INDESIT 83Q60 Induction Hob Instruction Manual
- June 4, 2024
- INDESIT
Table of Contents
- SAFETY INSTRUCTIONS
- INSTALLATION
- ELECTRICAL CONNECTION
- PRODUCT DESCRIPTION
- CONTROL PANEL
- ACCESSORIES
- FIRST TIME USE
- DAILY USE
- INDICATORS
- COOKING TABLE
- MAINTENANCE AND CLEANING
- TROUBLESHOOTING
- SOUNDS PRODUCED DURING OPERATION
- AFTER SALES SERVICE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
83Q60 Induction Hob
Instruction Manual
SAFETY INSTRUCTIONS
Download the complete instruction manual on http://docs.indesit.eu or call
the phone number shown on the warranty booklet.
Before using the appliance, read these safety instructions. Keep them nearby
for future reference.
These instructions and the appliance itself provide important safety warnings
to be observed at all times. The manufacturer declines any liability for
failure to observe these safety instructions, for inappropriate use of the
appliance or for the incorrect setting of controls.
WARNING: If the hob surface is cracked, do not use the appliance – the
risk of electric shock.
WARNING: Danger of fire: Do not store items on cooking surfaces.
CAUTION: The cooking process has to be supervised. A short cooking
process has to be supervised continuously.
WARNING: Unattended cooking on a hob with fat or oil can be dangerous –
risk of fire. NEVER try to extinguish a fire with water: instead, switch off
the appliance and then cover the flame e.g. with a lid or a fire blanket.
Do not use the hob as a work surface or support.
Keep clothes or other flammable materials away from the appliance, until all
the components have cooled down completely – the risk of fire.
Metallic objects such as knives, forks, spoons, and lids should not be placed
on the hob surface since they can get hot.
Very young children (0-3 years) should be kept away from the appliance. Young
children (3-8 years) should be kept away from the appliance unless
continuously supervised.
Children from 8 years old and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge can use this
appliance only if they are supervised or have been given instructions on safe
use and understand the hazards involved.
Children must not play with the appliance. Cleaning and user maintenance must
not be carried out by children without supervision.
After use, switch off the hob element by its control and do not rely on the
pan detector.
WARNING: The appliance and its accessible parts become hot during use.
Care should be taken to avoid touching heating elements. Children less than 8
years of age shall be kept away unless continuously supervised.
PERMITTED USE
CAUTION: the appliance is not intended to be operated by means of an
external switching device, such as a timer, or a separate remote-controlled
system.
This appliance is intended to be used in household and similar applications
such as staff kitchen areas in shops, offices, and other working environments;
farm houses; by clients in hotels, motels, bed & breakfasts, and other
residential environments.
No other use is permitted (e.g. heating rooms).
This appliance is not for professional use. Do not use the appliance outdoors.
INSTALLATION
The appliance must be handled and installed by two or more persons – the risk
of injury. Use protective gloves to unpack and install – the risk of cuts.
Installation, including water supply (if any), electrical connections, and
repairs must be carried out by a qualified technician. Do not repair or
replace any part of the appliance unless specifically stated in the user
manual. Keep children away from the installation site. After unpacking the
appliance, make sure that it has not been damaged during transport. In the
event of problems, contact the dealer or your nearest After-sales Service.
Once installed, packaging waste (plastic, styrofoam parts, etc.) must be
stored out of reach of children – the risk of suffocation. The appliance must
be disconnected from the power supply before any installation operation – the
risk of electric shock. During installation, make sure the appliance does not
damage the power cable – the risk of fire or electric shock. Only activate the
appliance when the installation has been completed.
Carry out all cabinet cutting operations before fitting the appliance and
remove all wood chips and sawdust.
If the appliance is not installed above an oven, a separator panel (not
included) must be installed in the compartment under the appliance.
ELECTRICAL WARNINGS
It must be possible to disconnect the appliance from the power supply by
unplugging it if a plug is accessible, or by a multi-pole switch installed
upstream of the socket in accordance with the wiring rules and the appliance
must be earthed in conformity with national electrical safety standards.
Do not use extension leads, multiple sockets, or adapters. The electrical
components must not be accessible to the user after installation. Do not use
the appliance when you are wet or barefoot. Do not operate this appliance if
it has a damaged power cable or plug, if it is not working properly, or if it
has been damaged or dropped.
If the supply cord is damaged, it must be replaced with an identical one by
the manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard – the risk of electric shock.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched off and disconnected from
the power supply before performing any maintenance operation; never use steam
cleaning equipment – the risk of electric shock.
Do not use abrasive or corrosive products, chlorine-based cleaners, or pan
scourers.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycling
symbol .
The various parts of the packaging must therefore be disposed of responsibly
and in full compliance with local authority regulations governing waste
disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials.
Dispose of it in accordance with local waste disposal regulations. For further
information on the treatment, recovery and recycling of household electrical
appliances, contact your local authority, the collection service for
household waste or the store where you purchased the appliance. This appliance
is marked in compliance with European Directive 2012/19/EU, Waste Electrical
and Electronic Equipment (WEEE) and with the Waste Electrical and Electronic
Equipment regulations 2013 (as amended).
By ensuring this product is disposed of correctly, you will help prevent
negative consequences for the environment and human health.
The symbol on the product or on the accompanying documentation indicates that
it should not be treated as domestic waste but must be taken to an appropriate
collection center for the recycling of electrical and electronic equipment.
ENERGY SAVING TIPS
Make the most of your hot plate’s residual heat by switching it off a few
minutes before you finish cooking.
The base of your pot or pan should cover the hot plate completely; a container
that is smaller than the hot plate will cause energy to be wasted.
Cover your pots and pans with tight-fitting lids while cooking and use as
0little water as possible. Cooking with the lid off will greatly increase
energy consumption.
Use only flat-bottomed pots and pans.
DECLARATION OF CONFORMITY
This appliance meets Ecodesign requirements of European Regulation 66/2014 and
The Ecodesign for Energy-Related Products and Energy Information (Amendment)
(EU Exit) Regulations 2019 in compliance with the European standard EN
60350-2.
NOTE
People with a pacemaker or similar medical device should use care when
standing near this induction cooktop while it is on. The electromagnetic field
may attect the pacemaker or similar device. Consult your doctor or the
manufacturer of the pacemaker or similar medical device for additional
information about its effects on the electromagnetic fields of the induction
cooktop.
INSTALLATION
ELECTRICAL CONNECTION
An electrical connection must be made before connecting the appliance to the
electricity supply.
Installation must be carried out by qualified personnel who know the current
safety and installation regulations. Specifically, installation must be
carried
out in compliance with the regulations of the local electricity supply
company.
Make sure the voltage specified on the data plate located on the bottom of the
appliance is the same as that of the home.
Regulations require that the appliance be earthed: use conductors (including
the earth conductor) of the appropriate size only.
R | black |
---|---|
S | brown |
T | blue (gray)-blu (grigio) |
=E | yellow/green |
N | blue |
PRODUCT DESCRIPTION
CONTROL PANEL
1. On/O button | 6. Cooking time indicator |
---|---|
2. Cooking level selected | 7. Timer activation button |
3. Zone selection indicator | 8. Power and cooking time adjustment buttons |
4. Cooking zone selection button | 9. Indicator light – function active |
5. Timer indicators active for the selected zone | 10. Child lock button – 3 |
seconds
ACCESSORIES
POTS AND PANS
Only use pots and pans made from ferromagnetic material that are suitable for use with induction hobs:
- enameled steel
- cast iron
- special pots and pans in stainless steel, suitable for induction cooking
Check for the symbol (usually stamped on the bottom) to determine whether a
pot is suitable. A magnet may be used to check whether pots are magnetic.
The quality and the structure of the pot base can alter cooking performance.
Some indications for the base’s diameter do not correspond to the actual
diameter of the ferromagnetic surface.
Some pots and pans have only a part of the bottom in a ferromagnetic material,
with parts in another material not suitable for induction cooking. These areas
may heat up at different levels or lower temperatures. In certain cases, where
the bottom is made mainly of non-ferromagnetic materials, the hob might not
recognize the pan and therefore not switch on the cooking zone.
To ensure optimum efficiency, always use pots and pans with flat bottoms that distribute the heat evenly. If the bottom is uneven, this will affect power and heat conduction.
Empty pots or pots with a thin base
Do not use empty pots or pans when the hob is on. The hob is equipped with an
internal safety system that constantly monitors the temperature, activating
the “automatic off“ function where high temperatures are detected. When used
with empty pots or pots with thin bases, the temperature may rise very
quickly, and the “automatic off“ function may not be triggered immediately,
damaging the pan or the hob surface. If this occurs, do not touch anything and
wait for all components to cool down.
If any error messages appear, call the service center.
Minimum diameter of pot/pan base for the different cooking areas To ensure
that the hob functions properly, use pots of a suitable minimum diameter
(refer to the drawing below).
Always use the cooking zone that best corresponds to the minimum diameter of
the bottom of the pot.
Place the pot making sure it is well centered on the cooking zone in use.
It is recommended not to use pots that exceed the perimeter of the cooking
zone in use.
ADAPTER FOR POTS/PANS UNSUITABLE FOR INDUCTION
Using this accessory makes it possible to use pots and pans that are not
suitable for induction hobs. It is important to bear in mind that using it
affects efficiency and, consequently, the time needed to heat food. Its use
should be limited because the temperatures reached on its surface depend
significantly on the pot/pan used, its atness, and the type of food being
cooked. Using a pot or pan with a smaller diameter than the adapter disc may
cause heat to build up that is not transmitted to the pot or pan, which could
blacken both the hob and the disc. Adapt the diameter of your pots/pans and
the hob to the diameter of the adapter.
FIRST TIME USE
POWER MANAGEMENT
At the time of purchase, the hob is set to the maximum possible power.
Adjust the setting concerning the limits of your home’s electrical system as
described in the following paragraph.
N.B: Depending on the power selected for the hob, some of the cooking zone
power levels and functions (e.g. boil or fast heating) could be automatically
limited to prevent the selected limit from being exceeded.
To set the power of the hob:
Once you have connected the device to the mains power supply, you can set the
power level within 60 seconds.
Press the ”+” button for at least 3 seconds. The display shows ”PL”.
Confirm by pressing .
Use the ”+” and ”−” buttons to select the desired power level.
The power levels available are 2.5 kW – 4.0 kW – 6.0 kW – 7.2 kW.
Confirm by pressing .
The power level selected will stay in the memory even if the power supply is
interrupted.
To change the power level, disconnect the appliance from the mains for at
least 60 seconds, plug it back in, and repeat the above steps.
If an error occurs during the setting sequence, the ”EE” symbol will appear,
and you will hear a beep. If this happens, repeat the operation.
If the error persists, contact the After-Sales Service.
ACOUSTIC SIGNAL ON/OFF
To switch the acoustic signal on/off:
- Connect the hob to the power supply;
- Wait for the switch-on sequence;
- Within 60 seconds, press the buttons ”+” and simultaneously for at least 5 seconds.
DEMO MODE (reheating deactivated, see the section on ”Troubleshooting”)
To switch the demo mode on and off:
- Connect the hob to the power supply;
- Wait for the switch-on sequence;
- Within 60 seconds, press the cooking zone selection buttons in the top left and top right simultaneously for at least 3 seconds (as shown below);
- ”DE” will show on the display.
DAILY USE
SWITCHING THE HOB ON/OFF
To turn the hob on, press the power button for around 1 second.
To turn the hob off, press the same button again, and all cooking zones will
be deactivated.
POSITIONING
Locate the desired cooking zone by referring to the position symbols.
Do not cover the control panel symbols with the cooking pot.
Please note: In the cooking zones close to the control panel, it is advisable
to keep pots and pans inside the markings (taking both the bottom of the pan
and the upper edge into consideration, as this tends to be larger).
This prevents excessive overheating of the keypad. When grilling or frying,
please use the rear cooking zones wherever possible.
ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING POWER LEVELS
To activate the cooking zones:
Select the pre-selected cooking zone by pressing the corresponding zone
selection button. The display will show level ”0”.
Each cooking zone has different power levels that can be adjusted using the
”+”/”−” buttons, from a minimum of 1 to a maximum of 9.
Some cooking zones have a fast heating function (Booster), shown on the
display with the letter “P“.
To
deactivate the cooking zones:
Select the cooking zone to be switched off by pressing the corresponding zone
selection button (a dot will light up on the display, to the power level
indicator’s bottom right). Press the “−“ to set the level to “0“.
INDICATORS
RESIDUAL HEAT
If “H“ appears on the display, this means that the cooking zone is hot. The
indicator lights up even if the zone has not been activated but has been
heated due to the adjacent zones’ use or because a hot pot has been placed on
it.
When the cooking zone has cooled down, the ”H” disappears.
POT INCORRECTLY POSITIONED OR MISSING
This symbol appears if the pot is not suitable for induction cooking, is not
positioned correctly, or is not of an appropriate size for the cooking zone
selected. If no pot is detected within 30 seconds of making the selection, the
cooking zone switches off.
COOKING TABLE
POWER LEVEL| TYPE OF COOKING| LEVEL USE (indicating cooking
experience and habits)
---|---|---
Maximum
power
a| P| Fast heating/Booster| Ideal for rapidly increasing food temperature to a
fast boil (for water) or for rapidly heating cooking liquids.
8 – 9| Frying – boiling| Ideal for browning, starting to cook, frying deep-
frozen products, and fast boiling.
High power| 7 – 8| Browning – sauteing – boiling –
grilling| Ideal for sautéing, maintaining a lively boil, cooking, and grilling
(for a short period of time, 5-10 minutes).
6 – 7| Browning – cooking – stewing –
sautéing – grilling| Ideal for sautéing, maintaining a light boil, cooking and
grilling (for a medium period of time, 10-20 minutes), and preheating
accessories.
Medium power| 4 – 5| Cooking – stewing – sautéing –
grilling| Ideal for stewing, maintaining a gentle boil, and cooking (for a
long period of time). Creaming pasta.
3 – 4| Cooking – simmering – thickening
– creaming| Ideal for long-cooking recipes (rice, sauces, roasts, fish) with
liquids (e.g. water, wines, broth, milk), creaming pasta.
2 – 3| Ideal for long-cooking recipes (less than a liter in volume: rice,
sauces, roasts, fish) with liquids (e.g. water, wines, broth, milk).
Low power| 1 – 2| –
Melting – defrosting keeping
food warm – creaming| Ideal for softening butter, gently melting chocolate,
thawing small products, and keeping just-cooked food warm (e.g. sauces, soups,
minestrone).
1| Ideal for keeping just-cooked food warm, for creaming risottos, and for
keeping serving dishes warm (with induction-suitable accessory).
Zero power| 0| Support surface| Hob in stand-by or off mode (possible end-of-
cooking residual heat, indicated by an “H”).
MAINTENANCE AND CLEANING
WARNING
- Do not use steam cleaning equipment.
- Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (”H”) is not displayed.
Important:
-
Do not use abrasive sponges or scouring pads as they may damage the glass.
-
After each use, clean the hob (when it is cool) to remove any deposits and stains from food residue.
-
A surface that is not kept suitably clean may reduce the sensitivity of control panel buttons.
-
Use a scraper only if residues are stuck to the hob. Follow the scraper manufacturer’s instructions to avoid scratching the glass.
-
Sugar or foods with high sugar content can damage the hob and must be immediately removed.
-
Salt, sugar, and sand could scratch the glass surface.
-
Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow
the Manufacturer’s instructions). -
Spills of liquid in the cooking zones can cause the pots to move or vibrate.
-
After cleaning the hob, dry thoroughly.
TROUBLESHOOTING
- Check that the electricity supply has not been shut off.
- If you cannot turn the hob off after using it, disconnect it from the power supply.
- If alphanumeric codes appear on the display when the hob is switched on, consult the following table for instructions.
Please note: The presence of water, liquid spilled from pots, or any objects resting on any of the hob buttons can accidentally activate or deactivate the control panel lock function.
DISPLAY CODE | DESCRIPTION | POSSIBLE CAUSES | SOLUTION |
---|---|---|---|
FOE1 | Cookware is detected but it is not compatible with the requested | ||
operation. | The cookware is not well positioned in the cooking zone, or it is | ||
not compatible with one or more cooking zones. | Press the On/Off button twice |
to remove the FOE1 code and restore the functionality of the cooking zone.
Then, try to use the cookware with a different cooking zone, or use different
cookware.
FOE7| Wrong power cord connection.| The power supply connection is not exactly
as indicated in the “ELECTRICAL CONNECTION” paragraph.| Adjust the power
supply connection
according to the “ELECTRICAL CONNECTION” paragraph.
FREE| The control panel switches off because of excessively high
temperatures.| The internal temperature of electronic parts is too high.| Wait
for the hob to cool down before using it again.
FOE9| The cooking zone turns off when the temperatures are too high.| The
internal temperature of electronic parts is too high.| Wait until the cooking
area has cooled off before using it again.
FOE2, FOE4, FOE6, FOES, FOEC, F1 E1, F2E1, F6E1, F6E3, F7E5, F7E6| Disconnect
the hob from the power supply.
Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service center and specify the error code
that appears on the display.
d E (when the hob is MO| The hob does not switch heat up. The functions do not
come on.| DEMO MODE on.| Follow the instructions in the “DEMO
MODE” paragraph.
e.g. P-5
(Power level lower than
level requested!| The hob automatically sets a minimum power level to ensure
that the cooking zone can be used.| The power regulator limits the power
levels in accordance with the maximum value set for the hob.| See paragraph
“Power management”.
SOUNDS PRODUCED DURING OPERATION
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
characteristics of the pan bottoms (for example, when the bottoms are made
from different layers of material or are irregular).
These noises may vary according to the type of cookware used and the amount of
food it contains and are not the symptom of something wrong.
AFTER SALES SERVICE
To receive complete assistance, please register your product on www.indesit.com/register.
BEFORE CALLING THE AFTER-SALES SERVICE:
- See if you can solve the problem by yourself with the help of the TROUBLESHOOTING suggestions.
- Switch the appliance off and back on again to see if the fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN TOUCH WITH THE
NEAREST AFTER-SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet or follow
the website’s instructions on www.indesit.com.
When contacting our Client After sales service, always specify:
-
a brief description of the fault;
-
the type and exact model of the appliance;
-
the serial number (number after the word SN on the rating plate located under the appliance). The serial number is also indicated in the documentation;
-
your full address;
-
your telephone number.
If any repairs are required, please contact an authorized after-sales service
(to guarantee that original spare parts will be used and repairs carried out
correctly).
In the case of flush-mounted installation, call the After Sales Service to
request assembly of screws kit 4801 211 00112.
In case of installation is not over a built-in oven, you can call the After
Sales Service to buy the divider kit C00628720 (cooktop 60 and 65 cm) or
C00628721 (cooktop 77 cm).
If you prefer not to buy the divider kit please ensure that a separator is
installed according to the installation instructions.
References
- Whirlpool Docs
- ID | Indesit - Affordable, Reliable Kitchen & Home Appliances
- Register | Indesit - Affordable, Reliable Kitchen & Home Appliances
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>