ROUGH COUNTRY 97084 Rear Roof Mount LED Light Kit Installation Guide

97084 Rear Roof Mount LED Light Kit

“`html

Product Specifications:

• Product Name: Can-Am 2018-22 Maverick Trail/Sport Rear Cube
  Light Mount

• Kit Contents:

  • 2 LED Light Kit
  • Driver Side Bracket x1
  • Pass Side Bracket x1

• Tools Needed: 4mm Allen Wrench, 10mm Wrench or Socket

Product Usage Instructions:

1. Installation Instructions:

2. Remove the rear outer bolt in the roof on the driver and
   passenger side of the UTV using a 4mm Allen wrench and a 10mm
   socket.

3. Retain the OE bolt and place it through the supplied bracket
   using the hole by the bend and the weld.

4. Place the bracket on the roof, secure, and tighten using the OE
   nut.

5. Attach the Cube Light to the bottom side of the bracket using
   the supplied hardware in the light kit.

6. Tighten the light to the desired position and wire the light
   harness to the UTV’s power supply.

7. Install the opposite side roof bracket and light.

8. Post Installation Instructions:

9. Check all fasteners for proper torque.

10. Verify clearance between exhaust and brake lines, fuel lines,
    fuel tank, floorboards, and wiring harness.

11. Check electrical wiring to ensure adequate clearance between
    components.

Frequently Asked Questions (FAQ):

1. What tools are needed for installation?
   – You will need a 4mm Allen wrench and a 10mm wrench or socket for
   installation.

2. How do I wire the light harness to the UTV’s power
   supply?
   – Connect the wires following the manufacturer’s instructions
   ensuring proper insulation and connection.

3. What should I check after installation?
   – Check all fasteners for proper torque and ensure adequate
   clearance between components as specified in the manual.

“`

921790800

Can-Am 2018-22 Maverick Trail/Sport Rear Cube Light Mount
Thank you for choosing Rough Country for all your vehicle needs. Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go. If question exist, please call us @1-800-222-7023. We will be happy to answer any questions concerning this product. Check all fasteners for proper torque. Check to ensure for adequate clearance between all components. Periodically check all hardware for tightness.

KIT CONTENTS: 2″ LED Light Kit x1 Driver Side Bracket x1 Pass Side Bracket x1

TOOLS NEEDED: 4mm Allen Wrench 10mm Wrench or Socket

Torque Specs:

Size 5/16″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″
3/4″

Grade 5 15 ft/lbs 30 ft/lbs 45 ft/lbs 65 ft/lbs 95 ft/lbs 135ft/lbs
185ft/lbs

Grade 8 20ft/lbs 35ft/lbs 60ft/lbs 90ft/lbs
130ft/lbs 175ft/lbs
280ft/lbs

Size 6MM 8MM 10MM 12MM 14MM 16MM
18MM

Class 8.8 5ft/lbs
18ft/lbs 32ft/lbs 55ft/lbs 85ft/lbs 130ft/lbs
170ft/lbs

Class 10.9 9ft/lbs
23ft/lbs 45ft/lbs 75ft/lbs 120ft/lbs 165ft/lbs
240ft/lbs

INSTALLATION INSTRUCTONS
1. Remove the rear outer bolt in the roof on the driver and Passengers side of the UTV using a 4mm Allen wrench and a 10mm socket. See Photos 1 and 2.

Photo 1

Photo 2

Remove the bolt.

Remove the nut.

2. Retain the OE bolt, Placing it through the supplied bracket using the hole by the bend and the weld. See Photo 3. 3. Place the bracket to the roof, Secure and tighten using the OE nut. See Photo 4.

Photo 3

Photo 4

Place the OE bolt into the bracket.

Install the bracket to the roof.

4. Place the Cube Light to the bottom side of the bracket using the supplied hardware in the light kit. See Photo 5.
5. Tighten the light to the desired position. Wire the light harness to the UTV’S power supply. See Photo 6. 6. Install the opposite side roof bracket and light.

Photo 5

Photo 6

Install the light to the bracket.

Set light angel and tighten.

POST INSTALLATION INSTRUCTIONS 1. Check all fasteners for proper torque. Check to ensure for adequate clearance between all rotating, mobile, fixed,
and heated members. Verify clearance between exhaust and brake lines, fuel lines, fuel tank, floorboards, and wiring harness. 2. Check electrical wiring to ensure adequate clearance between all rotating, mobile, fixed, and heated members.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>