VIDEX VLE-ERC-72W LED Dimmable Ceiling Luminaire Instruction Manual

June 12, 2024
VIDEX

VIDEX logo VLE-ERC-72W LED Dimmable Ceiling Luminaire
Instruction Manual LED DIMMABLE CEILING LUMINAIRE WITH REMOTE CONTROL.

VLE-ERC-72W LED Dimmable Ceiling Luminaire

VIDEX VLE-ERC-72W LED Dimmable Ceiling Luminaire - fig
1

LED DIMMABLE CEILING LUMINAIRE WITH REMOTE CONTROL

ENVIRONMENTAL PROTECTION.

  1. Rated voltage, frequency.

  2. Rated power.

  3. Rated luminous fl ux.
    3.1. Luminous fl ux of the luminaires.
    3.2. Luminous fl ux of the light sources.
    3.3. This product contains a light source of energy efficiency class.

  4. Color temperature.

  5. Dimmable by the remote controller.

  6. Color Rendering Index.

  7. Beam angle of luminaries.

  8. Nominal lifetime.

  9. Protection against solid foreign objects bigger than 12mm provided.

  10. ON/OFF cycles.

  11. No perceptible flicker to the human eye.

  12. Power factor.

  13. Mercury-free.

  14. Compliance with standards of ecodesign and energy labeling of European Union.

  15. Working temperature range.

  16. Product meets requirements of EU directives.

  17. The minimum distance from the illuminated object.

  18. Class I. A product in which protection against electric shock is provided not only by means of basic insulation but also through additional safety measures, i.e. extra protective circuit to which protective conductor of the fixed feeding installation needs to be connected.

  19. Replace the defective lamp cover immediately. Don’t use the product if the outer bulb is cracked or broken.

  20. Product can be installed and operated in/on a surface made of materials which are normally fl ammable.

  21. The LED light source can be replaceable the manufacturer’s authorized person.

  22. The control gear can be replaceable the manufacturer’s authorized person.

  23. For indoor use only.

  24. Pursuant to the provisions of the WEEE Act, it is forbidden to put waste equipment marked with the symbol of a crossed bin together with other waste. The user, wishing to get rid of electronic and electrical equipment, is obliged to return it to a waste equipment collection point. There are no hazardous components in the equipment that have a particularly negative impact on the environment and human health.

PRODUCT’S PURPOSE AND APPLICATION

This product is intended for household use and other similar general applications.

INSTALLATION INSTRUCTIONS

The manufacturer reserves the right to make technical changes. Read these instructions before installation. Installation must be performed by a qualifi ed person. All work must be carried out with the power supply OFF. Be vigilant throughout the process. The product has a built-in terminal block.
The luminaire must be mounted on the ceiling. Follow these steps to install the luminaire:

  1. Make four holes in the surface so that they match the holes on the bracket and secure the bracket with screws (Fig. 2);

  2. Connect the luminaire to the 230 VAC, 50 / 60Hz mains with a terminal block according to the diagram (Fig. 4.1), (Fig. 4.2).
    ATTENTION. The infrared receiver must be outside (Fig. 3.1), (Fig. 3.2).

  3. Attach the lamp to the bracket with the four side screws (Fig. 5.1), (Fig. 5.2).

Make sure that the mechanical connection and mains connection are correct before fi rst use.
REMOTE CONTROLLER GUIDE (Fig. 1)
Buttons and functions of the remote control:

  1. Turn on / off the lamp;
  2. Night mode at minimum brightness;
  3. Increase brightness;
  4. Reduce brightness;
  5. Change the brightness by 100% / 50% / 25% in a circle;
  6. Reduce the color temperature of light;
  7. Increase the color temperature of light;
  8. Set the auto off timer for 30 minutes;
  9. Set the auto off timer for 60 minutes;
  10. Warm white light mode (3000 K)
  11. Neutral white light mode (4000 K)
  12. Cold white light mode (6000 K)

FUNCTIONAL CHARACTERISTICS

This product should be used indoor only.

MAINTENANCE & SAFETY INSTRUCTIONS

Any maintenance work must be performed when the power supply is cut OFF and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. LED fi xture may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with the damaged electric wiring or places of connections. ATTENTION! Do not look directly at LED light beam. It’s forbidden to use the product with damaged cover. Product must not be used in unfavorable conditions, e.g. water, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
Failure to follow these instructions may result in e.g. fi re, burns, electrical shock, physical injury and other material and non-material damage. Allegro Opt Sp. z o.o. shall not be responsible for any damage resulting from the failure to follow these instructions. The manufacturer has the right to make changes to this instruction.VIDEX VLE-ERC-72W LED Dimmable Ceiling
Luminaire - fig 2

VIDEX logo Allegro Opt Sp. z o.o.
Handlowa 23, 05-120
Legionowo, Poland.

Documents / Resources

| VIDEX VLE-ERC-72W LED Dimmable Ceiling Luminaire [pdf] Instruction Manual
VLE-ERC-72W LED Dimmable Ceiling Luminaire, VLE-ERC-72W, LED Dimmable Ceiling Luminaire, Dimmable Ceiling Luminaire, Ceiling Luminaire, Luminaire
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VIDEX User Manuals

Related Manuals