COMELIT 20004606 2in-2out Blind Module Instruction Manual

: June 12, 2024
: Comelit

Table of Contents

COMELIT 20004606 2in-2out Blind Module
DIN rail mounted
Connection
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Product Information

Product Name: Home Automation Module
Model Number: ART. 20004606
Power Supply Voltage: Between 8.5 and 16 mA
Inputs:
- Input 1 (I1)
- Input 2 (I2)
Outputs:
- Output 1 (O1)
- Output 2 (O2)
Total Maximum Load: 2A – 230 Vac
Compatible with electromechanical and electronic motors for automated openings
Dimensions: 50 x 50 x 18.5 mm (1 DIN module)
Weight: 40 g
Operating Temperature: Not specified
Storage Temperature: Not specified
Relative Air Humidity: 5 to 95% with no condensation
Approvals: CE

Product Usage Instructions

Download the SimpleProg software from the website pro.comelitgroup.com.
Connect the Home Automation Module to the home automation BUS.
Set the address of the module on the BUS using the SimpleProg software.
Connect the control buttons to the inputs (I1 and I2) of the module.
Connect the automated openings (e.g., motors for sunblinds or roller shutters) to the outputs (O1 and O2) of the module.
Ensure that the power supply voltage is between 8.5 and 16 mA.
Make sure the total load does not exceed 2A at 230 Vac.
Do not connect the module outputs to direct current motors.
Position the module on a DIN rail in a dedicated control panel or in a junction box.
Connect the +24 Vdc power supply and power supply negative to the module.
Follow the programming instructions provided with the SimpleProg software to program the module.
Specifications and features are subject to change without notice. Refer to the user manual for the most up-to-date information.

TECHNICAL MANUAL

MYCOMELIT: THE APP FOR PROFESSIONALS.
Modulo tapparelle 2in/2out – Art. 20004606
2in/2out blind module – Art. 20004606
Module volet roulant 2 entrées / 2 sorties – Art. 20004606
Rolluikmodule 2in/2out – Art. 20004606
Rollladen-Modul 2in/2out – Art. 20004606
Módulo persiana 2in/2out – Art. 20004606

Warning

This Comelit product was designed for use in the creation of security and home automation systems in residential, commercial or industrial settings and in public buildings or buildings used by the public.
All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the indications provided in the manuals/instruction sheets supplied with those products.
Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
We advise against running the system wires through the same duct as the power cables (230V or higher).
Cut off the power supply before carrying out any maintenance procedures.
To ensure Comelit products are used safely: carefully observe the indications provided in the manuals/instruction sheets and make sure the system created using Comelit products has not been tampered with / damaged.
Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided in the manuals/instruction sheets. Any repair work must be carried out: for the products themselves, exclusively by Comelit Group S.p.A., for systems, by qualified technical personnel.
Comelit Group S.p.A. does not assume any responsibility for: any usage other than the intended use; or non-observance of the indications and warnings contained in this manual/instruction sheet. Comelit Group S.p.A. nonetheless reserves the right to change the information provided in this manual/instruction sheet at any time and without prior notice.

ART. 20004606

Specifications are subject to change without notice.
Home automation module with 2 inputs for direct connection of 2 control buttons and 2 outputs interlocked electronically from the module with electromechanical relays of 2A max. 350W.
Suitable for control of automated openings such as motors for sunblinds or roller shutters with power consumption up to 350W.

The module outputs cannot be connected to direct current motors.

TECHNICAL CHARACTERISTICS

COMELIT-20004606-2in-2out-Blind-Module-FIG-8

with access allowed only for support or servicing by qualified personnel.

ADDRESSING AND PROGRAMMING

The address of the module on the home automation BUS must be set using the SimpleProg software available to download free of charge from pro.comelitgroup.com.
Programming must be carried out by connecting the device to the BUS and sending the programming over this.
Specifications are subject to change without notice.