Tozo Golden X1 Wireless Earbuds User Manual

TOZO Golden X1

The TOZO Golden X1 utilizes a combination of a 12mm dynamic driver and a customized Knowles balanced armature driver, delivering a Hi-Fi-level listening experience with an ultra-wide frequency response range of 12Hz to 44.1kHz that far exceeds your hearing range. It also supports LDAC high- definition audio decoding and has obtained Hi-Res Audio certification.

 Hybrid Dynamic Driver

 Balanced Armature Driver

 Environment And Active Noise Cancellation

 Charging Compatibility & LED Digital Display

TECH SPECS

TOZO Golden X1

• Hybrid Dynamic Driver & Balanced Armature Driver
• Balanced Armature Driver & Hi-Res Audio
• LDAC HD Audio-decoding
• OrigX Pro High Quality Sound
• Environment And Active Noise Cancellation
• Charging Compatibility & LED Digital Display
• Support TOZO APP & 16 Preset EQ Modes
• Ergonomic Design & Long Distance Connection

Black

The above image is for reference only. Please refer to the actual product for all criteria.

Earphone

Type: In-ear True Wireless

Model: X1

Audio quality

Driver: φ12 mm dynamic driver + Knowles balanced armature driver

Frequency response range: 12Hz – 44.1kHz

Audio codec: LDAC / AAC / SBC

Noise cancellation

Noise control modes:

Noise Cancellation / Leisure Mode / Custom Pattern / Reduce Wind Noise/

Transparency Mode / Noise Cancellation Off

Call Noise Cancellation: Triple-Microphone with ENC Call Noise Reduction

Battery Life

Battery capacity: 55mAh(earphones) / 500mAh(charging case)

Music play time (AAC, Default setting, 50% volume)*:

Max Noise Cancellation: 5h (single charge)

Noise Cancellation Off: 8h (single charge)

Charging

Cable Charge Time: 2h (earphones) /2h (charging case)

Charging port: USB Type-C

Charging input (charging case): 5V⎓500mA（USB-C）/5V⎓400mA（wireless charging）

Charging output (charging case): 5V⎓50mA*2

Charging input (earphones): 5V⎓50mA

Wireless charger: Qi wireless charging supported

Water resistance

Water resistance – earphone: IPX6

Bluetooth

Bluetooth version:BT 5.3

Effective Bluetooth range:10m

Weight and Dimensions

Weight (each ear):5.8g（±0.2g）

Weight (charging case):43g（±1g）

Weight (entire device):54.6g（±1g）

Dimensions of charging case:69.934.238.2mm

FAQ

Cannot answer a call

Check the setting of answering method on your cell phone and confirm if need some setting when connecting the Bluetooth device.

What should I do if the computer says they need a driver or transmitter

to connect the earbuds?

Here are some methods for your reference.

• Download a Bluetooth receiver to connect(in the computer settings)
• Kindly check if your computer’s Bluetooth version supports Bluetooth 5.0

How to adjust the volume by earbuds?

Long press L or R earbud to adjust the volume while playing music.

R earbud Volume +

L earbud Volume –

The volume adjustment is not available when it`s connected to a TV and computer.

Why the earbuds does not hold a charge?

1. Check if the metal connector is dirty, try to wipe it softly with dry cloth, paperclip or paper towels. (sweat or humidity may also lead to disconnection )

2. Please have the battery case fully charged at the beginning without putting the earbuds in.

• Swap the left and right earbuds to charge for a try.
• Put the left one in the right side of the case, so does the right earphone, which is put in the left side of the case.
• Confirm whether it’s the issue of battery case after operating steps above.

3. Reset could solve many problems occurred.

How to reset the earbuds?

Earbuds (or either one of earbuds) does not pair or connect/ Sound cuts in and out/ Earbuds cannot be found on Bluetooth Search

T10 Earbuds:

1. Before resetting, delete/remove all TOZO on Bluetooth, and turn off BT as well.
2. Press earbuds’ panel for 5 seconds to turn off (red light flashes) the device.
3. Seconds later, touch and hold both earbuds for 5 seconds till red/blue lights flashes simultaneously. Then touch both earbuds three times, once purple light flashes, reset competed.
4. At last, turn on the BT and re-connect.

T6 Earbuds:

1. Before resetting, delete/remove all TOZO on Bluetooth, and turn off BT as well.
2. Press earbuds’ panel for 5 seconds to turn off (red light flashes) the device.
3. Seconds later, touch and hold both earbuds for 5 seconds till red/blue lights flashes simultaneously. Then touch both earbuds three times quickly, once purple light flashes, reset competed.
4. At last, turn on the BT and re-connect.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>