MOEN 58912 Series Ash Two-Handle Widespread Lavatory Faucet with Waste Instruction Manual
- June 13, 2024
- Moen
Table of Contents
SPECIFICATIONS
Ash™
Two-Handle Widespread Lavatory Faucet with Waste
MODELS: 58912 series
58912 Series Ash Two-Handle Widespread Lavatory Faucet with Waste
NOTES:
The spout is designed to be installed through 1” (26mm) minimum diamter hole,
valve body installs through 1-1/4” (32mm) diameter holes. Maximum deck
thickness: 1-1/2” (38mm)
There is more than one version of this model.
Page down to identify the version you have.
DESCRIPTION
- Metal construction with various finishes identifed by suffix
- 1/2” IPS connections
- Designed to be installed on 8” to 16” centers
- Includes 50/50 pop-up waste assembly
- Six (6) individual boxes per master carton
OPERATION
- Lever style handles
- Hot side: Turn counterclockwise to open (clockwise to close)
- Cold side: Turn clockwise to open (counterclockwise to close)
- Operates with less than 5 lbs. of torque
- No grasping motion required to operate the faucet handle
- Features red/blue hot/cold termperature indicators
FLOW
- Water usuage is limited to these maximum flow rates as indicated by the corresponding product markings
- 1.2 gpm max (4.5L/min)at 60 psi
CARTRIDGE
- Ceramic disc technology
- Non-metallic, non-ferrous, and brass materials
- Single body construction for easy replacement
STANDARDS
- Third party certified to WaterSense® , ASME A112.18.1/ CSA B-125.1, and all applicable requirements referenced therein including NSF 61/9 & 372
- Products marked with 1.2 gpm are compliant with California water effciency requlations
- Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
- ADA for lever handles
WARRANTY
- Ten year limited warranty against defects in materials and manufacturing workmanship
- Refer to the installation instructions enclosed with each CFG product or call 1-888450-5522 for complete warranty information
CRITICAL DIMENSIONS DO
NOT SCALE
SPECIFICATION SHEET Models: 58912 series
Ash™
Two
Handle Widespread Lavatory With Waste
DESCRIPTION
- Metal construction with chrome finish
- 1/2″ IPS shanks
- Designed to be installed on 8″ to 16″ centers
- Includes 50/50 pop-up waste assembly
- Six (6) individual boxes per master carton
OPERATION
- Lever-style handle
- Hot side: Turn counterclockwise to open (clockwise to close)
- Cold side: Turn clockwise to open (counterclockwise to close)
- Will operate with less than 5 lbs. of torque
- No grasping motion required to operate the faucet handle
- Features red/blue hot/cold temperature indicators
FLOW
- Water usuage is limited to these maximum flow rates as indicated by the corresponding product markings
- 1.2 gpm max (4.5L/min)at 60 psi
CARTRIDGE
- Ceramic disc technology
- Non-metallic, non-ferrous, and brass materials
- Single body construction for easy replacement
STANDARDS
- Third party certified to WaterSense®, ASME A112.18.1/ CSA B-125.1, and all applicable requirements ref er enced therein including NSF 61/9 & 372
- Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
- Products marked with 1.2 gpm are compliant with California water efficiancy regulations
- ADA for lever handle
WARRANTY – RESIDENTIAL, COMMERCIAL
- Ten year limited warranty against defects in materials and manufacturing workmanship
- Refer to the installation instructions enclosed with each CFG product or call 1-888-450-5522 for complete warranty information
NOTE:
- The spout is designed to be installed through 1″ (26 mm) minimum diameter hole, valve body installs through 1-1/4″ (32 mm) diameter holes
- Maximum deck thickness: 1-1/2″ (38 mm)
CRITICAL
DIMENSIONS (DO NOT SCALE)
CLEVELAND FAUCET GROUP
25300 AL MOEN DRIVE
NORTH OLMSTED, OHIO 44070
888-450-5522
www.cfgonline.com
CFG- 58912
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>