Desoutter SLB001-L1000-SWS Electric Screwdriver with ESP1-LT Power Supply User Manual
- June 13, 2024
- Desoutter
Table of Contents
Desoutter SLB001-L1000-SWS Electric Screwdriver with ESP1-LT Power Supply
Product Information
- Product: SLB001-L1000-SWS electric screwdriver with ESP1-LT
- power supply
- Model: SLB001-L1000-SWS with power supply
- User Manual Part Number: 6151658730
- Date: 04/2022
- Page: 1 / 56
WARNING: This product can cause electric shock, fire, and/or serious injury. Please save all warnings and instructions for future reference.
Additional Information
Find more information and your Desoutter contacts at:
www.desouttertools.comSoftware and
documentation are available at: https://www.desouttertools.com/resource-
centreExploded views and spare parts lists are available in Service
Link at: www.desouttertools.com
Product Usage Instructions
Refer to the user manual part number 6151658730 for detailed instructions
on how to use the SLB001-L1000-SWS electric screwdriver with ESP1-LT power
supply. Make sure to follow all safety warnings and instructions provided in
the manual to avoid electric shock, fire, and serious injury. If you have any
questions or need further assistance, please contact Desoutter through their
website or customer support channels.
WARNING
Read all safety warnings (including the ones of the separately provided safety
instructions n° 6159930690) and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire, and/or serious
injury. Save all warnings and instructions for future reference.
- Find more information and your Desoutter contacts at: www.desouttertools.com
- Software and documentation are available at: https://www.desouttertools.com/resource-centre
- Exploded views and spare parts lists are available in the “Service Link” at: www.desouttertools.com
TECHNICAL DATA
SLB001-L1000-SWS
Torque *()**
| ****
Speed
| Rated input| ****
Body weight
---|---|---|---
in.lb
| ****
Nm
| Hi rpm| Lo rpm| ****
W
| ****
kg
| ****
lb
0.17-1.32| 0.02-0.14| 1000| 700| 15| 0.17| 0.375
(*) Torque values are indicative and may be influenced by the softness of the type of joint. Please contact our local sales representative for further details.
Suitable controller: ESP1-LT
Input voltage | 100 / 240VAC 50/60 Hz |
---|---|
Downstream output voltage | 9 VDC / 12VDC |
Downstream capacity | 2.5 A |
Weight – Kg (lb) | 0.144 (1.1) |
The data given in the table is indicative and can be changed without prior notice.
TECHNICAL DATA
Relation between torque and indication on the tool
WIRING DIAGRAM
A
Receptacle
| B
Cable
| CN2
Connector
---|---|---
1| Green| 1
2| Black| 2
3| Red| 3
A| Receptacle
---|---
B| Cable
CN2| Connector
C| Changeover switch
D| Stop switch
E| Start switch
F| BLDC Control board
G| Motor
OPTIONAL ACCESSORIES
Item | Description | Part No | Qty |
---|---|---|---|
A | Plug – European | 6159281200 | 1 |
B | Plug – US | 6159281210 | 1 |
Original instructions. © Copyright 2022, Ets Georges Renault 44818 St Herblain, FR All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
STATEMENT OF USE
This product is designed for installing and removing threaded fasteners in
wood, metal, and plastic. No other use permitted. For professional use only.
DATA
(See page 4). Noise level: < 70 dB(A) (EN 62841). Vibration level: < 2.5 m/s²
(EN 62841). SLB tools are ESD (ElectroStatic Discharge) certified
screwdrivers, according to the requirements of the IEC 61340-5-1 standard.
Declaration of noise and vibration emission All values are current as of the
date of this publication. For the latest information please visit
desouttertools.com. These declared values were obtained by laboratory-type
testing in accordance with the stated standards and are suitable for
comparison with the declared values of other tools tested in accordance with
the same standards. These declared values are not adequate for use in risk
assessments and values measured in individual workplaces may be higher. The
actual exposure values and risk of harm experienced by an individual user are
unique and depend upon the way the user works, the workpiece, and the
workstation design, as well as upon the exposure time and the physical
condition of the user. We, Desoutter, cannot be held liable for the
consequences of using the declared values, instead of values reflecting the
actual exposure, in an individual risk assessment in a workplace situation
over which we have no control. This tool may cause hand-arm vibration syndrome
if its use is not adequately managed. An EU guide to managing hand-arm
vibration can be found at
http://www.pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declarationinfo
sheet_0111.pdf We recommend a program of health surveillance to detect early
symptoms which may relate to noise or vibration exposure so that management
procedures can be modified to help prevent future impairment.
REQUIREMENTS
These tools need to be used with ESP1-LT controllers.
ELECTRICAL CONNECTION
(See page 6).
ACCESSORIES
A wide range of accessories is available and suitable items should be selected
from the relevant Desoutter Catalogue.
OPERATING INSTRUCTIONS
To tighten place the tool into the fixing and press the trigger (Fig. B-1) To remove a previously tightened fixing, push the button (Fig.B-2). To tighten it again, press the button (Fig.B-3).
MAINTENANCE INSTRUCTIONS
Regular inspection of the mains cable (D) must be carried out and if damaged
it must be replaced.
When disposing of components, lubricants, etc … ensure that the relevant safety procedures are carried out.
ASSEMBLY AND DISMANTLING
Failure to have repairs carried out by a suitably qualified electrician can result in danger to the user. When dismantling and assembling, follow normal engineering practices. Unsolder only those wires necessary for component removal. Always note the color code and location of wires for correct assembly. Refer to the illustration and build components into sub-assemblies. On assembly ensure the earth strap is properly secured to the gearbox/clutch assembly.
- The use of spare parts other than those originally supplied by the manufacturer may result in a drop in performance or in increased maintenance and level of vibration and in the full cancellation of the manufacturer’s liability.
- According to Directive 2012/19/
- EU concerning Waste Electrical and Electronic Equipment (WEEE), this product must be recycled.
- Contact your Desoutter representative or consult the website “www.desouttertools.com” to find out where you can recycle this product.
WARNING
This product can expose you to chemicals including lead, which is known to the
State of California to cause cancer and birth defects or other reproductive
harm. For more information go to www.P65Warnings. ca.gov
WARRANTY
-
Product warranty will expire 12 months after the product is first taken into use, but will in any case expire at the latest 13 months after delivery.
-
Normal wear and tear on parts is not included in the warranty.
-
Normal wear and tear are that which requires a part change or other adjustment/overhaul during standard tools maintenance typical for that period (expressed in time, operation hours or otherwise).
-
The product warranty relies on the correct use, maintenance, and repair of the tool and its component parts.
-
Damage to parts that occurs as a result of inadequate maintenance or performed by parties other than Desoutter or their Certified Service Partners during the warranty period is not covered by the warranty.
-
To avoid damage or destruction of tool parts, service the tool according to the recommended maintenance schedules and follow the correct instructions.
-
Warranty repairs are only performed in Desoutter workshops or by Certified Service Partners.
-
Desoutter offers extended warranty and state-of-the-art preventive maintenance through its Tool Care contracts. For further information contact your local Service representative.
For electrical motors: -
The warranty will only apply when the electric motor has not been opened.
References
- www.ca.gov | California State Portal
- Desoutter Industrial Tools - Industrial Pneumatic Tool for Aeronautics & Automotive
- P65Warnings.ca.gov
- Desoutter Industrial Tools - Industrial Pneumatic Tool for Aeronautics & Automotive
- P65Warnings.ca.gov
- Pneurop - Pneurop
- Technical Documentation for Industrial Tools - Desoutter Industrial Tools
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>