AEYE AE100 Robotic Perception System for Autonomous Vehicles

AEYE AE100 Robotic Perception System for Autonomous Vehicles

Product List

Package Components

Instructions

How to Open

Charging

Power on/off, Sleeping mode, LED lights

• Power on : Press and hold the power button for 2 seconds to start the system
• Power off: Press and hold the power button for 2 seconds, the system will prompt whether to shut down the system, select confirm, the system will shut down
• Sleeping mode : In the power-on state, press the power button or fold the visual aid, the visual aid system automatically enters the screen sleeping mode
• LED lights : by toggling the LED lights switch, you can turn on and adjust the brightness of the LED light, with three brightness adjustments

Distance camera ‹not standard)

• Plug the USB-A end of the distance camera power cable into the adapter
• Plug the Type-C end of the distance camera cable into the distance camera port Turn on switch of the distance camera to use

Note: It is recommended to turn off the distance camera when the screen is on Sleeping mode to reduce the standby power consumption of the visual aid

Usage Scenarios

• Close up viewing camera mode: desktop reading/writing
• Close up viewing camera mode mainly for desktop book reading/writing with up to 20x magnification of text content

Distance camera mode: blackboard viewing

• Distance camera mode can be used for viewing blackboard information, with its powerful optical zoom unction allowing graphic information from up to 10 meters away to be displayed clearly on the screen.
• Steps to use: first of all, you can adjust to the best field of view by optical zoom, and then adjust the content of the image by digital

Distance camera mode: desktop reading/writing

Dual screen mode: blackboard viewing, desktop reading/writing

Specification

• Screen type: LCD Screen size: 10.1″ FHD
• Screen resolution: 1920”1200
• Battery capacity of the vision aid: 3.7V/6000mAh Battery life of the vision aid: 3 hours
• (The battery life varies greatly under different modes, so the data is for reference only)
• Charging time for the vision aid: 3.5 hours (switched oP) LED lights battery type: 18650 lithium ion battery
• LED lights battery capacity: 5200mAh LED lights battery life: weak (30 hours) medium (25 hours) strong (20 hours)
• ROM: Nand Flash 64GB
• close up viewing camera: 13.0 MP
• Distance camera (not standard): optical zoom WIFI: WIFI 802.11a/b/g/n-Ac
• Bluetooth: BT 4.2
• Earphone Port: 3.5mm standard earphone port Power adapter: Input: 110V-220V 50Hz/60Hz Output: DC 5.5V/3A
• Magnification: close up viewing camera mode: 1-20x

Safety Notification

Jadebird Vision makes no claims about the suitability of the Aeye-P4 for any particular event. Use of non-original equipment, accessories or software may cause unforeseen functional problems, resulting in damage to the product, whiCh may result in personal injury to you or others. The product uses lithium batteries, please do not disassemble the equipment, do not expose the batteries to hot, humid or corrosive environments. Do not expose products and accessories to rain, high humidity, dust or other airborne contaminants.

Do not expose the product and accessories to excessive temperatures (over 60°C) (e.g. hair dryers, microwave ovens or strong direct sunlight). Do not use this product in areas where radio equipment is prohibited, or request authorization for use from the relevant area manager. Turn off the power when you stop using the product. The product will generate some heat during normal operation, please give the product enough space to dissipate heat, if the product is too hot, please turn oP the machine and suspend it for a period of time before use.

Initial use of the product requires a certain amount of time (or training, so please take it step by step to improve your proficiency. If you feel tired or uncom(ortabIe, please take a break. Do not heat, open, puncture, damage or repair any battery, and do not allow liquid to come into contact with skin or eyes when a battery leaks; if contact occurs, flush the affected area with plenty of water and seek medical attention immediately.

Do not put the product in liquid or flush with liquid. Do not over-bend, knot or damage the data cable or charging cable. If you notice strange smells or sounds from products and accessories, please stop using them immediately and contact Jadebird Vision as soon as This product emits electromagnetic waves that may affect nearby electronic devices, including pacemakers, hearing aids, defibrillators. If you are using a pacemaker or other implanted medical device, please consult your doctor or device manufacturer before using this product.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 25mm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>