EUFAB 11575 Strap Frame Mount Instruction Manual

EUFAB 11575 Strap Frame Mount

Product Information

The product is a strap frame mount designed to secure a bicycle to a U-shaped bracket on a bicycle rack. It comes in different variations with the following item numbers and specifications:

Product Usage Instructions

Proper Use of the Product

The frame holder (item numbers 11575, 11576, 11577, and 11578) is intended to secure a bicycle to the U-shaped bracket of a bicycle rack. The frame holder (item number 11579) is used to secure a bicycle to another bicycle, providing additional theft
protection. It is important to use the product only for its intended purpose and follow all safety instructions.

Safety Precautions

Before using the product, read the operating instructions carefully and follow all safety instructions to prevent personal injury, damage to the device, or property damage. Store the original packaging, receipt, and operating instructions for future reference. When passing on the product, include the operating instructions.

Mounting the Frame Holder

To mount the frame holder (item numbers 11575, 11576, 11577, and 11578), follow these steps:

1. Unlock the lever as shown in Image 2.
2. Place the frame holder on the U-shaped bracket of the bicycle rack.
3. Secure the frame holder by moving the tension lever back and forth as shown in Image 3.
4. For mounting on a third bicycle, tighten the strap by pulling it firmly.

Maintenance and Care

Regular maintenance and care are important to ensure the proper functioning of the frame holder. Refer to the maintenance instructions provided in the user manual for detailed information.

Notes Regarding Environmental Protection

Dispose of the product and its packaging in accordance with local environmental regulations. Avoid throwing them in regular waste bins.

Contact Information

EAL GmbH Otto-Hausmann-Ring 107 42115 Wuppertal, Germany
Email: info@eal-vertrieb.com
Website: www.eal-vertrieb.com

WARNING!
Please read the operating instructions carefully prior to use and observe all safety instructions!Not observing such may lead to personal injury, damage to the device or to your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the product, please include these operating instructions as well. Please check the contents of package for integrity and completeness prior to use!

PROPER USE OF THE PRODUCT

The frame holder (item numbers 11575, 11576 11577 and 11578) is designed to be used to secure a bicycle to the U-shaped bracket of a bicycle rack. The frame holder (item number 11579) is used to secure a bicycle to a bicycle. The lock o˝ ers the bicycle additional protection from theft.
This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist knowledge. Keep children away from the device.
The device is not designated for commercial use.
Use according to the intended purpose also includes the observance of all information in these operating instructions, particularly the ob-servance of the safety notes. Any other utilisation is considered to be contrary to the intended purpose and may lead to material damage or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use

SCOPE OF DELIVERY

• 1 x Frame holder with two keys.
• 1 x Operating instructions

SPECIFICATIONS

SAFETY PRECAUTIONS

• The warning triangle indicates all instructions which are important for safety. Always follow these otherwise you could injure yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children without supervision.
• Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the frame mount!
• For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
• If the frame holder is visibly damaged, safe use is no longer possible. The frame holder may thus no longer be used.
• Observe the speciÿ cations and safety precautions in the instructions for your bicycle rack!

OPERATING INSTRUCTIONS

OVERVIEW

1. U shaped bracket cu˝
2. Lock
3. Locking and release lever
4. Strap
5. Frame protector
6. Key

MOUNTING THE FRAME HOLDER

11575, 11576, 11577 AND 11578°

Rotate the frame mount anti-clockwise until the locking mechanism is extended su˙ ciently that the U-shaped bracket cu˝ can be opened, Figure 2. Open the U-shaped bracket cu˝ and place it around the shaft of the U-shaped bracket. Close the U-shaped bracket cu˝ and push the locking mechanism down. Rotate the frame mount clockwise to such an extent that the clip can no longer be opened. Align the frame holder in such a way that it is roughly parallel to the direction of travel. Now turn the frame mount to tighten the frame holder.

Press the locking lever, Figure 3, down and pull the strap (Position 4 in the overview) out of the lock. Wrap the strap around an appropriate point of the bicycle frame and insert back into the lock. Tighten the strap lightly. Arrange the frame protector (Position 5 in the overview) in such a way that the bicycle frame does not rub up against the strap during the journey. Tighten the strap by moving the locking lever backwards and forwards, Figure 3.

If your bicycle has a carbon frame, make sure to not tighten the strap too ÿ rmly, since this may damage the frame.
No electrical or brake cables may be crushed.

ASSEMBLING THE FRAME HOLDER ˜11579°
Press the locking lever, Figure 3, down and pull the strap (Position 4 in the overview) out of the lock. Repeat this procedure on the other side of the frame holder as well. Wrap the strap around an appropriate point of the second bicycle frame and insert back into the lock. Tighten the strap lightly. Arrange the frame protector (Position 5 in the overview) in such a way that the bicycle frame does not rub up against the strap du-ring the journey. Now place the third bicycle on the bicycle rack. Wrap the strap of the other end of the frame holder around an appropriate point of the third bicycle frame and insert back into the lock. Tighten the strap lightly. Here, align the frame protector correctly. Tighten the strap on the second bicycle by moving the locking lever backwards and forwards, Figure 3. Then tighten the strap on the third bicycle.
Lock the lock of the frame holder to protect your bicycle against theft.

CAUTION
Before travelling, you must ÿ rst secure the bicycle in accordance with the instructions of your bicycle rack (tensioning straps, safety strap etc.)
The frame holder may result in minor pressure points on the bicycle frame and damaged to the paintwork. Protect the bicycle frame, for example, using protective ÿ lm.

MAINTENANCE AND CARE

Clean the frame holder using a slightly moist, soft cloth and a mild cleaning agent. Do not use aggressive cleaning agents, solvents or petrol. Ensure that no cleaning agents or liquids enter the tube of the frame holder.
Occasionally lubricate the lock with a resin-free oil.
Store the frame holder in a dry place.

NOTES REGARDING ENVIRONMENTAL PROTECTION

Dispose of the frame holder in accordance with the laws and conditions in your country.

CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107 42115 Wuppertal, Germany
+ 49 (0)202 42 92 83 0
+ 49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com

References

• vertrieb.com
• Vertrieb Kfz-, Caravan-, Anhänger-und, Fahrradträger und Zubehör

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>