V I V O MOUNT-KB08S Black Under Desk Keyboard Tray with Swinging Height Adjustment Instruction Manual
- October 30, 2023
- V I V O
Table of Contents
V I V O MOUNT-KB08S Black Under Desk Keyboard Tray with Swinging Height
Adjustment Instruction Manual
SKU: MOUNT-KB08S
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product. Instruction Manual
https://vivo-us.com/products/mount-kb08s
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com Chat live with an agent
309-278-5303
WARNING
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Assemble Keyboard Tray Set (A) by placing Connecting Plates (B) into the
insets on underneathside of Tray. Secure with M5x12mm Screws (S-A) and a
Phillips screwdriver.
STEP 2
Install Keyboard Stop (D) onto assembled Keyboard Tray using M5x12mm Screws
(S-A) and a Phillips screwdriver.
STEP 3
Secure Height Adjustable Bracket Set (C) to the sides of Keyboard Tray (A)
using M5x12mm Screws (S-A) and a Phillips screwdriver.
STEP 4
Unfold the Adjustable Brackets (C) by pressing down on the levers and pulling
the top bracket up. Make sure the brackets are adjusted to the same level for
installation.
STEP 5
Hold the keyboard tray assembly against the underside of the desk 0.5” (12mm)
from the edge and mark drilling locations with a pencil. Drill 3/8” (10mm)
deep holes using a 1/8” (3mm) drill bit. Mount keyboard tray assembly using
M5x14mm Screws (S-B) and a Phillips screwdriver.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
**** 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Under Desk Keyboard Tray with Swinging Height Adjustment – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>