BEGA 31 072 Wall Luminaire Instruction Manual

BEGA 31 072 Wall Luminaire

Product Information

• The Wandleuchte Wall luminaire Applique is an unshielded wall luminaire with a high protection class. It is made of aluminium alloy and crystal glass, ensuring durability and aesthetic appeal.
• The luminaire is equipped with a 9.5W LED module, which has a connected wattage of 10.8W. It has a rated temperature of 25°C and is suitable for use in ambient temperatures up to 50°C.
• The LED module has a module designation of LED-1324/830 and a color temperature of 3000K. It has a color rendering index (CRI) greater than 80 and a luminous flux of 1835 lm. The luminaire itself has a luminous flux of 916 lm and a luminous efficiency of 84.8 lm/W.
• The installation and operation of this luminaire should only be carried out by a qualified electrician, in compliance with national safety regulations. The manufacturer does not accept liability for damage caused by improper use or installation.
• For additional protection against overvoltage and transients, it is recommended to use separate overvoltage protection components, which can be found on the manufacturer’s website.
• During installation or relamping, avoid touching the light output opening of the LED directly to prevent damage to the high-quality electronic components.
• Do not remove the desiccant bag from the luminaire housing, as it is necessary for removing residual moisture.

Product Usage Instructions

1. Ensure that the installation and commissioning of the luminaire are carried out by a qualified electrician, in accordance with national safety regulations.
2. If additional protection against overvoltage and transients is desired, consider using separate overvoltage protection components available on the manufacturer’s website.
3. Avoid touching the light output opening of the LED directly during installation or relamping to prevent damage to the electronic components.
4. Do not remove the desiccant bag from the luminaire housing, as it is necessary for removing residual moisture.

DIMENSION

Application

• Unshielded wall luminaire with high protection class.
• A luminaire made of aluminium alloy and crystal glass.

Product description

• Luminaire made of aluminium alloy, aluminium and stainless steel
• BEGA Unidure® coating technology
• Crystal glazing
• Silicone light diffuser
• Mounting plate with 2 fixing
• holes ø 4.4 mm · 60 x 95 mm spacing
• 2 cable entries for through-wiring of mains supply cable ø 7-12 mm
• Connecting terminal 2.5@ with plug connection
• Earth conductor connection
• LED power supply unit
• 220-240 V x 0/50-60 Hz
• BEGA Thermal Control®
• Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
• Safety class I
• Protection class IP 65
• Dust-tight and protection against water jets c  – Conformity mark
• Weight: 2.8 kg
• This product contains light sources of energy efficiency class(es) C

PRODUCT SPECIFICATION

• Lamp
  • Module connected wattage 9.5 W
  • Luminaire connected wattage 10.8 W
  • Rated temperature ta = 25 °C
  • Ambient temperature ta max = 50 °C
• 31 072 K3
  • Module designation LED -1324/830
  • Colour temperature 3000 K
  • Colour rendering index CRI > 80
  • Module luminous flux 1835 lm
  • Luminaire luminous flux 916 lm
  • Luminaire luminous efficiency 84,8 lm / W

Safety

• The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
• The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

• The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
• To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
• You can find them on our website at www.bega.com.

Installation

• LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
• Undo hexagon socket head screw (wrench size 3 mm) up to the stop and disassemble the mounting plate.
• Pass the power connecting cable through the cable entry in the mounting plate.
• Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
• Establish the earth conductor connection at the terminal of the mounting plate marked with 1. Make electrical connection at the loose plug-in terminals.
• Connect the green and yellow protective earth conductor from the luminaire top to the terminal marked 1 in the mounting plate.
• Place luminaire housing onto the mounting plate and fix it.
• Make sure that gasket is positioned correctly.

Cleaning · Maintenance

• Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
• Do not use high pressure cleaners.

Please note:

• Do not remove the desiccant bag from the luminaire housing.
• It is needed to remove residual moisture.

Replacing the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
• The module can be replaced by qualified persons using standard tools.
• Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
• Inspect and, if necessary, replace the luminaire gaskets.
• Defective glass must be replaced.
• Close the luminaire.

Spares

• LED power supply unit DEV-0451/350
• LED module 3000 K LED-1324/830
• Spare glass with frame graphite 75 005 350
• Spare glass with frame bronze 75 005 351
• Gasket base 83 001 926
• Gasket wall plate 83 002 074
• Gasket housing 2x 83 002 202

bout company

• BEGA Gantenbrink-Leuchten KG
• Postfach 31 60
• 58689 Menden
• info@bega.com
• www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>