EILLEO US11-1213 Electric Scooter with Seats for Adults User Guide

EILLEO US11-1213 Electric Scooter with Seats for Adults

PRODUCT SAFETY NOTICE

Like any mode of transportation, there are inherent hazards associated with this product’s use (e.g.: losing control, falling off, or riding into a hazardous situation). Please read and be sure to follow ALL INSTRUCTIONS and SAFETY RECOMMENDATIONS in this user manual prior to and when riding your electric bike.

This Foldable Electric Bike can only be used with the supplied JY-420200 charger.

Before you ride

• Always check your device before use, if you notice that parts are damaged, that the battery has a very low load-bearing, that the tires are worn or abnormally inflated, or that there is a strange noise or a bad operation please do not use your device and contact an authorized repairer or customer service.

• Regularly check the tightness of the various bolted components, especially the wheel axles, the folding system, the steering, and the brakes. Always check that the steering system is correctly adjusted and that all connecting elements are tight and not broken.

• Check the tires for proper inflation and cracks on the walls of the tires.
  Keeping the tires properly maintained and at the right PSI pressure will help prevent flats and damage.

• The brake lever is shipped in a downward position in order to prevent damage.

• Check all cables and cable housings for fraying, cracks, breaks, rust, or corrosion. If anything is damaged, replace immediately – do not ride. Additionally, check the brake pad for any damage as it will wear overtime and eventually need replacement. If a replacement of the brake pad or any other part is needed, please contact customer support for replacement service.

• Ensure the saddle is in place at the correct height and the release bracket is securely fastened.

• Charge fully before your first use.

Protective equipment

• SAFETY GEAR, CLOTHING, AND FOOTWEAR: Please wear appropriate clothing and safety gear including shoes, kneepads, elbow pads, and an ASTM F1492 approved helmet. Avoid wearing anything that can drape over or get caught in/under the wheels. Wear closed-toe, flat shoes to maintain flexibility and stability.

Conditions to ensure good stability during use, transport, assembly or disassembly:

• You must strictly follow the safety instructions in this manual. The company cannot be held responsible for any injury or accident if the instructions have not been followed.

• Users must not exceed the weight indicated in the maximum weight specifications, otherwise, the driver may fall and injure themselves, or even damage the balance (stability) function of the device.

• Raise the kickstand and put both feet on the ground to maintain balance (stability) before starting.

• Please use this device only in authorized locations, if this location requires permission, please request it.

• Do not use the product on the roadway. The device is not an approved device.

• Please respect the pedestrians as you use the bike. Avoid frightening pedestrians, especially children and the elderly. When you pass a pedestrian slow down and leave plenty of room to pass.

• Do not lend your device to someone who has not been trained to use it.
  Be sure this person wears the appropriate protective gear.

• While driving, you may be exposed to unexpected hazards or dangerous situations, which may result in serious injury, please exercise caution.

• Do not ride in sand, puddles, mud, or other wet, damp or rugged surfaces as this may damage the electronic components of the unit.

• Attention, the brake can heat up during use. Do not touch after use.

• NOTE: This device is recommended for riders over the age of 15 and always with adult supervision for anyone under 18 years of age.

• ALWAYS FOLLOW LOCAL, STATE, AND FEDERAL LAWS WHEN OPERATING.
  This e-bike is considered a motor vehicle. DO NOT RIDE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. YOU CAN BE ARRESTED FOR DRIVING UNDERTHE INFLUENCE.

• SAFETY GEAR, CLOTHING AND FOOTWEAR: Please wear appropriate clothing and safety gear including shoes, kneepads, elbow pads and an ASTM F1492 approved helmet Avoid wearing anything that can drape over or get caught in/under the wheels. Wear dosed-toe, flat shoes to maintain flexibility and stability.

• MODIFICATIONS AND REPAIRS: This e-bike is a highly sophisticated electronic product that includes complex, technical circuitry. Attempting to repair or modify your unit WILL VOID all warranties. Only authorized repair centers may open and service the product.

By riding this e-bike, the user acknowledges and accepts personal responsibility of all risks associated with the use of the E-Bike, to yourself or others which may be sustained while using the e-bike.

Introduction

Thank you for choosing the electric bike.

This e-bike has been meticulously engineered at every step of production to bring an exceptional riding experience.

• Please inspect the unit upon unpacking for any signs of physical damage or defects.
• Ensure that the e-bike is fully charged before using. It will be partially charged upon arrival. Be sure to charge fully before the first use.

If you have questions, contact Customer Service:

About the Unit

This new type of mobility, entirely electric and non-polluting, will allow you to perform leisure activities.

Smoothly and without fatigue. Its 14 inches wheels along with brake discs allow you to enjoy your leisure comfortably and safely. The power of its 350Watt motor will allow you to climb gentle slopes without effort, the capacity of the battery will allow you to enjoy your bike throughout the day

What’s in the box

• E-bike
  

• Saddle*1

• Charging adapter*1
  

• Saddle*1

• User manual*1

• Multi-tool*1

Product Overview

Getting Started

Assemble the E Bike

Step 1
Lock the front wheels

Step 2
Install the

Step 3
Lock the body as shown

Step 4
Locking screw

Step 5
Locking folding device

Step 6
finished

Step 1
Special edition

Step 2
Special edition

Step 3
Special edition Locking screw

Technical Specifications

Height & Weight

PARAM ETRES| STANDARD
Size (folded)| 57”x13”x29.1”（1453374cm）
Size (unfolded)| 66.9″x26.4 “x0.91″（17067104cm）
Ground clearance| 9 inches
Wheel size| 12 Inches
Frame color| Black
Package weight| 60.6lb(27.5kg)
Product weight| 71.5lb（32.5kg）

Performance

PARAM ETRES| STANDARD
Min – Max load| 66-330lbs（30-150kg）
Maximum speed| 17.4mph/28km
Range| 20miles
Max gradient Climbing angle| 18°
Sealing| IP54
Motor & Battery

PARAM ETRES| STANDARD
Operating temperature| 14 to 113°F
Battery| 13Ah
Max motor power| 500W
Basic motor power| 350W
Charger voltage| 42V
Charging time| 4~5H
Braking system| Rear disc brakes
Vibration estimate: The total value of the vibrations, to which the hands and arms are exposed, does not exceed 2.5 m/s2.

Remarks: The factors, including battery power capacity, load, tire pressure, road environment, chain and wheel axle lubrication, etc., will affect the maximum speed. The cruising distance indicated in this manual file is the test result from the riding test conducted uninterruptedly with load of 60kg, at the speed of 15- 25km/h, and on the flat and hardened road surface, from full charge to full power consumption. Driving habits, temperature, load, tire pressure, road environment and other factors will affect the actual cruising distance.

How to Ride

Power On/Off

Before cycling, you need to use the key to unlock the controller of the electric bike, which will activate the power supply.

Riding the bike

•  Throttle mode: This e-bike can control the speed through the throttle and ride in a pure electric way.

Braking

The bike is equipped with rear and front brake for safe controlled riding experience.

When the brake leaver is applied, it cuts the electric motor preventing the slip effect and allowing faster and smoother braking.

Note: The brake must be used gently, the brake should not be applied too suddenly to avoid skidding or tipping. It is not possible to operate the accelerator during braking.

Display functions

Check battery power

When turned on the display will show the remaining battery charge. 5 bars for a full charge, 4 bars for 80% charge, 3 bars for 60% charge, etc.

Check that the charge bars are complete and that the light on the charging lead tuns green to be sure that the battery is fully charged.

Front and Rear Lights

The bike is equipped with front and rear lights to make riding the bike in low light conditions safer.

• To turn on the front and rear lights， please hold down the ‘ ‘key
• To turn off the front and rear lights, please hold down the ‘ ‘ key.
  

Note: The rear light will come on when the front or rear brake is activated.

Charging

Connecting the Charging Lead

The charge position is on the side of the bike.

• Plug the charging cable into the charging port. Make sure the connection is dry.
• Plug the other end of the charging cable into the wall socket. The indicator lamp of the charger is red when charging.
• After the charge has finished remove the cable and replace the port protector to avoiding the water ingress.

When the lamp changes green, the battery is full, please stop charging when the battery is full, or it will affect the battery life.

Charging Safety Tips

• Charge fully before the first use.
• The MAXIMUM charging time must not exceed 6 hours, if it is exceeded, it will affect the longevity of the battery.
• To maximize battery life, please charge once per month or after two days of cycling.
• Please use the batteries, chargers, and cables supplied by the original manufacturer and prevent the battery from being overcharged.
• Please make sure you use it in a dry environment. Chargers or cables should never be allowed to touch any water because it could lead to electric shocks. Do not touch with wet hands.
• If any failure occurs during charging, unplug immediately.
• Be sure to pull out the plug from the socket first and then pull the cable out from the e-bike.
• Do not allow the charger or cable to contact sharp or hot items.
• Perform a visual inspection of the charger and charger cables regularly. If the charger cable has obvious damage, do not use the charger to avoid further damage, please contact support for a replacement.
• Please do not repair the battery, charger or cable independently. Please contact us if there is any problem.

Maintenance

Brakes: Maintenance / Adjustments

To tighten or release the brakes, use the Hex/Allen key provided. Unscrew the nuts at the cables placed on the brake caliper and slightly pull the cable to shorten or lengthen it depending on the desired action.

Hexagonal wrench locked tightly

Pinch and tighten the brake cable

Shortening the cable (hanging out of the brake caliper) will release the brake tension. Extending the cable (hanging out of the brake caliper) will tighten the brake tension. Tighten the screw with a hex/Allen key while maintaining the cable at the desired length.

Test the cable tension with the corresponding brake handle.

Tire Pressure

The ideal pressure for the front and rear tires is 40-65PSI/2.8-4.5BAR.

Use a suitable inflator, check the tire pressure and if necessary re-inflate the inner tube.

Step 1: Remove the dust cap from the end of the air valve. (Photo 28)
Step 2: Connect the end of the inflator/tire pump. (Photo 29)
Step 3: Re-inflate the tire to2.8-4.5 BAR. (Photo 30)
Step 4: Disconnect the inflator/tire pump. (Photo 31)
Step 5: Screw the dust cap back onto the end of the air valve.

Cleaning

Before cleaning, make sure the bike is turned off, unplug the charging cable and cover the charging port. During the cleaning process, be careful to keep the water out of the charging port. To clean wipe the outer body of your unit with a soft, dry microfiber cloth. Check around the wheels and ensure there is no blockage.

Note: The waterproof and dustproof grade is IP54, which is anti-splash and anti-dust. Therefore, you should not immerse the electric bike in water, which will cause permanent damage to the bike.

Storage

Store the bike in a cool, dry place. Avoid direct sunlight. Avoid storing in wet conditions. When not used for a prolonged period of time, the battery may lose power. It should be tested at least every three months and recommended to keep a full charge at least once a month. In cold weather, the batteries may lose power faster because of low temperatures. Inappropriate storage will lead to battery life-shortening or may cause other problems. It is recommended to COVER the e-bike when storing. Avoid storing in high dust areas.

Disposal at End of Life

The battery and power equipment must be disposed of according to local regulations. Please dispose of all relevant parts through the authorized processing facility. This product must not be disposed of by incineration, landfilling, or mixing with household trash.

Improper disposal of the battery contained within this product may result in the battery heating up, rupturing, or igniting which may cause serious injury. The substances contained inside the battery present chemical risks to the environment.

The recommended disposal for this product at its end-of-life is to dispose of the entire unit at or through an e-waste recycling center, program, or facility. Local regulations and laws pertaining to the recycling and disposal of lithium-ion batteries and/or products containing them will vary according to country, state, and local governments. You must check laws and regulations corresponding to where you live in order to properly dispose of the battery and/or unit. It is the user’s responsibility to dispose of their waste equipment properly in accordance with local regulations and laws.
For additional information about where you should drop off your batteries and electrical or electronic waste, please contact your local or regional waste management office, your household waste disposal service, or your point-of sale.

WEEE Directive & Product Disposal

At the end of the serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical equipment or returned to the supplier for disposal.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC Rules. Its operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment

Documents / Resources

| EILLEO US11-1213 Electric Scooter with Seats for Adults [pdf] User Guide
US11-1213, US11-1213 Electric Scooter with Seats for Adults, Electric Scooter with Seats for Adults, Scooter with Seats for Adults, Seats for Adults
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>