Desoutter 6158133350 Virtual Cable Tracking Base Instruction Manual

Tracking base
Safety Information

Valid from Serial No. 49001900000 to 49992299999

Download the latest version of this document at
www.desouttertools.com/info/6159925550

| WARNING
---|---
To reduce the risk of injury, everyone using, installing, repairing, maintaining, changing accessories on, or working near this tool
MUST
read and understand these instructions before performing any such task.
DO NOT DISCARD – GIVE TO USER

Safety Information

Technical data
Power supply
PoE: 48 V
USB-C: 5 V

Power consumption
PoE
20 mA
LPS (Limited Power Source) on PoE power supply
Maximum PoE power supplied: 15.4 W
USB-C
180 mA

Storage and use conditions

Usable in Pollution degree 2
environment
IP54|
Indoor use only

Wireless Communication specifications
Frequency: 3.2 – 7.0 GHz power – 0.831 dBm
Declarations
EU DECLARATION OF CONFORMITY
We, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint Herblain, France, declare under our sole responsibility that the product (with name, type and serial number, see front
page) is in conformity with the following Directive(s): 2011/65/EU, 2014/53/EU
Harmonized standards applied: EN IEC 62368-1 :2014, EN 301 489-33:2017 V2.2.0, EN 302 065-2 V2.1.1
Authorities can request relevant technical information from Pascal ROSSY, R&D Manager, 38 rue Bobby Sands, 44818 Saint Herblain, France Saint-Herblain, 10/07/2019
Pascal ROUSSY, R&D Manager

Signature of issuer

WEEK
Information concerning Waste of Electrical and Electronic Equipment ( WEEE):
This product and its information meet the requirements of the WEEE Directive (2012/19/EU), and must be handled in compliance with the directive.
The product is marked with this symbol:

****Products with the symbol of a crossed-out wheelie bin with a single black line underneath indicate that parts within the product must be handled in compliance with the WEEE Directive. The entire product, or the WEEE parts, can be sent to your “Customer Centre” for handling.

FCC compliance Class A
This device complies with Part 15 of the FCC Rules. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this
device.
Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Responsible party
Name: Mark Johnson
Position: General Manager
Address: Chicago Pneumatic Tool Company
LLC 1815 Clubhouse Road Rock Hill
SC 29730
USA
Mobile: +1 800 624 4735
Email: [email protected]

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Any changes or modifications to this equipment not expressly approved by Desoutter may cause, harmful interference and void the FCC authorization to operate this equipment.

IC compliance Class A
CAN ICS-3(A)/NMB-3(A)
(English) This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions:  (1) This device may not cause interference;and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Information regarding Article 33 in REACH
The European Regulation (EU) No. 1907/2006 on Registration, Evaluation, Authorization, and restriction of Chemicals (REACH) defines among other things requirements elated o communication in the supply chain. The information the requirement applies also to products containing so-called Substances of Very High Concern (the “Candidate List”). On 27 June 2018 lead metal (CAS nr 7439-92-1) was added to the Candidate List. In accordance with the above, this is to inform you that certain electrical and mechanical components in the product may contain lead metal. This is in compliance with current substance restriction legislation and based on legit exemptions in the RoHS Directive (2011/65/EU). Lead metal will not leak or mutate from the product during normal use and the concentration of lead metal in the complete product is well below the applicable threshold limit. Please consider local requirements on the disposal of lead at product end of life.

Regional Requirements
WARNING
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
https://www.p65warnings.ca.gov/

Safety

DO NOT DISCARD – GIVE TO USER
WARNING Read all safety warnings, instructions, illustrations, and specifications provided with this product.
Failure to follow all instructions listed below may result in electric shock, fire, property damage, and/or serious injury.
Save all warnings and instructions for future reference.
WARNING All locally legislated safety rules regarding installation, operation and maintenance shall be respected at all times.

Statement of Use

• For professional use only.
• This product and its accessories must not be modified in any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the product cease to be legible or become detached, replace without delay.
• The product must only be installed, operated, and serviced by qualified personnel in an industrial environment.

Intended use
The tracking base has been designed for communicating with trackers mounted in tools via Ultra-Wide Band (UWB) on one side and to CONNECT on the other side. No other use is permitted.
This equipment is not suitable for use in locations where children are likely to be present.

Product Specific Instructions Description

1 USB-C
2 Ethernet/Ethernet PoE
3 Mounting screw access door
4 Power supply indicator
5 UWB indicator
6 Ethernet indicator

Power supply and communication Via USB-C

Connect-Y 6159327230 (to be ordered separately)
3| Computer (For service)

Plug a USB3.0 A to C cable (not supplied) into the tracking base and to any USB port of CONNECT.
Both power supply and communication are provided.
Via Connect PoE injector
The PoE injector is not supplied.

Connect-Y 6159327230 (to be ordered separately)

Plug an Ethernet cable to the PoE injector (in) and to the Ethernet port of the tracking base. Plug an Ethernet cable to the PoE injector (out) and to CONNECT.

Via external PoE injector
The PoE injector is not supplied.

CONNECT-Y 6159327230 (to be ordered separately)
3| PoE injector 6158133960 (to be ordered separately)

Plug an Ethernet cable to the PoE injector (in) and to the Ethernet port of the tracking base.
Plug an Ethernet cable to the PoE injector (out) and to CONNECT.
How to read indicators

the power supply is correctly
provided.This LED lights up in White and remains steady when the power supply is correctly
provided.This LED lights up in White and remains steady when the power supply is correctly
provided.
5 UWB indicator| This LED shows UWB communication status:
• Blue (Blinking): communication between Tracking base/Tracker  is not functional
• Green (Blinking): communication between Tracking base / Tracker is functional.
6 Ethernet/ USB indicator| This LED shows Ethernet / USB communication status between Tracking Base and CONNECT.
When Ethernet /USB communication has been established, this LED lights up in Blue and remains steady.

By default, the tracking base is defined as a COORDINATOR Tracking Bases. Indicator behavior depends on the Tracking Base type declaration.

• Refer to the Product Instructions of Tracking base (printed matter No. 6159925540) available at HTTPS://[www.desouttertools.com](http://www.desouttertools.com)/resource- centre.
• Tracking base model type:

Tracking base
model type| Tracking base serial number
index| Date of production
---|---|---
CE only| 4900xxxxxxx to
4903xxxxxxx
From index = 0 to
3| Before 2021
CE & FCC| 4904xxxxxxx and
later
From index = 4| After 2021

Electrical Safety
WARNING This apparatus must be earthed.
CAUTION Multiple power sources may be present. Disconnect ALL power sources before servicing.
CAUTION The socket outlet shall be easily accessible.
• Earthed equipment must be plugged into a socket that has been properly installed and earthed according to appropriate regulations. Never remove the earth pins or modify the plugin anyway. Do not use any adapter plugs. Check with a qualified electrician if you are in any doubt as to whether the outlet is properly earthed. Should the equipment suffer electronic malfunction or breakdown, the earth provides a low resistance path to carry electricity away from the user. Applicable only to Class I (earthed) equipment.

• Earthed equipment must be plugged into a socket that has been properly installed and earthed according to appropriate regulations. Never remove the earth pin or modify the plugin anyway. Do not use any adapter plugs. Check with a qualified electrician if you are in any doubt as to whether the outlet is properly earthed. Should the equipment suffer electronic malfunction or breakdown, the earth provides a low resistance path to carry electricity away from the user. Applicable only to Class I (earthed) equipment.

• Failure to comply with these operating instructions may impair the safety of this equipment.

• Only use the cord supplied with the controller to connect to the mains, and the cord supplied with the tool to connect to the controller. Do not modify the cords or use them for other purposes. Use only genuine replacement parts.

• Failure to follow these instructions may result in electric shock.

• Must not be used in explosive atmospheres.

• Avoid physical contact with grounded surfaces such as pipes, radiators, ovens, and refrigerator s. There is an increased risk of electric shock if your body is grounded.

• Do not expose the equipment to rain or wet conditions. Water entering the equipment will increase the risk of electric shock. This instruction does not apply to equipment classified as watertight or splashproof.

• For minimum electrical interference, locate the equipment as far as possible from sources of electrical noise, e.g. arc welding equipment, etc.

• Do not abuse the power lead. Never use the power lead to carry the equipment or to pull the plug from a socket. Keep the power lead away from heat, oil, sharp edges or
  moving parts. Replace damaged leads immediately. Damaged leads increase the risk of electric shock.

• When working simultaneously with welding equipment, the workpiece must be earthed separately while welding is in progress. This is to prevent the return current from passing through the controller earth cables, in case the return lines for the welding equipment have not been mounted correctly on the workpiece. Desoutter recommends
  that earthing be carried out with a conductor area at least as large as the return line for the welding equipment being used.

Signs and Stickers
The product is fitted with signs and stickers containing important information about personal safety and product maintenance. The signs and stickers shall always be easy to read. New signs and stickers can be ordered by using the spare parts list.

CAUTION
Multiple power sources may be present. Disconnect ALL power sources before servicing

| CAUTION
---|---
Multiple power sources may be present. Disconnect ALL power sources before servicing
ATTENTION
6158761770

Useful Information

Website
Information concerning our Products, Accessories, Spare Parts and Published Matters can be found on the Desoutter website.
Please visit www.desouttertools.com.
Information about installation manuals
Detailed operating instructions, installation, and upgrade manuals are available at https://www.desouttertools.com/
resource-center.
Information about spare parts
Exploded views and spare parts lists are available in Service Link at www.desouttertools.com.
Country of origin
France

Safety Data Sheets MSDS/SDS
The Safety Data Sheets describe the chemical products sold by Desoutter.
Please consult the Desoutter website for more information
https://www.desouttertools.com/legal/sds.
Copyright
© Copyright 2019, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint Herblain, France
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.

Original instructions

Founded in 1914 and headquartered in France, Desoutter Industrial Tools is a global leader in electric and pneumatic assembly tools serving a wide range of assembly and manufacturing operations, including Aerospace, Automotive, Light and Heavy Vehicles, Off-Road, General Industry.
Desoutter offers a comprehensive range of Solutions -tools, services,s, and projects- to meet the specific demands of local and global customers in over 170 countries.
The company designs develop and deliver innovative quality industrial tool solutions, including Air and Electric Screwdrivers, Advanced Assembly Tools, Advanced Drilling Units, Air Motors, and Torque Measurement Systems. Find more on www.desouttertools.com

More Than Productivity

More Than Productivity
Ets Georges Renault
38 rue Bobby Sands
44818 Saint Herblain – FR
Phone:+33 (0)240 802 000
www.desouttertools.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>