luminaire.
- Disassemble of the lens Unscrew the reflector and gently remove lens with screw driver out of the lens holder.
- Insert new lens
Insert new lens in the lens holder and screw on the reflector.
Energy efficiency class of the light source:
Products listed in this manual contain a light source of following efficiency
class, listed according to the item codes:
Item code Efficiency class of light source
- L71241512061 G
- L71241512062 G
- L71241512063 G
- L71241512081 F
- L71241512082 F
- L71241512083 F
- L71241512261 G
- L71241512262 G
- L71241512263 G
- L71242512061 G
- L71242512062 G
- L71242512063 G
- L71242512081 F
- L71242512082 F
- L71242512083 F
- L71242512261 G
- L71242512262 G
- L71242512263 G
ATTENTION:
This product counts as „containing product“ according to directive (EU)
2019/2020 and (EU) 2019/2015.
The light source is part of the containing product. A separation of the light
source and the containing product using commonly available tools is possible
with this product.
Replacement of the light source using commonly available tools is possible
with this product.
The light source can be separated for testing purposes.
Installation and commissioning may only be performed by qualifies persons.
National installation regulations must be observed.
Luminaires must be disconnected from mains before any work.
05.23 Technical amendments reserved
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg – Germany
www.proled.com