Jason l 1400×700 Quadro A Wood Leg Counter Table Installation Guide
- August 31, 2024
- Jason L
Table of Contents
1400×700 Quadro A Wood Leg Counter Table
“`html
Product Information
Specifications
-
Product Name: Quadro A WoodLeg Counter Table
-
Sizes Available: 1400×700, 1600×700
-
Tools Required: Power screwdriver, Allen key set
(provided) -
Number of Persons Required for Installation: 2
Product Usage Instructions
Step 01
Insert the Leg wood add on (C) into the Leg Quadro A (Half leg)
(B). Using Allen Key provided, attach mushroom head screw (O) for
all legs.
Step 02
Use corner pads (N) to cover the holes where the head screw
sockets are inserted. Insert a Pin into the top hole of each Leg
wood add on (C). Now insert the Leg bottom beam (D) into the Leg
wood add on (C), using Pins (I) provided. Attach on each leg.
Step 03
Adjust extendable beam (E) to desired length using markers and
secure beam at that length using screws provided.
Step 04
Adjust extendable beams (F) to desired length. Remove plastic
inserts, loosen 2 bolts on beam using allen key, extend lower beam
to the same distance as upper beam, and insert plastic inserts back
into the beam.
Step 05
Attach Upper Beam (E) to legs using nut insert.
FAQ
Q: Do I need any additional tools for assembly?
A: No, the required tools are provided with the product
including a power screwdriver and an Allen key set.
Q: Can I assemble the product alone?
A: No, it is recommended to have 2 persons for the installation
process as stated in the manual.
“`
ASSEMBLY INSTRUCTIONS
Quadro A WoodLeg Counter Table
Sizes: 1400×700 1600×700
Tools Required: Power screwdriver; Allen key set (provided) 2 persons required
for installation
Need help! Call us on 1300 527 665
www.jasonl.com.au
1 of 11
ASSEMBLY INSTRUCTIONS
Quadro A Wood Leg Counter Table
COMPONENTS A Table top x1 B Leg Quadro A (Half leg) x2 C Leg wood add on x4 D
Leg bottom beam
E Upper beam x1 *
F Lower beam x1 G Plastic bracket x4 H Feet x4
SCREWS I M8x20MM CSK x8 J M8x20MM socket head x2 K M6x20MM socket head x4 L
M6x30MM socket head x4 M Pins x4 N Corner pads x4 O Mushroom head M6x30 x4
P Allen key x2
- Colour of the beam is always
black, regardless desk frame colour.
Need help! Call us on 1300 527 665
A
B C D
F G
I
H
E
J KL
M
O
N
www.jasonl.com.au
2 of 11
ASSEMBLY INSTRUCTIONS
Quadro A Wood Leg Counter Table
STEP 01
Plastic bracket holes facing to the other side.
B
C
O
B
You will notice two colored stickers located on each leg.
Both legs must have the colour sticker facing away from where the plastic brackets are inserted.
Need help! Call us on 1300 527 665
Insert the Leg wood add on (C) into the Leg Quadro A (Half leg) (B). Using Allen Key provided, attach mushroom head screw (O) for all legs.
www.jasonl.com.au
3 of 11
ASSEMBLY INSTRUCTIONS
Quadro A Wood Leg Counter Table
STEP 02
N
C
B
Now use corner pads (N) to cover the holes where just inserted the head screw sockets.
You will notice two holes in each Leg wood add on (C). Insert a Pin into the top hole of each leg, as shown in the illustration.
Need help! Call us on 1300 527 665
I
D
Now insert the Leg bottom beam (D) into the Leg wood add on (C), using Pins
(I) provided. Attach on each leg.
www.jasonl.com.au
4 of 11
ASSEMBLY INSTRUCTIONS
Quadro A Wood Leg Counter Table
STEP 01
K
G
B C
D
STEP 02
TOP VIEW
J
H
Using Allen Key provided, attach 2 plastic brackets per leg (G) (as per
picture above) using M6x20MM (K) Socket head screw. Screw the feets (H) to the
bottom of each Leg wood add on (C).
Need help! Call us on 1300 527 665
Using Allen Key provided, attach M8x20MM Socket head (J)screw socket half way into leg for both legs
www.jasonl.com.au
5 of 11
ASSEMBLY INSTRUCTIONS
Quadro A Wood Leg Counter Table
STEP 03
Adjust extendable beam (E) to desired length using markers and secure beam at
that length using screws provided
Need help! Call us on 1300 527 665
E
2000
1900 1800 1700 1600 1500 1400 1300 1200
50
50
www.jasonl.com.au
6 of 11
ASSEMBLY INSTRUCTIONS
Quadro A Wood Leg Counter Table
STEP 04
Adjust extendable beams (F) to desired length.
1 Remove plastic inserts 2 Loosen 2 bolts on beam using allen key 3 Extent
lower beam to the same distance as upper beam 4 Insert plastic inserts back
into the beam
3
2 F
1 1
2
Need help! Call us on 1300 527 665
www.jasonl.com.au
7 of 11
ASSEMBLY INSTRUCTIONS
Quadro A Wood Leg Counter Table
STEP 05
TOP VIEW
STEP 06 I
I E
Attach Upper Beam (E) to legs using nut insert. See point attached
Need help! Call us on 1300 527 665
Frame looks like this. Using Allen Key, attach Upper Beam (E) with Sockets (I).
www.jasonl.com.au
8 of 11
ASSEMBLY INSTRUCTIONS
Quadro A Wood Leg Counter Table
STEP 07
I
F I
I
Frame looks like this. Using Allen Key. Tighen Sockets (I) on the Lower Beam
(F) using Allen Key (O). Insert plastic spacers to improve regidity. Attach
two Sockets (I) to the side of the lower side beams (as shown in the picture).
Need help! Call us on 1300 527 665
www.jasonl.com.au
9 of 11
ASSEMBLY INSTRUCTIONS
Quadro A Wood Leg Counter Table
STEP 08
L
TABLE TOP BOTTOM VIEW
nut insert
nut insert
Place desktop ontop of frame. Nut inserts in top will align with plastic
joiner brackets using M6x30MM (L) sockets attached top to frame.
Need help! Call us on 1300 527 665
www.jasonl.com.au 10 of 11