BOSCH SMV4EVX00E-46 Dishwasher User Guide

BOSCH SMV4EVX00E-46 Dishwasher

Product Information

The dishwasher is a home appliance that is designed to clean and sanitize tableware. It comes with various features and settings to provide efficient cleaning results. The dishwasher can be connected to a mobile device through the Home Connect app, allowing users to conveniently change settings and monitor the appliance remotely.

Setting up Home Connect

To set up Home Connect, follow these steps:

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app to establish the connection.

Water Hardness Settings
The dishwasher offers different water hardness settings to ensure optimal cleaning performance. Refer to the table below for the available settings:

Refer to the instruction manual for country-specific units and more details on water hardness settings.

Adding Special Salt
To add special salt to the dishwasher, follow these steps:

1. Unscrew the lid of the special salt dispenser.
2. If it’s the initial start-up, fill the dispenser with water.
3. Add the special salt to the dispenser, ensuring no detergent is added.
4. Place the lid back on the dispenser and turn to close.

Adding Rinse Aid
To add rinse aid to the dishwasher, follow these steps:

1. Press the catch on the lid of the rinse aid dispenser and lift it.
2. Add rinse aid up to the maximum mark.
3. Close the lid of the rinse aid dispenser until it clicks into position.

Product Usage Instructions: Dishwasher

How to Use Your Appliance

1. Load the tableware into the dishwasher, ensuring it is suitable for dishwashers and removing large food remnants.
2. Add detergent to the dry detergent dispenser according to the recommended amount.
3. Switch on the dishwasher.
4. Select the desired programme based on your cleaning needs.
5. Start the programme to initiate the cleaning cycle.
6. At the end of the programme, remove the tableware from the dishwasher.
7. To cancel a program, press and hold the cancel button for approximately 4 seconds.

Cleaning Filters
After each wash, it is important to check and clean the filters to maintain optimal performance. Refer to the instruction manual for detailed instructions on how to clean the filters. Before using for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Overview

Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here. A table of country-specific units can be found in the instruction manual.

Hardness range/ mmol/l /Setting value

• Soft /0 – 1.1 /H00
• Soft /1.2 – 1.4 /H01
• Medium /1.5 – 1.8 /H02
• Medium /1.9 – /2.1 H03
• Medium 2.2/ – 2.9 /H04
• Hard /3.0 – 3.7 /H05
• Hard /3.8 – 5.4/ H06
• Hard /5.5 – 8.9/ H07

Setting the water softening system

1. Press .
2. To open the basic settings, press . for 3 seconds.
   • The display shows Hxx.
   • The display shows set.
3. Press repeatedly until the right water hardness has been set.
4. To save the settings, press . for 3 seconds.

Programmes

The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

OVERVIEW

Adding special salt
To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts.

1. Unscrew the lid of the dispenser for special salt and remove.
2. On initial start-up: Fill the dispenser right up with water.
3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid of the dispenser for rinse aid  1 and lift 2.
2. Add rinse aid up to the max mark.
3. Close the lid of the dispenser for rinse aid.
   • The lid clicks into position.

Adding detergent

1. Add the detergent to the dry detergent dispenser.
2. Close the lid of the detergent dispenser.
   • The lid clicks into position.

How to use your appliance

1. Load the tableware.
   Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely.

2. Add detergent.

3. Switch on the appliance .

4. Select the programme.

5. Start the programme .

6. Remove the tableware at the end of the programme.

7. To cancel the programme, press for approx. 4 seconds.
   The programme is cancelled and ends after approx. 1 minute.

Cleaning

Cleaning filters

1. After each wash check the filters for residue.
2.  Turn the coarse filter anticlockwise  1 and remove the filter system 2.
3. Pull down the micro filter to remove.
4. Press the locking catches  1 together and lift the coarse filter out 2.
5. Clean the filter elements under running water.
6. Re-assemble the filter system.
7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

Cleaning spray arms

1. Unscrew the upper spray arm  1 and pull down to remove 2.
2. Pull up the lower spray arm to remove.
3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
4. Insert the lower spray arm.
   • The spray arm clicks into position.
5. Insert the upper spray arm and screw it firmly in place.

Clean wastewater pump

1. Disconnect the appliance from the power supply.
2. Remove the filter system.
3. Scoop out any water.
4. Prise off the pump cover using a spoon and grip it by the crosspiece.
5. Lift the pump cover inwards at an angle and remove.
6. Remove any remnants of food and foreign bodies in the area of the impeller.
7. Insert the pump cover  1 and press down 2.
   • The pump cover clicks into position.
8. Install the filter system.

Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>