Desoutter 6158134150 TRACKER – EABS Industrial Tools User Manual

Desoutter 6158134150 TRACKER – EABS Industrial Tools

• Printed Matter No. 6159928470
• Issue No. 02
• Date 05/2021
• Page 1 / 8

Safety Information

Valid from Serial No. 49032100000 to 49992399999

Model Part number
TRACKER – EABS

Part number
6158134150

Download the latest version of this document at www.desouttertools.com/info/6159928470
WARNING

To reduce risk of injury, everyone using, installing, repairing, maintaining, changing accessories on, or working near this tool MUST read and understand these instructions before performing any such task.
DO NOT DISCARD – GIVE TO USER

Technical Data

• Power supply
  Powered by the tool (5 V)

• Power consumption
  2.5 W

• Weight
  0.02 kg
  0.044 lb

Storage and use conditions

• Storage temperature
  -20 to +70 °C (-4 to +158 F)

• Operating temperature
  0 to 45 °C (32 to 113 F)

• Storage humidity
  0-95 % RH (non-condensing)

• Operating humidity
  0-90 % RH (non-condensing)

• Altitude up to  Usable in Pollution degree 2
  environment
  2000 m (6562 feet)
  Indoor use only

Wireless Communication specifications

• Channel: 1
• Centre Frequency (MHz): 3494.4
• Frequency (MHz): * 3244.8 – 3744
• Bandwidth (MHz): * 499.2
• Max. value of peak power(dBm): < 0
• Authorized countries :** USA, Canada
• Channel: 2 (default)
• Centre Frequency (MHz): 3993.6
• Frequency (MHz): * 3774 – 4243.2
• Bandwidth (MHz): * 499.2
• Max. value of peak power (dBm): < 0
• Authorized countries :** Europe, USA, Canada
• Channel: 3
• Centre Frequency (MHz): 4492.8
• *Frequency (MHz) :** 4243.2 – 4742.4
• *Bandwidth (MHz) :** 499.2
• Max. value of peak power (dBm): < 0
• Authorized countries :** Europe, USA, Canada
• Channel: 4
• Centre Frequency (MHz): 3993.6
• *Frequency (MHz) :** 3228 – 4659.2
• *Bandwidth (MHz) :** 1331.2
• Max. value of peak power (dBm): < 0
• Authorized countries :** Europe, USA, Canada
• Channel: 5
• Centre Frequency (MHz): 6489.6
• *Frequency (MHz) :** 6240 – 6739.2
• *Bandwidth (MHz) :** 499.2
• Max. value of peak power (dBm): < 0
• Authorized countries :** Europe, USA, Canada
• Channel: 7
• Centre Frequency(MHz): 6489.6
• *Frequency (MHz) :** 5980.3 – 6998.9
• *Bandwidth (MHz) :** 1081.6
• Max. value of peak power (dBm): < 0
• Authorized countries :** Europe, USA, Canada

*: according to UWB IEEE802.15.4-2011
**: before using, note that the Tracker must be set to be compliant to local regulations. Some channel may be locally prohibited.
Contact your Desoutter representative for more information.

Declarations

EU DECLARATION OF CONFORMITY
We, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint Herblain, France, declare under our sole responsibility that the product (with name, type and serial number, see front page) is in conformity with the following Directive(s):
2011/65/EU, 2014/53/EU
Harmonized standards applied:
EN 62841-2-2:2014+C1:2016, EN 62479:2010, EN 302 065
V2.1.1, EN 301 489-33:2017 v2.2.0
Authorities can request relevant technical information from:
Pascal ROUSSY, R &D Manager, 38 rue Bobby Sands,
44818 Saint Herblain, France Saint-Herblain, 2020/06/02
Pascal ROUSSY, R&D Manager
Signature of issuer

Safety Information

WEEE
Information concerning Waste of Electrical and Electronic Equipment (WEEE):
This product and its information, meets the requirements of the WEEE Directive (2012/19/EU), and must be handled in compliance with the directive.
Products marked with a crossed-out wheeled bin symbol and a single black bar underneath, contain parts that must be handled in compliance with the WEEE Directive. The entire product, or the WEEE parts, can be sent to your “Customer Center” for handling.

FCC compliance Class A
This device complies with Part 15 of the FCC Rules. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this de-vice.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this de-vice must accept any interference received, including inter- ference that may cause undesired operation.

FCC Responsible party:
Name: Mark Johnson
Position: General Manager
Address: Chicago Pneumatic Tool Company
LLC 1815 Clubhouse Road Rock Hill
SC 29730
USA
Mobile: +1 800 624 4735
Email: [email protected]

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are de-signed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Any changes or modifications to this equipment not expressly approved by Desoutter may cause, harmful interference and void the FCC authorization to operate this equipment.

The device is only in compliance if no changes or modifica-tions is made to the device. The antenna is fixed to the device and no change in antenna or fixation of the antenna is accept-able and such modification is considered to violate the Compliance Statement.

This portable equipment with it’s antenna complies with FCC’s radiation exposure limits set forth for an uncontrolled environment.
To maintain compliance, follow the instructions below :

1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2.  Avoid direct contact to the antenna, or keep contact to a minimum while using this equipment.

IC compliance Class A
CAN ICS-3(A)/NMB-3(A)
(English) This device complies with Industry Canada’s li-cence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including inter-ference that may cause undesired operation of the device.

This equipment complies with RSS102’s radiation exposure limits set forth for an uncontrolled environment un-der the following conditions:
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This portable equipment with it’s antenna complies with RSS102’s radiation exposure limits set forth for an un-controlled environment.
To maintain compliance, follow the instructions below :

1.  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. Avoid direct contact to the antenna, or keep contact to a minimum while using this equipment.

Regional Requirements

WARNING
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
https://www.p65warnings.ca.gov/

Information Regarding Article 33 in REACH
The European Regulation (EU) No. 1907/2006 on Registra-tion, Evaluation, Authorization and restriction of Chemicals (REACH) defines among other things requirements related to communication in the supply chain. The information require-ment applies also to products containing so called Substances of Very High Concern (the “Candidate List”). On 27 June 2018 lead metal (CAS nr 7439-92-1) was added to the Candi-date List.

In accordance with the above this is to inform you that cer-tain electrical and mechanical components in the product may contain lead metal. This is in compliance with current substance restriction legislation and based on legit exemp-tions in the RoHS Directive (2011/65/EU). Lead metal will not leak or mutate from the product during normal use and the concentration of lead metal in the complete product is well below the applicable threshold limit. Please consider lo-cal requirements on the disposal of lead at product end of life.

Safety
DO NOT DISCARD – GIVE TO USER

WARNING Read all safety warnings, instructions, il-lustrations and specifications provided with this product.
Failure to follow all instructions listed below may result in electric shock, fire, property damage and/or serious injury.
Save all warnings and instructions for future refer-ence.
WARNING All locally legislated safety rules regard-ing installation, operation and maintenance shall be respected at all times.

Statement of Use

• For professional use only.
• This product and its accessories must not be modified in any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the product cease to be legible or become detached, replace with-out delay.
• The product must only be installed, operated and serviced by qualified personnel in an industrial environment.

Intended use
The tracker is designed for being installed on Desoutter EABS cordless nutrunners (see list below). No other use per-mitted. For professional use only.

Model  and Part number

• EABS8-1500-4S
  6151660870

• EABS8-1500-4Q
  6151660880

• EABS12-1100-4S
  6151660890

• EABS12-1100-10S
  6151660900

• EABS12-1100-4Q
  6151660910

• EABS17-800-4S
  6151660920

• EABS17-800-10S
  6151660930

• EABS17-800-4Q
  6151660940

• EABS24-500-10S
  6151660950

• EABS24-500-4Q
  6151660960

Trackers communicate with tracking bases installed in workstations via UWB (Ultra-Wide Band) technology

Model and Part number

• Tracking base
  6158133350

Product Specific Instructions

Minimum firmware and software releases
Product , Release

• EABS
  V 6.0.x

• CONNECT
  V 2.1.5.x

• CVI CONFIG
  V 2.3.4.

**Installing the tracker

**

Remove the battery pack before assembly.

WARNING Risk of Antistatic Discharge
There is a risk of antistatic discharge if you do not ground yourself.
► Wear an antistatic wrist strap.

1. Remove the cover plate.
   Retain it for later use if required

2. Put the tracker into place.
   Tighten by hand.

How to power on and enable the tracker
Plug a battery pack to the tool.

1. Indicator

The indicator blinks 10 seconds in green during the startup indicating that the power supply is correctly provided by the tool.
Go to CONNECT to enable the tracker.
NOTE:
Refer to the Product Instructions of the Tracking base (printed matter No. 6159925540) available at https://www.desouttertools.com/resource-centre.

The tracker will then communicate with the dedicated track-ing base via UWB.

The indicator blinks 5 seconds in red. Red blinking means no or corrupted firmware has been installed on the tracker.
Tracker firmware upgrade process is explained inside the following document:

Refer to the Product Instructions of the Tracking base (printed matter No. 6159925540) available at https://www.desouttertools.com/resource-centre.

• Tracking base model type:

LED color and  Description

• blue – steady The tracking base is disconnected or not visible from Tracker.

Safety instructions
Read the Safety Information referenced 6159925210 delivered with the tool or available at https://www.desouttertools.com/resource-centre.

Useful Information

Website
Information concerning our Products, Accessories, Spare Parts and Published Matters can be found on the Desoutter website.
Please visit: www.desouttertools.com.

Information about installation manuals
Detailed operating instructions, installation and upgrade manuals are available at https://www.desouttertools.com/resource-centre.

Information about spare parts
Exploded views and spare parts lists are available in Service Link at www.desouttertools.com.

Country of origin
France

Safety Data Sheets MSDS/SDS
The Safety Data Sheets describe the chemical products sold by Desoutter.
Please consult the Desoutter website for more information https://www.desouttertools.com/legal/sds.

Copyright
© Copyright 2020, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint Herblain, France
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings. Use only authorized parts. Any damage or mal-function caused by the use of unauthorized parts is not covered by Warranty or Product Liability.

Founded in 1914 and headquartered in France, Desoutter Industrial Tools is a global leader in electric and pneumatic assembly tools serving a wide range of assembly and manufacturing operations, including Aerospace, Automotive, Light and Heavy Vehicles, Off-Road, General Industry.

Desoutter offers a comprehensive range of Solutions -tools, service and projects- to meet the specific demands of local and global customers in over 170 countries.

The company designs, develops and delivers innovative quality industrial tool solutions, including Air and Electric Screwdrivers, Advanced Assembly Tools, Advanced Drilling Units, Air Motors and Torque Measurement Systems.
Find more on www.desouttertools.com

Ets Georges Renault
38 rue Bobby Sands 44818 Saint Herblain – FR
Phone:+33 (0)240 802 000 www.desouttertools.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>