BOSCH CMG778N.1 Oven User Manual

BOSCH CMG778N.1 Oven

Product Information

Specifications

• Model: CMG778N.1
• Type: Oven
• Language: English

Product Usage Instructions

Safety Precautions

It is important to follow these safety precautions while using the oven:

• Keep children under 8 years old away from the appliance and power cable.
• Avoid storing combustible objects in the cooking compartment to prevent fire hazards.
• Always use oven gloves when handling hot accessories or cookware.
• Be cautious of hot surfaces during and after use to prevent burns.
• Avoid touching hot parts of the appliance.
• Be careful when opening the appliance door to prevent steam burns.

Safe Use Guidelines

Follow these guidelines for safe use of the oven:

• Always place accessories in the cooking compartment correctly.
• Avoid using high alcohol content drinks in the cooking compartment to prevent fire risks.
• Allow hot telescopic shelves to cool down before touching them.
• Avoid pouring water into the cooking compartment when it is hot to prevent steam burns.
• Do not use harsh cleaners or sharp metal scrapers on the oven door glass to prevent damage.

Cleaning and Maintenance

Regularly clean and maintain the oven following these steps:

1. Allow the oven to cool down completely before cleaning.
2. Use mild cleaners and soft cloths to clean the exterior of the oven.
3. Remove and clean accessories and shelves separately according to the manual.
4. Inspect for any damages or issues and contact customer support if needed.

Frequently Asked Questions

• Q: How do I prevent my food from burning in the oven?
  • A: To prevent burning, ensure you follow recommended cooking times and temperatures, avoid overcrowding the oven, and use appropriate cookware.
• Q: Can I use aluminum foil in the oven?
  • A: Yes, you can use aluminum foil in the oven, but make sure it does not come into direct contact with heating elements to avoid fire hazards.
• Q: How often should I clean my oven?
  • A: It is recommended to clean your oven regularly, ideally after each use, to maintain hygiene and prevent buildup of residues that can affect cooking performance.

“`

Oven

CMG778N.1

[en]

User manual and installation instructions

enSafety
Further information and explanations are available online:

Safety

Observe the following safety instructions. 1.1General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the
product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2Intended use This appliance is designed only to be built into kitchen units. Read the special installation instructions. Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty. Only use this appliance: ¡ To prepare meals and drinks. ¡ For household use and similar applications, such as: In kitchens for employees in shops, offices and other commercial sectors; in agriculture; by customers in hotels and other residential facilities; in bed and breakfasts. ¡ up to an altitude of max. 4000 m above sea level. This appliance complies with the standards EN 55011 and CISPR 11. It is a group 2, class B product. Group 2 means that microwaves are produced for the purpose of heating food. Class B means that the appliance is suitable for private households. 1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inad-

equate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised. Keep children under the age of 8 years away from the appliance and power cable.
1.4Safe use Always place accessories in the cooking compartment the right way round. “Accessories”, Page 12
WARNING Risk of fire! Combustible objects that are left in the cooking compartment may catch fire. Never store combustible objects in the
cooking compartment. If smoke is emitted, the appliance must be
switched off or the plug must be pulled out and the door must be held closed in order to stifle any flames. Loose food remnants, fat and meat juices may catch fire. Before using the appliance, remove the worst of the food residues and remnants from the cooking compartment, heating elements and accessories. Opening the appliance door creates a draught. Greaseproof paper may come into contact with the heating element and catch fire. Never place greaseproof paper loosely over accessories when preheating the appliance and while cooking. Always cut greaseproof paper to size and use a plate or baking tin to hold it down.
WARNING Risk of burns! The appliance and its parts that can be touched become hot during use. Caution should be exercised here in order
to avoid touching heating elements. Young children under 8 years of age must
be kept away from the appliance. Accessories and cookware get very hot. Always use oven gloves to remove ac-
cessories or cookware from the cooking compartment.

Safetyen
When the cooking compartment is hot, any alcoholic vapours inside may catch fire. The appliance door may spring open. Hot steam and jets of flame may escape. Only use small quantities of drinks with a
high alcohol content in food. Do not heat spirits ( 15% vol.) when undi-
luted (e.g. for marinating or pouring over food). Open the appliance door carefully. The telescopic shelves become hot when the appliance is in use. Allow hot telescopic shelves to cool down before touching them. Only touch hot telescopic shelves with oven gloves.
WARNING Risk of scalding! The accessible parts of the appliance become hot during operation. Never touch these hot parts. Keep children at a safe distance. Hot steam may escape when you open the appliance door. Steam may not be visible, depending on the temperature. Open the appliance door carefully. Keep children at a safe distance. If there is water in the cooking compartment when it is hot, this may create hot steam. Never pour water into the cooking compart-
ment when the cooking compartment is hot.
WARNING Risk of injury! Scratched glass in the appliance door may develop into a crack. Do not use any harsh or abrasive cleaners
or sharp metal scrapers to clean the glass on the oven door, as they may scratch the surface. The appliance and its parts that can be touched may have sharp edges. Take care when handling and cleaning them. If possible, wear protective gloves. The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. Keep your hands away from the hinges. Components inside the appliance door may have sharp edges. Wear protective gloves.

3

enSafety
Alcoholic vapours may catch fire in the hot cooking compartment, and the appliance door may spring open and may fall off. The door panels may shatter and fragment. “Preventing material damage”, Page 7 Only use small quantities of drinks with a
high alcohol content in food. Do not heat spirits ( 15% vol.) when undi-
luted (e.g. for marinating or pouring over food). Open the appliance door carefully.
WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be
carried out by trained specialist staff. Only use genuine spare parts when repair-
ing the appliance. If the power cord of this appliance is dam-
aged, it must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. Never let the power cord come into contact with sharp points or edges. Never kink, crush or modify the power cord. An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners to clean the appliance. If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box. Call customer services. Page 36

WARNING Danger: Magnetism!
Caution: Magnetism
Caution for people with pacemakers Permanent magnets are used in the control panel. These may impair the functionality of electronic implants, e.g. pacemakers or insulin pumps. Persons with electronic implants must
stand at least 10 cm away from the control panel.
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from chil-
dren. Do not let children play with packaging ma-
terial. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts. 1.5Microwave CAREFULLY READ THE IMPORTANT SAFETY INSTRUCTIONS AND KEEP THEM SAFE FOR FUTURE USE
WARNING Risk of fire! Using the appliance for anything other than its intended purpose is dangerous and may cause damage. For example, heated slippers and pillows filled with grain or cereal may catch fire, even several hours later. Never dry food or clothing with the appli-
ance. Never heat up slippers, pillows filled with
grain or cereal, sponges, damp cleaning cloths or similar with the appliance. The appliance must only be used to prepare food and drink. Food and its packaging and containers may catch fire. Never heat food in heat-retaining packaging. Do not leave food unattended while it is heating in containers made of plastic, paper or other combustible materials.

4

Never set the microwave power too high or the cooking time too long. Follow the instructions provided in this user manual.
Never use the microwave to dry food. Never defrost or heat food with a low water
content, such as bread, at too high a microwave power or for too long. Cooking oil may catch fire. Never use the microwave to heat cooking oil on its own.
WARNING Risk of explosion! Liquids and other food may easily explode when in containers that have been tightly sealed. Never heat liquids or other food in contain-
ers that have been tightly sealed. WARNING Risk of burns!
Foods with peel or skin may burst or explode during heating, or even afterwards. Never cook eggs in their shell or heat hard-
boiled eggs in their shell. Never cook shellfish or crustaceans. Always prick the yolk of eggs before mi-
crowaving. The skin of foods that have a peel or skin,
such as apples, tomatoes, potatoes and sausages, may burst. Before heating, prick the peel or skin. Heat is not distributed evenly through baby food. Never heat baby food in closed containers. Always remove the lid or teat. Stir or shake well after heating. Check the temperature before giving the food or drink to a child. Heated food gives off heat. The cookware may become hot. Always use oven gloves to remove cookware or accessories from the cooking compartment. Airtight packaging may burst when food is heated. Always follow the instructions on the packaging. Always use oven gloves to remove the dishes from the cooking compartment. The accessible parts of the appliance become hot during operation. Never touch these hot parts. Keep children at a safe distance.

Safetyen
At the highest settings in microwave only mode, the drying function will automatically switch on an additional heating element to heat the cooking compartment. Never touch the inside surfaces of the
cooking compartment or the heating elements while they are hot. Keep children at a safe distance. Using the appliance for anything other than its intended purpose is dangerous. This is because, for instance, overheated slippers, pillows filled with grain or cereal, sponges and damp cleaning cloths, etc., may cause burns to the skin. Never dry food or clothing with the appliance. Never heat up slippers, pillows filled with grain or cereal, sponges, damp cleaning cloths or similar with the appliance. The appliance must only be used to prepare food and drink.
WARNING Risk of scalding! There is a possibility of delayed boiling when a liquid is heated. This means that the liquid reaches the boiling temperature without the usual steam bubbles rising to the surface. Exercise caution even when only gently shaking the container. The hot liquid may suddenly boil over and splatter. Always place a spoon in the container
when heating liquids. This prevents delayed boiling.
WARNING Risk of injury! Unsuitable cookware may crack. Porcelain or ceramic cookware can have small perforations in the handles and lid. These perforations conceal a cavity below. If moisture penetrates this cavity, it could cause the cookware to crack. Only use microwave-safe cookware.

5

enSafety
Cookware and containers made from metal or cookware with metal edging may lead to sparks being formed during simple microwave operation. The appliance is damaged. Never use metal containers during mi-
crowave-only operation. Only use microwave-safe cookware or use
the microwave in combination with a type of heating.
WARNING Risk of electric shock! The appliance uses a high voltage. Never remove the casing.
WARNING Risk of serious harm to health! Inadequate cleaning may destroy the surface of the appliance, reduce its service life, and lead to dangerous situations, such as escaping microwave energy. Clean the appliance on a regular basis,
and remove any food residue immediately. Always keep the cooking compartment,
door seal, door and door stop clean. “Cleaning and servicing”, Page 27 Never operate the appliance if the cooking compartment door or the door seal is damaged. Microwave energy may escape. Never use the appliance if the cooking compartment door, the door seal or the plastic door frame is damaged. Any repair work must only be carried out by the after-sales service. Microwave energy will escape from appliances that do not have any casing. Never remove the casing. Contact our after-sales service if maintenance or repair work is needed. 1.6Meat probe
WARNING Risk of electric shock! Using the wrong meat probe could damage the insulation. Only use the meat probe for this specific
appliance. WARNING Risk of injury!
The meat probe is sharp. Handle the meat probe with care.

1.7Cleaning function
WARNING Risk of fire! Loose food remnants, fat and meat juices may catch fire when the cleaning function is in progress. Before you start the cleaning function, al-
ways remove coarse dirt from the cooking compartment. Never clean accessories at the same time. The outside of the appliance gets very hot when the cleaning function is in progress. Never hang combustible objects, e.g. tea towels, on the door handle. Leave the front of the appliance clear. Keep children at a safe distance. If the door seal is damaged, a large amount of heat is generated around the door. Do not scrub or remove the seal. Never operate the appliance if the seal is damaged or missing.
WARNING Risk of serious harm to health! The appliance gets very hot when the cleaning function is in progress. The non-stick coating on baking trays and tins is destroyed and noxious gases are released. Never clean non-stick baking trays or bak-
ing tins using the cleaning function. Never clean accessories at the same time.
WARNING Risk of harm to health! The cleaning function heats up the cooking compartment to a very high temperature so that food left over from roasting, grilling and baking will burn off. This process releases vapours, which can irritate mucous membranes. Keep the kitchen well ventilated while the
cleaning function is running. Do not remain in the room for long periods. Keep children and pets away.
WARNING Risk of burns! The cooking compartment gets very hot when the cleaning function is in progress. Never open the appliance door. Allow the appliance to cool down. Keep children at a safe distance.
The outside of the appliance gets very hot when the cleaning function is in progress. Never touch the appliance door. Allow the appliance to cool down. Keep children at a safe distance.

6

Preventing material damage

2 Preventing material damage Preventingmaterialdamage
2.1General
ATTENTION! Alcoholic vapours may catch fire in the hot cooking compartment and cause permanent damage to the appliance. The appliance door may spring open due to an explosion and it may fall off. The door panels may shatter and fragment. Due to the resulting negative pressure, the cooking compartment may become considerably deformed inwards. Do not heat spirits ( 15% vol.) when undiluted (e.g.
for marinating or pouring over food). If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. Do not use the appliance if there is water on the
cooking compartment floor. Wipe away any water on the cooking compartment
floor before operation. Objects on the cooking compartment floor at over 50 °C will cause heat to build up. The baking and roasting times will no longer be correct and the enamel will be damaged. Do not place any accessories, greaseproof paper or
foil of any kind on the cooking compartment floor. Only place cookware on the cooking compartment
floor if a temperature under 50 °C has been set. Using silicone moulds or any film, covers or accessories that contain silicone could damage the baking sensor. Damage may occur even if the baking sensor is not active. Do not use silicone moulds or any film, covers or
accessories that contain silicone. Never place objects made of silicone in the cooking
compartment. When the cooking compartment is hot, any water inside it will create steam. The change in temperature may cause damage. Never pour water into the cooking compartment
when it is still hot. Never place cookware containing water on the
cooking compartment floor. The prolonged presence of moisture in the cooking compartment leads to corrosion. Allow the cooking compartment to dry after use. To
do this, open the cooking compartment door completely or use the drying function. Do not keep moist food in the cooking compartment for a long time with the door closed. Do not store food in the cooking compartment. Take care not to trap anything in the appliance door. Fruit juice dripping from the baking tray leaves stains that cannot be removed. When baking very juicy fruit flans, do not pack too much on the baking tray. If possible, use the deeper universal pan.

Using oven cleaner in a hot cooking compartment damages the enamel. Never use oven cleaner in the cooking compartment
when it is still warm. Remove all food remnants from the cooking com-
partment and the appliance door before you next heat up the appliance. If the seal is very dirty, the appliance door will no longer close properly during operation. This may damage the front of adjacent kitchen units. Keep the seal clean at all times. Never operate the appliance if the seal is damaged or missing. Sitting or placing objects on the appliance door may damage it. Do not place, hang or support objects on the appliance door. Do not place cookware or accessories on the appliance door. With certain models, accessories may scratch the door pane when closing the appliance door. Always push accessories fully into the cooking compartment. If aluminium foil comes into contact with the door pane, it could cause permanent discolouration. Do not allow aluminium foil in the cooking compartment to come into contact with the door pane.
2.2Microwave
Follow these instructions when using the microwave. ATTENTION! Metal touching the wall of the cooking compartment will cause sparks, which may damage the appliance or the inner door pane. Metal (e.g. a spoon in a glass) must be kept at least
2 cm from the cooking compartment walls and the inside of the door. Using accessories directly on top of one another causes sparks. Do not combine the wire rack with the universal pan. Always place accessories on different levels. The universal pan and baking tray are not suitable for use with microwave-only mode. Using either of these may create sparks, which will damage the cooking compartment. Place accessories on the wire rack supplied. Placing aluminium containers in the appliance may cause sparks, which will damage the appliance. Do not use aluminium containers in the appliance.

7

enEnvironmental protection and saving energy Operating the appliance without food in the cooking compartment may lead to overloading. Do not switch on the microwave unless there is food
inside. The only exception to this rule is when performing a short cookware test.

If you prepare microwave popcorn at a microwave power level that is too high, the door pane may crack due to overloading. Never set a microwave power level that is too high. Use a maximum microwave output of 600 watts. Always place the popcorn bag on a glass plate.

Environmental protection and saving energy

3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by type and dispose
of them separately.
3.2Saving energy
If you follow these instructions, your appliance will use less power. Only preheat the appliance if the recipe or the recommended settings tell you to do so. “How it works”, Page 37 ¡ Not preheating the appliance can reduce the en-
ergy used by up to 20%. Use dark-coloured, black-coated or enamelled baking tins. ¡ These types of baking tin absorb the heat particu-
larly well. Open the appliance door as little as possible during operation. ¡ This maintains the temperature in the cooking com-
partment and eliminates the need for the appliance to reheat. When baking multiple dishes, do so in succession or in parallel. ¡ The cooking compartment is heated after baking the first dish. This reduces the baking time for the second cake. If the cooking time is relatively long, you can switch the appliance off 10 minutes before the cooking time ends. ¡ There will be enough residual heat to finish cooking the dish. Remove any accessories that are not being used from the cooking compartment. ¡ Accessories that are not being used do not need to be heated. Allow frozen food to defrost before cooking. ¡ This saves the energy that would otherwise be required to defrost it. Switch off the display in the basic settings. “Basic settings”, Page 24 ¡ Energy is saved when the display is switched off.

Heat two glasses or cups of liquid at the same time. ¡ Heating several dishes at the same time requires
less energy than heating dishes one after the other. Note: The appliance requires: ¡ A maximum of 2 W in networked standby mode ¡ A maximum of 0.5 W in non-networked standby
mode with the display switched off

8

Familiarising yourself with your appliance

4 Familiarising yourself with your appliance Familiarisingyourselfwithyourappliance

4.1Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. On certain models, specific details such as colour and shape may differ from those pictured.
1

2

2

1

Display with setting ring You can use the digital setting ring to set the

appliance via the display.

You will see the current setting values, options

or relevant information.

“Display”, Page 9

2

Buttons You can use the buttons to directly set various

functions.

“Buttons”, Page 9

4.2Buttons
You can use the buttons to directly select various functions.

Button

Function Switch the appliance on or off. “Basic operation”, Page 14 Select the microwave operating mode directly. “Microwave”, Page 17 Open the “Operating modes” menu. “Operating modes”, Page 10 Start or pause operation. “Basic operation”, Page 14 Display for Home Connect. The field has no further function. When the symbol lights up, the appliance is connected. “Home Connect “, Page 25

Digital setting ring You can use the digital setting ring on the display to change the setting values. When you reach the minimum or maximum value available, this value remains on the display. If required, use the setting ring to turn the value back again.

Finely tuned setting values To fine-tune the setting values, e.g. to set a time to the precise minute, press and hold the corresponding area in the setting ring for around 1 – 2 seconds. The finely tined setting values are shown in dots.

Status indicator Status information is shown at the top of the display.

Symbol

Meaning Timer is activated. “Setting the timer”, Page 17 Childproof lock is activated. “Childproof lock”, Page 24 The appliance door is locked due to the cleaning function or childproof lock. “Pyrolytic self-cleaning cleaning function”, Page 29 “Basic settings”, Page 24 Wi-Fi signal strength for Home Connect. The more lines of the symbol are filled, the better the signal. If the symbol is struck through , there is no Wi-Fi signal. If there is an “x” at the symbol , there is no connection to the Home Connect server. “Home Connect “, Page 25 Remote start with Home Connect is activated. “Home Connect “, Page 25 Remote diagnostics with Home Connect for maintenance is activated. “Home Connect “, Page 25 Access to different functions.

Settings area The settings area is in the centre of the display. You can see current options and settings that have already been made in the settings area. You can see other setting options to the left and right of the settings area, outside of the setting ring. The menu and other setting options are arranged horizontally. Selection lists for functions are vertically arranged. Swipe over the display to scroll in the settings area. To select a function, press the function on the display. “Setting the operating mode”, Page 14

4.3Display
The display is divided into different areas.

9

enOperating modes

Possible symbols in the settings area

Symbol

Meaning Go back one setting.

Reset the setting value.

Note: A blue marking “new” or a blue dot on a function indicates that a new function, a new favourite or an update was downloaded to your appliance using the Home Connect app.

4.4Cooking compartment
Various functions in the cooking compartment provide support when operating your appliance.
Shelf supports The shelf supports in the cooking compartment enable you to place accessories at different heights. “Accessories”, Page 12 Your appliance has 3 shelf positions. The shelf positions are numbered from bottom to top. The shelf supports are equipped with pull-out rails on one or more levels, depending on the appliance type. You can remove the shelf supports, e.g. for cleaning. “Rails”, Page 33

Lighting One or more oven lights illuminate the cooking compartment. When you open the appliance door, the light in the cooking compartment switches on. If the appliance door remains open for longer than around 18 minutes, the light switches off again. For most operating modes, the lighting is switched on during operation. The lighting switches off again when the operation ends.
Cooling fan The cooling fan switches on and off depending on the appliance’s temperature. The hot air escapes above the door. ATTENTION! Covering the ventilation slots will cause the appliance to overheat. Do not cover the ventilation slots. To ensure that the appliance cools down more quickly after operation, the cooling fan continues to run for a certain period afterwards.
Appliance door If you open the appliance door during operation, the operation stops. If you close the appliance door, operation resumes automatically. In microwave mode, if you close the appliance door, you must continue the operation.

Operating modes

This is where you can find an overview of your appliance’s operating modes and main functions. Press to open the menu.

Operating mode Types of heating
Microwave
Favourites Dishes

Use
Select finely tuned types of heating for the optimal preparation of your food. “Types of heating”, Page 11 “Basic operation”, Page 14 Cook, heat or defrost more quickly with the microwave. “Microwave”, Page 17 Use your own saved settings. “Favourites”, Page 23 Use programmed, recommended settings for various types of food. “Dishes”, Page 22

10

Operating mode Cleaning
Basic settings

Use
Select the cleaning function for the cooking compartment. “Pyrolytic self- cleaning cleaning function”, Page 29 “Cleaning aid”, Page 30 “Drying”, Page 31 Adjust the basic settings. “Basic settings”, Page 24

Home Connect With Home Connect, you can connect and remotely control the oven with a mobile device, and use the full functionality of the appliance. Depending on the appliance type, additional or more comprehensive functions are available for your appliance with the Home Connect app. You can find more information about this in the app. “Home Connect “, Page 25

Operating modesen

5.1Types of heating
To ensure that you always find the right type of heating to cook your food, we explain the differences and applications below. The symbols for each type of heating help you to remember them.

When you select a type of heating, the appliance suggests a suitable temperature or setting. You can use these values or change them within the specified range. For temperature settings above 275 °C and grill setting 3, the appliance reduces the temperature to approx. 275 °C or grill setting 1 after approx. 40 minutes.

Symbol Type of heating 4D hot air

Temperature range 30 – 275 °C

Top/bottom heating 30 – 300 °C

Hot air gentle

125 – 250 °C

Air Fry

30 – 300 °C

Top/bottom heating 150 – 250 °C gentle

Circulated air grilling 30 – 300 °C

Full-surface grill Centre-area grill Pizza setting

Grill settings: 1 = low 2 = medium 3 = high Grill settings: 1 = low 2 = medium 3 = high 30 – 275 °C

Intensive heat Slow cooking

30 – 300 °C 70 – 120 °C

Defrost Drying out food Bottom heating
Keeping warm Plate warming

30 – 60 °C 30 – 130 °C 30 – 250 °C
50 – 100 °C 30 – 90 °C

What it’s used for and how it works
Bake or roast on one or more levels. The fan distributes the heat from the ring-shaped heating element in the back wall evenly around the cooking compartment. Traditionally bake or roast on one level. This type of heating is especially good for cakes with moist toppings. The heat is emitted evenly from above and below. Cook selected dishes gently on one level without preheating. The fan distributes the heat from the ring-shaped heating element in the back wall evenly around the cooking compartment. The food is cooked in phases using residual heat. Always keep the appliance door closed when cooking. This type of heating is used to determine the energy consumption in air recirculation mode and the energy efficiency class. Cook until crispy, on one level with little fat. Especially suitable for food that is usually fried in oil, e.g. chips. The fan circulates heat from the grill element around the food at high speed. The exhaust air is extracted more intensively from of the cooking compartment. Gently cook selected dishes. Heat is emitted from above and below. This type of heating is used to measure the energy consumption in the conventional mode. Roast poultry, whole fish or larger pieces of meat. The grill element and the fan switch on and off alternately. The fan circulates the hot air around the food. Grill flat items such as steak and sausages, or make toast. Gratinate food. The entire area below the grill element becomes hot.
Grill small quantities such as steak and sausages, or make toast. Gratinate small quantities of food. The central area below the grill element becomes hot.
Cook pizza or food that requires a lot of heat from below. The bottom heating element and the ring-shaped heating element in the back wall heat the cooking compartment. Prepare dishes with a crispy base. The heat is emitted from above and more intensively from below. Slowly and gently cook seared, tender pieces of meat in uncovered cookware. The heat is emitted evenly from above and below at a low temperature. Gently defrost frozen food. Dry herbs, fruit or vegetables. Final baking or cooking food in a bain marie. The heat is emitted from below. Keep cooked food warm. Preheat cookware.

11

enAccessories
5.2Temperature
With most types of heating, you can set the current temperature in the cooking compartment to approx. 30 °C in the display during heating and read the set temperature one above the other. When you are preheating the appliance, the optimal time to place the food in the cooking compartment is as soon as the displayed temperature in the cooking compartment and the set temperature are the same.

Note: Due to thermal inertia, the temperature that is displayed may differ slightly from the actual temperature inside the cooking compartment. Residual heat indicator When the appliance is switched off, a red line around the control ring indicates the residual heat in the cooking compartment. The further the temperature drops, the darker the ring. The ring goes out completely at approx. 60 °C.

5.3Microwave output settings
This is where you can find an overview of the different microwave output settings and recommendations on when to use them.

Microwave output in watts 90 W 180 W 360 W 600 W 900 W “Boost”

Maximum cooking time in hours 1:30 1:30 1:30 1:30 00:30

Use
Defrost delicate foods. Defrost food and continue cooking. Cook fish and meat. Heat up delicate foods. Heat and cook food. Heat liquids.

Notes ¡ To protect the appliance, the maximum microwave
output “Boost” is gradually reduced to 600 watts during the first few minutes. Maximum output is made available again after a cooling period.

¡ The microwave output settings do not correspond with the real power consumption of the appliance.

Accessories

Use original accessories. These have been made especially for your appliance. Note: Accessories may become deformed if they get hot. Deformation has no effect on function. As the accessory cools down, it will regain its original shape. Accessories Wire rack
Universal pan
Baking tray

The accessories supplied may differ depending on the appliance model.
Use ¡ Cake tins ¡ Ovenproof dishes ¡ Cookware ¡ Meat, e.g. roasting joints or steak ¡ Frozen meals ¡ Moist cakes ¡ Baked items ¡ Bread ¡ Large roasts ¡ Frozen meals ¡ Catch dripping liquids, e.g. fat when
grilling food on the wire rack. ¡ Tray bakes ¡ Small baked items

Meat thermometer

High-precision roasting or cooking. “Meat probe”, Page 19

12

6.1Information on accessories
Some accessories are only suitable for certain types of heating.
Microwave accessories The wire rack that is supplied is only suitable for operation solely using the microwave. Baking trays, e.g. the universal pan or the baking tray, may create sparks and are not suitable. Observe the information about the microwave. “Cookware and accessories with microwave”, Page 17

6.2Locking function
The locking function prevents the accessories from tilting when they are pulled out. You can pull out the accessories approximately halfway without them tipping. The accessories must be inserted into the cooking compartment correctly for the tilt protection to work properly.

6.3Sliding accessories into the cooking compartment
Always slide the accessory into the cooking compartment the right way round. This is the only way to ensure that accessories can be pulled out approximately halfway without tipping. 1. Turn the accessories so that the notch is at the
rear and is facing downwards. 2. Insert the accessory between the two guide rods for
a shelf position.

Wire rack

Insert the wire rack with the open side facing the appliance door and the curved lip facing downwards.

Before using for the first timeen

3. To place the accessory at shelf positions with pullout rails, pull out the pull-out rails.

Wire rack or baking tray

Place the accessory so that it is inserted on the rear stop of the pull-out system.

Note: Gently push the pull-out rails back into the cooking compartment. 4. Push the accessory all the way in, making sure that it does not touch the appliance door. Note: Take any accessories that you will not be using out of the cooking compartment while the appliance is in operation.
6.4Other accessories
You can purchase other accessories from our aftersales service, specialist retailers or online. You will find a comprehensive range of products for your appliance in our brochures and online: www.bosch-home.com Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance. You can find out which accessories are available for your appliance in our online shop or from our aftersales service.

Baking tray E.g. universal pan or baking tray

Slide the tray in with the sloping edge towards the appliance door.

Before using for the first time

Configure the settings for initial start-up. Clean the appliance and accessories.
13

enBasic operation
7.1Performing initial start-up
After connecting the appliance to the power supply, you must configure the settings for its initial start-up. It may take a few minutes for the settings to appear on the display. 1. Press to switch the appliance on. a The first setting appears. 2. To change the setting as required, press a value in
the list or change the value using the setting ring. Possible settings: ­ Language ­ Home Connect “Home Connect “, Page 25 ­ Time
“Setting the time”, Page 25 3. Press “Continue” and switch to the next setting. 4. Work through the settings and make changes as re-
quired. a After the last setting, a message appears on the dis-
play confirming that the initial start-up is complete. 5. To check the appliance before heating for the first
time, open and close the appliance door once.
7.2Cleaning the appliance before using it for the first time
Before using the appliance to cook food for the first time, you must clean the cooking compartment and accessories.

Basic operation

8.1Switching on the appliance
Press to switch the appliance on. a The display shows the menu.
8.2Switching off the appliance
Switch your appliance off when you are not using it. The appliance will switch itself off automatically if it is not used for a certain period of time. Press to switch the appliance off. a The appliance switches off. Any functions currently
in progress are cancelled. a The time or residual heat indicator appears on the
display.
8.3Starting the operation
You must start each operation. ATTENTION! If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. Do not use the appliance if there is water on the
cooking compartment floor. Wipe away any water on the cooking compartment
floor before operation. Press to start the operation. a The settings appear on the display.

1. Remove the product information and the accessories from the cooking compartment. Remove any leftover packaging, such as polystyrene pellets, and any adhesive tape that is in or on the appliance.
2. Wipe the smooth surfaces in the cooking compartment with a soft, damp cloth.
3. Press to switch the appliance on. 4. Apply the following settings:

Type of heating Temperature Cooking time

4D hot air Maximum 1 hour

“Basic operation”, Page 14 5. Start the operation.
Ventilate the kitchen while the appliance is heating.
a When the time has elapsed, a signal sounds. A message appears on the display confirming that the operation has finished.
6. Press to switch the appliance off. 7. Once the appliance has cooled down, clean the
smooth surfaces in the cooking compartment with a detergent solution and a dish cloth. 8. Clean the accessories thoroughly using a detergent solution and a dish cloth or soft brush.

8.4Interrupting the operation
You can interrupt the operation and then continue again. 1. To interrupt the operation, press . 2. Press again to resume the operation.
8.5Setting the operating mode
After you have switched on the appliance, the menu appears on the display. 1. To scroll through the various selection options,
swipe to the left or right on the display. Swipe right or left to scroll through the menu and
other setting options. Swipe down or up to scroll through selection
lists. 2. To select a function, press the function on the dis-
play. a Depending on the function, possible setting values
or other tiles are available for selection. 3. To go back to a setting if necessary, press . 4. To change the setting values, use the digital setting
ring: Swipe over the setting ring clockwise or anti-
clockwise, as required. Or press a specific position on the setting ring. 5. Press to start the operation. 6. If the operation is ended: If required, you can select other settings and re-
start the operation.

14

When the food is ready, use to switch the appliance off.
Note: You can save your settings as “Favourites” and use these again. “Favourites”, Page 23
8.6Setting the type of heating and the temperature
1. Press “Types of heating” in the menu. 2. Press the type of heating that you want to use. 3. Use the setting ring to set the temperature or level.
If required, you can implement additional settings: ­ “Rapid heating”, Page 15 ­ “Time-setting options”, Page 16 ­ “Microwave”, Page 17 ­ “Ventilation function ‘Crisp Finish'”, Page 19 ­ “Meat probe”, Page 19 4. Press to start the operation. a The appliance starts heating. a The setting values and how long the appliance has already been in operation are shown on the display. 5. If the operation is ended: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off. Note: The most suitable type of heating for your food can be found in the description of the type of heating. “Types of heating”, Page 11 Changing the type of heating When you change the type of heating, the other settings are also reset. 1. Press . 2. Press . 3. Press the type of heating that you want to use. 4. Reset the operation and use to start. Changing the temperature Once the operation has started, you can change the temperature at any time. 1. Press the temperature. 2. Change the temperature with the setting ring. a The change is applied.
8.7Displaying information
In most cases, you can call up information about the function that you have just started. The appliance automatically displays certain information, e.g. to ask you to do/confirm something or to issue a warning.
9 Rapid heating Rapidheating
To save time, rapid heating can shorten the preheating time for set temperatures over 100 °C. Rapid heating is possible for the following types of heating: ¡ 4D hot air ¡ Top/bottom heating ¡ Intensive heat

Rapid heatingen
1. Press “Info”. a Information is displayed for a few seconds. 2. To scroll through lots of content in the message,
swipe over the display. 3. If necessary, use to exit the message.
8.8Sabbath-compliant use
If you want to operate your appliance so that it is Sabbath-compliant, use the time-setting options and change the basic setting for the lighting. Note: If you open the appliance door during operation, the appliance stops heating. When you close the appliance door, the appliance continues to heat again. To operate your appliance so that it is Sabbath-compliant, do not open the appliance door until after operation. 1. Change the “Lighting” basic setting to “Always off”.
“Basic settings”, Page 24 This will ensure that the light in the cooking compartment is always off while the appliance is in operation and when you open the appliance door. 2. Set the required operating mode. “Setting the operating mode”, Page 14 “Setting the type of heating and the temperature”, Page 15 3. Set the required cooking time depending on the operating mode. “Setting the cooking time”, Page 16 “Time-setting options”, Page 16 4. Use “End time” to set the time at which the operation should end. “Setting the end time”, Page 16 “Time-setting options”, Page 16 5. Place the food in the cooking compartment before the appliance starts to heat. 6. Press to start the operation. a The display shows the time remaining until the operation starts. The appliance is in standby mode. a Once the start time has been reached, the appliance starts heating and the cooking time starts counting down. 7. When the operation has ended, remove the food from the cooking compartment. The appliance automatically switches off completely after approximately 15 to 20 minutes. Note: If necessary, change the basic setting for the lighting again.
9.1Setting rapid heating
To ensure an even cooking result, do not place the food in the cooking compartment until rapid heating has come to an end. Note: Do not set a cooking time until rapid heating has come to an end. 1. Set a suitable type of heating and a temperature of
at least 100 °C. 15

enTime-setting options Rapid heating automatically switches on at temperatures of 200 °C and above.
2. Press “Rapid heating”. a The symbol lights up red. 3. Press to start the operation. a Rapid heating starts.

10 Time-setting options Time-settingoptions

For an operation, you can set the cooking time and the time at which the operation should be finished. The timer runs independently of the operation.

Time-setting option Cooking time End time
Timer

Use
If you set a cooking time, the appliance stops heating automatically once this time has elapsed. Along with the cooking time, you can set the time at which you want the operation to end. The appliance starts up automatically so that the operation finishes at the required time. You can set the timer to run independently of the appliance during operation. It does not affect the appliance.

10.1Setting the cooking time
You can set the cooking time for the operation up to 24 hours. Requirement: An operating mode and temperature or level have been set. 1. Press “Cooking time”. 2. To set the cooking time, press the relevant time
value, e.g. hour display “h” or minute display “m”. a The selected value is marked in blue. 3. Use the setting ring to set the cooking time.
If required, use to reset the setting value. 4. Press to start the operation. a The appliance starts to heat and the time counts
down. a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the operation has finished. 5. Once the cooking time has elapsed: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off.
Changing the cooking time You can change the cooking time at any time. 1. Press the cooking time . 2. Use the setting ring to change the cooking time. a The change is applied.
Cancelling the cooking time You can cancel the cooking time at any time. 1. Press the cooking time .

16

a Once rapid heating has ended, a signal sounds. The symbol changes back to white.
4. Place the food in the cooking compartment. Cancelling rapid heating Press “Rapid heating”. a The symbol changes back to white.
2. Reset the cooking time using . Note: For operating modes that always require a cooking time, the appliance resets the cooking time to the preset value.
a The change is applied.
10.2Setting the end time
You can delay the time at which the cooking time for the operation is due to end by up to 24 hours. Notes ¡ To achieve good cooking results, do not delay the
time once the operation has already started. ¡ Food will spoil if you leave it in the cooking com-
partment for too long. Requirements ¡ An operating mode and temperature or level have
been set. ¡ A cooking time is set. 1. Press “End time”. 2. To set the time, press the hour display or the minute
display. a The selected value is marked in blue. 3. Use the setting ring to delay the time.
If required, use to reset the setting value. 4. Press to start the operation. a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode. a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts counting down. a When the time has elapsed, a signal sounds. A notification appears on the display confirming that the operation has finished. 5. Once the cooking time has elapsed: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off. Changing the end time To achieve good cooking results, only change the set time before the operation starts and before the cooking time starts counting down. 1. Press the end time . 2. Use the setting ring to change the end time. a The change is applied. Cancelling the end time You can delete the set end time at any time. 1. Press the end time . 2. Use to reset the end time.

Note: For operating modes that always require a cooking time, the appliance resets the time at which the cooking time ends to the next possible time. a The change is applied.
10.3Setting the timer
The timer runs independently during the operation. You can set the timer for up to 24 hours. The timer has its own signal so that you can tell whether it is the timer or a cooking time that has elapsed. 1. Press in the status display. 2. Press . 3. To set the timer, press the relevant time value on
the display, e.g. minute display “m” or second display “s”. a The selected value is marked in blue. 4. Set the timer using the setting ring. If required, use to reset the setting value. 5. To start the timer, press “Start” on the display. a The timer counts down.
11 Microwave Microwave
You can use the microwave to cook, heat up, bake or defrost food very quickly.
11.1Cookware and accessories with microwave
To heat food evenly and avoid damaging your appliance, it is important to only use the right cookware and accessories. Follow the cookware manufacturer’s instructions. Unless otherwise specified, place the cookware and accessory on level 1. Microwave-safe cookware Cookware made from heat-resistant, microwave- safe material: ¡ Glass ¡ Glass ceramic ¡ Porcelain ¡ Temperature-resistant plastic ¡ Fully glazed ceramic without cracks ¡ Serving dishes
Only use cookware with decorative gold or silver trim if the manufacturer guarantees its suitability for microwave use. ¡ Supplied wire rack In microwave-only operation, sheets and trays, e.g. the universal pan or the baking tray, may create sparks and are not suitable. These materials allow microwaves to pass through and are not damaged. Cookware that is not microwave-safe Note: Observe the specifications for preventing material damage. “Microwave”, Page 7 ¡ Metal cookware and bakeware

Microwaveen
a The timer remains visible on the display if the appliance is switched off.
a When the appliance is switched on, the display shows the settings for the current operation. The timer is displayed in the status display.
a Once the timer has elapsed, a signal sounds. A notification appears on the display confirming that the timer has finished.
Changing the timer You can change the timer at any time. 1. If the timer is running in the background, use to
select the timer beforehand. 2. Press . 3. Change the timer using the setting ring. 4. Press to confirm. Cancelling the timer You can cancel the timer at any time. 1. If the timer is running in the background, use to
select the timer beforehand. 2. Press . 3. Reset the timer using .Reset the timer using .
Microwaves cannot pass through metal. The food is barely heated or not heated at all. Metal may create sparks in microwave-only operation. Cookware when adding microwave to an operating mode If you switch on the microwave for another operating mode, metal is also an option, in addition to microwave-safe cookware and accessories: ¡ Metal cookware and bakeware
Metal must be kept at least 2 cm from the cooking compartment walls and the inside of the door. Always place metal cookware or bakeware in the centre of the supplied wire rack. ¡ Accessories supplied: Wire rack Universal pan Baking tray Testing cookware for microwave suitability If you are unsure whether your cookware is suitable for use in the microwave, carry out a cookware test. ATTENTION! Operating the appliance without food in the cooking compartment may lead to overloading. Do not switch on the microwave unless there is food inside. The only exception to this rule is when performing a short cookware test.

17

enMicrowave
WARNING Risk of burns! The accessible parts of the appliance become hot during operation. Never touch these hot parts. Keep children at a safe distance. 1. Place the empty cookware in the cooking compart-
ment. 2. Set the appliance to run for 30 seconds to 1 minute
at maximum power. 3. Start the operation. 4. Check the cookware several times:
If the cookware remains cold or warm to the touch, it is suitable for microwave use.
If the cookware becomes hot or sparks are created, stop the cookware test. The cookware is not microwave-safe.
11.2Setting options with the microwave
The microwave can be used on its own, or in combination with a different operating mode. Microwave-only operation The electromagnetic waves of the microwave alone generate energy and this is converted into heat in food, for example. To prevent condensation, when the microwave output is 600 watts and “Boost”, the appliance automatically switches on a heating element. The cooking compartment and the accessories become hot. The cooking result is not affected by this. You can switch off this automatic drying function in the basic settings. “Basic settings”, Page 24
WARNING Risk of burns! At the highest settings in microwave only mode, the drying function will automatically switch on an additional heating element to heat the cooking compartment. Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot. Keep children at a safe distance. Added microwave Adding the microwave to an operating mode reduces the cooking time. You can combine the microwave with the following functions: ¡ Types of heating Page 15
­ 4D hot air ­ Top/bottom heating ­ Circulated air grilling ­ Full-surface grill ­ Centre-area grill ¡ “Dishes”, Page 22 ¡ “Meat probe”, Page 19 ¡ “Ventilation function ‘Crisp Finish'”, Page 19 Possible microwave outputs combined with an operating mode include: ¡ 90 watts ¡ 180 watts ¡ 360 watts
18

11.3Setting the microwave
Note: Note the correct way to operate the microwave: ¡ “Safety”, Page 2 ¡ “Preventing material damage”, Page 7 ¡ “Microwave output settings”, Page 12 ¡ “Cookware and accessories with microwave”,
Page 17 1. Press “Microwave” in the menu.
Or select the microwave directly using the button.
2. Use the setting ring to set the microwave output. 3. Press “Cooking time”.
A cooking time must always be set to operate the microwave. 4. To change the preset cooking time, press the relevant time value, e.g. minute display “m” or second display “s”. a The selected value is marked in blue. 5. Use the setting ring to set the cooking time. If required, use to reset the setting value. 6. Press to start the operation. a The microwave starts and the cooking time counts down. The display shows the performance reduction for the maximum microwave output “Boost”. “Microwave output settings”, Page 12 a When the time has elapsed, a signal tone sounds. A notification appears on the display confirming that the operation has finished. 7. Once the cooking time has elapsed: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off. 8. If you have switched off the drying function for the
microwave in the basic settings and condensation has formed in the cooking compartment, dry the cooking compartment. “Drying”, Page 31 Note: If you open the appliance door during operation, the operation stops. If you close the appliance door, you must continue the operation. If you have changed the basic setting for this, make sure that the microwave does not resume operation without food inside. “Basic settings”, Page 24
Changing the cooking time You can change the cooking time at any time. 1. Press the cooking time . 2. Use the setting ring to change the cooking time. a The change is applied.
11.4Setting added microwave
Note: Note the correct way to operate the microwave: ¡ “Safety”, Page 2 ¡ “Preventing material damage”, Page 7 ¡ “Microwave output settings”, Page 12 ¡ “Cookware and accessories with microwave”,
Page 17 Requirement: Observe the information about the respective operating mode. “Setting options with the microwave”, Page 18

Ventilation function “Crisp Finish”en

1. Press the operating mode that you require in the menu.
2. Select the settings for the operating mode, e.g. type of heating and temperature.
3. Press “Added microwave”. 4. Use the setting ring to set the microwave output. 5. Press “Cooking time” and set the cooking time. 6. Press to start the operation. a The appliance starts to heat and the time counts
down. a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the operation has finished.

7. Once the cooking time has elapsed: If required, you can select other settings and restart the operation. When the food is ready, use to switch the appliance off.
Changing added microwave You can change or deactivate the added microwave at any time. 1. Press the microwave output . 2. Change or deactivate added microwave with the
setting ring. a The change is applied.

12 Ventilation function “Crisp Finish” Ventilationfunction”CrispFinish”

The ventilation function “Crisp Finish” extracts moisture from the cooking compartment so that your food will be more crispy. Hot steam that may escape when the appliance door is opened is reduced.
12.1Suitable types of heating with the ventilation function
Only certain types of heating are suitable for the ventilation function. You can use the ventilation function for the following types of heating: ¡ 4D hot air ¡ Top/bottom heating ¡ Circulated air grilling ¡ Pizza setting ¡ Intensive heat
12.2Setting the ventilation function
You can activate the ventilation function at any time, even after the start of the operation.

1. Set a suitable type of heating and a temperature. If required, you can select other settings and combine with the ventilation function.
2. Press “Crisp Finish”. 3. Press “On” in the setting ring. 4. Press to start the operation. a The appliance starts heating. a The setting values are shown on the display. 5. When the food is ready, use to switch the appli-
ance off. Note: Amplified fan noises can be heard while the appliance is in operation.
Cancelling the ventilation function You can switch off the ventilation function at any time. 1. Press “Crisp Finish”. 2. Press “Off” in the setting ring. a The operation continues without the ventilation func-
tion.

Meat probe Meatprobe

Cook with precision by inserting the meat probe into the food and setting a core temperature on the appliance. The meat probe measures the core temperature inside the food. Once the set core temperature has been reached in the food, the appliance automatically stops heating.
13.1Suitable types of heating with the meat probe
Only certain types of heating are suitable for use with the meat probe. You can use the meat probe with the following types of heating: ¡ 4D hot air ¡ Top/bottom heating ¡ Hot air gentle ¡ Top/bottom heating gentle ¡ Circulated air grilling ¡ Pizza setting

¡ Intensive heat ¡ Slow cooking ¡ Bottom heat ¡ Keeping warm
13.2Inserting the meat probe
Use the meat probe supplied or order a suitable meat probe from our customer service.
WARNING Risk of electric shock! Using the wrong meat probe could damage the insulation. Only use the meat probe for this specific appliance.

19

enMeat probe

ATTENTION! Otherwise the meat probe may be damaged. Do not trap the cable of the meat probe. Do not use cookware with a lid. To prevent the meat probe from being damaged by
excessive heat, there must be a gap of a few centimetres between the grill element and the meat probe. The meat may expand during the cooking process. If, during operation with the microwave, the tip of the meat probe is not fully inside the food, sparks will be created. Insert the meat probe fully into the food.
WARNING Risk of injury! The meat probe is sharp. Handle the meat probe with care. 1. Insert the meat probe into the food.
The meat probe has three measuring points. Ensure that at least the middle measuring point is inserted in the food.

Thin pieces of meat Thick pieces of meat

Insert the meat probe into the thickest part of the meat from the side. Insert the meat probe diagonally into the meat from above, pushing it in as far as possible.

Note: If you want to turn the food, insert the meat probe into the side of the food so that it does not need to be removed when turning.

Poultry

Insert the meat probe into the thickest part of the breast, pushing it in as far as possible. The meat probe can be inserted horizontally or vertically depending on the size and shape of the poultry.

Turn the poultry and place it on the wire rack breast-side down.

Fish

When cooking whole fish, insert the

meat probe behind the fish’s head in the

direction of the spine, pushing it in as

far as possible.

Place the fish on the wire rack in the swimming position without turning it, e.g. using half a potato as a support. 2. Place the food with the meat probe into the cooking compartment. 3. Plug the meat probe into the socket on the left-hand side of the cooking compartment. Note: Do not remove the meat probe when turning the food. Once you have turned the food, check that the meat probe is correctly positioned in the food.
13.3Setting the meat probe
You can set a core temperature of between 30 °C and 99 °C. Requirements ¡ The food with the meat probe is in the cooking com-
partment. ¡ The meat probe is inserted in the cooking compart-
ment. 1. Press “Types of heating” in the menu. 2. Press the type of heating that you want to use. 3. Use the setting ring to set the cooking compartment
temperature. Set the cooking compartment temperature at least 10 °C higher than the core temperature. Do not set the cooking compartment temperature to higher than 250 °C. 4. Press “Meat probe”. 5. Use the setting ring to set the core temperature. If required, use to reset the setting value. 6. Press to start the operation. a The appliance starts heating.

20

a The setting values and how long the appliance has

already been in operation are shown on the display.

If the appliance is connected to Home Connect, the

forecast remaining time is displayed.

a Once the food reaches the core temperature, a sig-

nal sounds. A message appears on the display con-

firming that the operation has finished. The appli-

ance stops heating. With the slow cooking type of

heating, the appliance continues to heat.

WARNING Risk of burns!

The cooking compartment, accessories and meat

probe become very hot.

Always use oven gloves to remove hot accessories and the meat probe from the cooking com-

partment.

When the core temperature is reached: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off. Pull the meat probe out of the socket in the
cooking compartment. Pull the meat probe out of the food and remove
it from the cooking compartment.

Tips ¡ You can also combine the meat probe with a
different operating mode, e.g.: ­ “Microwave”, Page 17 ­ “Dishes”, Page 22 ¡ You can use the meat probe even if no core temperature is set. You can read off the core temperature of the food on the display and manually end the operation, if required.

Changing the temperature You can change the cooking compartment temperature and the core temperature at any time after starting the operation. 1. Press the cooking compartment temperature or
core temperature. 2. Change the temperature with the setting ring. a The change is applied.

Changing the type of heating When you change the type of heating, the other settings are also reset. 1. Press . 2. Press . 3. Press the type of heating that you want to use. 4. Reset the operation and use to start.

13.4Remaining time forecast for the operation
If your appliance is connected to Home Connect, the appliance can forecast the expected remaining time for the cooking process. The initial remaining time appears on the display after approx. 1 minute. The remaining time is continually recalculated and updated.

Meat probeen

Note: The remaining time forecast is not available for all types of heating.

13.5Core temperatures of different foods
This is where you can find the suggested core temperatures for different foods. These suggestions depend on the quality and the size/ shape of the food. Do not use frozen food.

Poultry
Chicken Chicken breast Duck Duck breast, medium rare Turkey Turkey breast Goose

Core temperature in °C 80 – 85 75 – 80 80 – 85 55 – 60 80 – 85 80 – 85 80 – 90

Pork
Shoulder of pork Fillet of pork, medium rare Pork loin, well done

Core temperature in °C 85 – 90 62 – 70 72 – 80

Beef
Tenderloin or sirloin, rare Tenderloin or sirloin, medium rare Tenderloin or sirloin, well done

Core temperature in °C 45 – 52 55 – 62 65 – 75

Veal
Joint of veal or hock, lean Joint of veal, shoulder Veal knuckle

Core temperature in °C 75 – 80 75 – 80 85 – 90

Lamb
Leg of lamb, medium rare Leg of lamb, well done Saddle of lamb, medium rare
Fish
Fish, whole Fish fillet

Core temperature in °C 60 – 65 70 – 80 55 – 60
Core temperature in °C 65 – 70 60 – 65

Other
Meat loaf, all kinds of meat Heating food, reheating

Core temperature in °C 80 – 90 65 – 75

21

Dishes

14 Dishes Dishes
The “Dishes” operating mode helps you to use your appliance to prepare different meals by selecting the optimum settings automatically.
14.1Cookware for dishes
The cooking result depends on the composition of the meat and the size of cookware. You should therefore use heat-resistant cookware that is suitable for temperatures up to 300 °C. Glass or glass ceramic cookware is best. The joint should cover approx. 2/3 of the cookware base. Cookware made from the following material is not suitable: ¡ Bright, shiny aluminium ¡ Unglazed clay ¡ Plastic or plastic handles Note: For some dishes, the appliance switches on the microwave. A notification appears in the display stating that you should use cookware that is suitable for microwave use. “Cookware and accessories with microwave”, Page 17
14.2Setting options for the dishes
To cook the dishes perfectly, the appliance uses different settings depending on the dish. The display shows you the settings that are used. You can adjust certain settings. Follow the instructions on the display. Note: The cooking result depends on the quality and composition of the food. Use fresh and, ideally, chilled food. Use frozen food straight from the freezer.
Tips and information about the settings If you set a dish, the display shows relevant information for this dish, e.g.: ¡ Suitable shelf position ¡ Suitable accessory or cookware ¡ Added liquid ¡ Time for turning or stirring
When this time is reached, a signal sounds. To call up the information, press “Info”. Some messages are displayed automatically. Programmes The optimum type of heating, temperature and cooking time are preset for programmes. To achieve an optimal cooking result, you must also set the weight, thickness or the cooking level. You can set the weight only in the intended range. Unless otherwise indicated, set the total weight for your dish. Recommended settings For the recommended settings, the optimum type of heating is preset as a fixed value. You can adjust the preset temperature and the cooking time.

Baking sensor Some dishes are suitable for cooking with the baking sensor . You do not have to implement any further settings. The baking sensor monitors the baking process in the cooking compartment. The appliance regulates the settings automatically and ends the operation once the dish is ready. Notes ¡ Do not use the baking sensor if the dish is already
pre-baked. The baking result would no longer be satisfactory. ¡ Do not open the appliance door approx. 5 minutes after starting the operation with the baking sensor. The baking sensor mode stops. If you have to open the appliance door, restart the operation afterwards without the baking sensor or cancel the operation and set it manually. Monitor the cooking process until the food is ready. ¡ To achieve an optimal baking result, use dark-coloured metal baking tins.
ATTENTION! Using silicone moulds or any film, covers or accessories that contain silicone could damage the baking sensor. Damage may occur even if the baking sensor is not active. Do not use silicone moulds or any film, covers or
accessories that contain silicone. Never place objects made of silicone in the cooking
compartment.
Remaining time forecast for the operation If your appliance is connected to Home Connect, the appliance can forecast the expected remaining time for the cooking process. The initial remaining time appears on the display after approx. 1 minute. The remaining time is continually recalculated and updated. Note: The remaining time forecast is not available for all types of heating.

14.3Overview of the dishes
You can find out which individual dishes are available to you on the appliance when you call up the operating mode. The selection of dishes depends on the features of your appliance. The dishes are sorted by category and food. Note: In the basic settings, you can regionally specialise the displayed dishes. “Basic settings”, Page 24

Category Baking sensor

Food
Cakes Small baked items Bread, bread rolls Savoury cakes, pizza, quiche Note: This only contains dishes for cooking with the baking sensor.

22

Category Food

Cakes

Cakes in tins Cakes on a baking tray Small baked items Biscuits

Bread,

Bread

bread rolls Bread rolls

Pizza, sa- Pizza voury cakes Savoury cakes, quiche

Bakes, soufflés

Bake, savoury, fresh, cooked ingredients Potato gratin, raw ingredients, 4 cm deep Fresh lasagne Lasagne, chilled Bake, sweet, fresh Fruit crumble Soufflés in individual moulds Yorkshire pudding

Poultry

Chicken Duck, goose Turkey

Meat

Pork Beef Veal Lamb Game Meat dishes

Fish.

Fish, whole Fish fillet

Frozen products

Pizza Bakes Potato products Poultry, fish Bread rolls

Side dishes, Potatoes vegetables Rice
Cereals Vegetables

Defrosting food

Cakes Bread, bread rolls Meat, poultry Fish

15 Favourites Favourites
In the “Favourites”, you can save your settings and use these again. Note: Depending on the appliance type/software status, you must first download this function to your appliance. You can find more information in the Home Connect app.
15.1Saving favourites
You can save up to 30 different operating modes as your favourites. 1. If you set an operating mode, press next to the
title of the operating mode at the top of the display. 2. If required, change the title of the favourite using the
keyboard on the display.

Favouritesen

14.4Setting a dish
1. Press “Dishes” in the menu. 2. Press the required category. 3. Press the required food. 4. Press the required dish.
Tip: For some dishes, you can select a preferred cooking method. “Setting options for the dishes”, Page 22 a The settings for the dish appear on the display. 5. Adjust the settings if required. You can adjust only certain settings depending on the dish. “Setting options for the dishes”, Page 22 6. For information about the accessory and shelf position, for example, press “Info”. 7. Press to start the operation. a The appliance starts to heat and the time counts down. a No cooking time is displayed in baking sensor mode. The setting values and how long the appliance has already been in operation are shown on the display. If the appliance is connected to Home Connect, the forecast time remaining is displayed. “Remaining time forecast for the operation”, Page 22 a Once the dish is ready, a signal sounds. The appliance stops heating. 8. Once the cooking time has elapsed: If required, you can select other settings and re-
start the operation. When the food is ready, use to switch the ap-
pliance off.

14.5Automatic switch-off function

The automatic switch-off function

for the dishes

allows you to bake and fry without any stress.

When the operation has finished, the appliance auto-

matically stops heating.

To achieve an optimum cooking result, remove your

dish from the cooking compartment once the operation

has finished.

3. Press “Apply”.
15.2Selecting favourites
If you have saved favourites, you can use these to set the operation. 1. Press “Favourites” in the menu. 2. Press the required favourites. 3. If required, you can change the settings. 4. Press to start the operation. a The setting values are shown on the display. Note: Observe the instructions for the various operating modes: ¡ “Microwave”, Page 17
23

enChildproof lock
¡ “Ventilation function ‘Crisp Finish'”, Page 19 ¡ “Meat probe”, Page 19
15.3Changing favourites
You can change, sort or delete your saved favourites at any time. 1. Press “Favourites” in the menu. 2. Press the required favourites. 3. Next to the title of the favourite, press . 4. Change the settings or the title of the favourite.

16 Childproof lock Childprooflock
You can secure your appliance to prevent children from accidentally switching it on or changing the settings.
16.1Activating the childproof lock
The childproof lock can be activated regardless of whether the appliance is on or off. 1. To activate the childproof lock:
If the appliance is switched off, press any area on the display.
When the appliance is switched on, press on the status display.
2. Press . a A confirmation message appears on the display.

17 Basic settings Basicsettings
You can configure the basic settings for your appliance to meet your needs.

17.1Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features of your appliance. You can find more information about the individual basic settings on the display using “Info”.

Basic settings Selection

Language

See selection on the appliance.

Home Connect Connect the oven to a mobile device and remotely control it. “Home Connect “, Page 25

Time

Time in 24-hour format.

Display

Selection

Brightness

¡ Levels 1, 2, 3, 4 and 51

Standby screen

¡ On for a limited time ¡ On (this setting increases energy
consumption) ¡ Off1

1 Factory setting (may vary according to model)

24

5. Confirm the change. Sorting favourites 1. Press “Favourites” in the menu. 2. Press and hold the required favourite and drag it to
a different position. Deleting favourites 1. Press “Favourites” in the menu. 2. Press the required favourites. 3. Next to the title of the favourite, press . 4. Confirm the deletion.
a The control panel is locked. The appliance can only be switched off using .
a When the appliance is switched on, lights up. When the appliance is switched off, does not light up.
16.2Deactivating the childproof lock
You can deactivate the childproof lock at any time. 1. Press anywhere on the display. 2. To deactivate the childproof lock, follow the instruc-
tions on the display so that the graphic on the ring fills up completely. a A confirmation message appears on the display.

Display

Selection

Clock

¡ Digital1 ¡ Analogue

Alignment

¡ Align the display horizontally and vertically.

1 Factory setting (may vary according to model)

Tone

Selection

Button tone

¡ On1 ¡ Off

Volume

¡ Levels 1, 2, 31, 4 and 5

Signal tone

¡ Very short duration (once) ¡ Short duration (ap-
prox. 5 seconds) ¡ Medium duration
(approx. 10 seconds)1 ¡ Long duration (ap-
prox. 30 seconds)

1 Factory setting (may vary according to model)

Appliance set- Selection tings

Fan run-on time

¡ Minimum ¡ Recommended1 ¡ Long ¡ Very long

1 Factory setting (may vary according to model)

Appliance set- Selection tings

Lighting

¡ When cooking and when the door is opened1
¡ Only when the door is opened ¡ Always off

Microwave out- ¡ 90 W put presetting ¡ 180 W
¡ 360 W ¡ 600 W ¡ Boost1

Continue to microwave

¡ Off1 ¡ On

Dry microwave ¡ On1 ¡ Off

1 Factory setting (may vary according to model)

Personalisa- Selection tion

Brand logo

¡ Display1 ¡ Do not display

Operation after ¡ Main menu1

switch-on

¡ Types of heating

¡ Microwave

¡ Dishes

¡ Favourites

Elapsed cook- ¡ Do not display

ing time

¡ Display1

Microwave baking tray

¡ On1 ¡ Off

Regional dishes

¡ All1 ¡ European dishes ¡ British dishes

Dishes

¡ All1 ¡ No pork ¡ Kosher only

Childproof lock

¡ Door lock + keylock ¡ Button lock only1 ¡ Deactivated

Automatic

¡ off

rapid heating ¡ On1

1 Factory setting (may vary according to model)

18 Home Connect HomeConnect
This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status. The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home-connect.com.
The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings.

Home Connecten

Factory settings Factory settings
Info Appliance information

Selection ¡ Restore
Display Display technical information about the appliance.

17.2Changing the basic settings
1. Press “Basic settings” in the menu. 2. Press the required basic settings area. 3. Press the required basic setting. 4. Press to select the required basic setting. a The change is applied directly for most basic set-
tings. 5. To change additional basic settings, use to go
back and select a different basic setting. 6. To exit the basic settings, use to go back to the
main menu or switch off the appliance using . a The changes are saved. Note: Your changes to the basic settings will be retained even after a power failure.

17.3Setting the time
1. Press “Basic settings” in the menu. 2. Press “Time”. 3. To set the time, press the hour display or the minute
display. a The selected value is marked in blue. 4. Use the setting ring to set the time.
The minutes are counted in 5-minute increments. To set it to the precise minute, press and hold the corresponding area in the setting ring for around 1-2 seconds. The minutes are shown in dots. Use the setting ring to set the minutes.
5. To exit the basic settings, use to go back to the main menu or switch off the appliance using .
a The time is saved.

Tip: Please also follow the instructions in the Home Connect app. Notes ¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed when operating the appliance via the Home Connect app. “Safety”, Page 2 ¡ Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app. ¡ In networked standby mode, the appliance requires a maximum of 2 W.
25

enHome Connect
18.1Setting up the Home Connect app
1. Install the Home Connect app on your mobile device.
2. Start the Home Connect app and set up access for Home Connect. The Home Connect app guides you through the entire login process.
18.2Setting up Home Connect
Requirements ¡ The appliance is connected to the power supply and
is switched on. ¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smartphone. ¡ The Home Connect app has been installed on your mobile device. ¡ The appliance is receiving signals from the WLAN home network (Wi-Fi) at its installation location. ¡ The mobile device and the appliance are within range of your home network’s Wi-Fi signal.

1. Open the Home Connect app and scan the following QR code.
2. Follow the instructions in the Home Connect app.

18.3Home Connect settings
You can adjust the Home Connect settings and network settings in your appliance’s basic settings. Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance is connected to your home network.

Basic setting Home Connect assistant

Possible settings Start the assistant Disconnect

Wi-Fi

On

Off

Remote control status Monitoring Manual remote start Permanent remote start

Explanation You can connect your appliance to the Home Connect app via the Home Connect assistant. Note: If you are using the Home Connect assistant for the first time, only the “Start assistant” setting is available.
You can use the Wi-Fi to switch off the network connection for your appliance. When you have connected successfully once, you can deactivate the Wi-Fi and not lose your detailed data. As soon as you activate Wi-Fi again, the appliance connects automatically. Note: In networked standby mode, the appliance requires a maximum of 2 W.
During monitoring, you can only view the operating status of the appliance in the app. For manual remote start, you must activate the remote start each time before you can start the appliance via the app. You can open the appliance door within 15 minutes of having activated remote start. Remote start will not be deactivated by this. Once 15 minutes have elapsed, opening the appliance door will deactivate manual remote start. For permanent remote start, you can start and operate the appliance remotely at any time. If you often operate the appliance remotely, it is helpful to set the remote start to “Permanent”.

18.4Operating the appliance with the Home Connect app
You can use the Home Connect app to set and start the appliance remotely.

WARNING Risk of fire! Combustible objects that are left in the cooking compartment may catch fire. Never store combustible objects in the cooking
compartment. If smoke is emitted, the appliance must be switched
off or the plug must be pulled out and the door must be held closed in order to stifle any flames.

26

Requirements ¡ The appliance is switched on. ¡ The appliance is connected to the home network
and to the Home Connect app. ¡ In order to be able to set the appliance via the app,
the manual or permanent remote start must be selected in the “Remote control status” basic setting. 1. To activate remote start, press . 2. Configure a setting in the Home Connect app and send it to the appliance. Notes ¡ When you start the oven using the controls on
the appliance itself, the remote start function is activated automatically. You can use the Home Connect app to adjust the settings or start a new programme. ¡ You can open the appliance door within 15 minutes of having activated remote start. Remote start will not be deactivated by this. Once 15 minutes have elapsed, opening the appliance door will deactivate manual remote start.
18.5Software update
Your appliance’s software can be updated using the software update function, e.g. for the purposes of optimisation, troubleshooting or security updates. To do this, you must be a registered Home Connect user, have installed the app on your mobile device and be connected to the Home Connect server. As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are in your home network (Wi-Fi). The Home Connect app informs you once installation is successful. Notes ¡ The software update consists of two steps.
­ The first step is the download. ­ The second step is the installation on your appli-
ance.
19 Cleaning and servicing Cleaningandservicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
19.1Cleaning products
In order to avoid damaging the various oven surfaces on the appliance, do not use unsuitable cleaning products.
WARNING Risk of electric shock! An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners to
clean the appliance. ATTENTION! Unsuitable cleaning agents damage the surfaces of the appliance. Do not use harsh or abrasive cleaning products.

Cleaning and servicingen
¡ You can continue to use your appliance as normal while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically.
¡ Installation takes a few minutes. You cannot use your appliance during installation.
¡ We recommend that you install security updates as soon as possible.
18.6Remote diagnostics
Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance. Tip: For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com.
18.7Data protection
Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): ¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi communication module installed). ¡ Security certificate of the Wi-Fi communication module (to ensure a secure data connection). ¡ The current software and hardware version of your appliance. ¡ Status of any previous reset to factory settings. This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time. Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.
Do not use cleaning products with a high alcohol content.
Do not use hard scouring pads or cleaning sponges.
Do not use any special cleaners for cleaning the appliance while it is hot.
Using oven cleaner in a hot cooking compartment damages the enamel. Never use oven cleaner in the cooking compartment
when it is still warm. Remove all food remnants from the cooking com-
partment and the appliance door before you next heat up the appliance. If different cleaning agents are mixed together, there may be a chemical reaction between these. Do not mix cleaning agents. Completely remove any cleaning agent residue.

27

enCleaning and servicing

Salt contained in new sponge cloths may damage surfaces. Wash new sponge cloths thoroughly before use.

Suitable cleaning agents Only use cleaning agents that are suitable for the different surfaces on your appliance.

Follow the instructions on cleaning the appliance. “Cleaning the appliance”, Page 29

Appliance front

Surface Stainless steel
Plastic or painted surfaces E.g. control panel

Suitable cleaning agents Information

¡ Hot soapy water

To prevent corrosion, remove any patches of limescale, grease,

¡ Special stainless steel starch or albumin (e.g. egg white) from stainless steel surfaces im-

cleaning products

mediately.

suitable for hot sur- Apply a thin layer of the stainless steel cleaning product.

faces

¡ Hot soapy water

Do not use glass cleaner or a glass scraper. To avoid permanent stains, immediately remove any descaling agent that gets onto the surface.

Appliance door

Area Door panels
Door cover
Stainless steel interior door frame Door handle Door seal

Suitable cleaning agents Information

¡ Hot soapy water ¡ Oven cleaners

Do not use a glass scraper or stainless steel wool. Tip: Remove the door panels in order to clean them thoroughly. “Appliance door”, Page 31

¡ Made of stainless

Do not use glass cleaner or a glass scraper.

steel:

Do not use stainless steel care products.

¡

Stainless steel cleaner Made from plastic:

Tip: Remove the door cover for thorough cleaning. “Appliance door”, Page 31

Hot soapy water

¡ Stainless steel cleaner Discolouration can be removed using stainless steel cleaner. Do not use stainless steel care products.

¡ Hot soapy water

To avoid permanent stains, immediately remove any descaling agent that gets onto the surface.

¡ Hot soapy water

Do not remove or scrub.

Cooking compartment

Area Enamel surfaces
Shelf supports

Suitable cleaning agents Information

¡ Hot soapy water ¡ Vinegar water ¡ Oven cleaners

Soak any heavily soiled areas and use a brush or steel wool. Leave the appliance door open to dry the cooking compartment after cleaning it. Notes ¡ It is best to use the cleaning function.
“Pyrolytic self-cleaning cleaning function”, Page 29 ¡ Enamel burns at very high temperatures, causing minor discol-
ouration. The functionality of your appliance is not affected by this. ¡ The edges of thin trays cannot be completely enamelled and may be rough. This does not impair the corrosion protection. ¡ Food residues leave a white coating on the enamel surfaces. The coating does not pose a health risk. The functionality of your appliance is not affected by this. You can remove residues with lemon juice.

¡ Hot soapy water

Soak any heavily soiled areas and use a brush or steel wool.

Note: To clean thoroughly, detach the shelf supports. “Rails”, Page 33

28

“Pyrolytic self-cleaning” cleaning functionen

Area Pull-out system
Accessories Meat probe

Suitable cleaning agents Information

¡ Hot soapy water

Use a brush to remove heavy soiling. Clean the pull-out rails while they are pushed in so that you do not remove the lubricant. Do not clean in the dishwasher. Note: To clean thoroughly, detach the pull-out system. “Rails”, Page 33

¡ Hot soapy water ¡ Oven cleaners

Soak any heavily soiled areas and use a brush or steel wool. Enamelled accessories are dishwasher-safe.

¡ Hot soapy water

Use a brush to remove heavy soiling. Do not clean in the dishwasher.

19.2Cleaning the appliance
In order to avoid damaging the appliance, you must clean your appliance only as specified, and with suitable cleaning products.
WARNING Risk of burns! The appliance and its parts that can be touched become hot during use. Caution should be exercised here in order to avoid
touching heating elements. Young children under 8 years of age must be kept
away from the appliance.

WARNING Risk of fire! Loose food remnants, fat and meat juices may catch fire. Before using the appliance, remove the worst of the
food residues and remnants from the cooking compartment, heating elements and accessories.
Requirement: Read the information on cleaning products. “Cleaning products”, Page 27 1. Clean the appliance using hot soapy water and a
dish cloth. For some surfaces, you can use alternative
cleaning agents. “Suitable cleaning agents”, Page 28 2. Dry with a soft cloth.

20 “Pyrolytic self-cleaning” cleaning function “Pyrolyticself- cleaning”cleaningfunction

With the “Pyrolytic self-cleaning” cleaning function, the cooking compartment is cleaned virtually automatically. Use the cleaning function to clean the cooking compartment every two to three months. You can use the cleaning function more often, if required. The cleaning function requires approx. 3.1 – 4.0 kilowatt hours.
20.1Preparing the appliance for the cleaning function
To achieve a good cleaning result and prevent damage, prepare the appliance carefully.
WARNING Risk of fire! Combustible objects that are left in the cooking compartment may catch fire. Never store combustible objects in the cooking
compartment. If smoke is emitted, the appliance must be switched
off or the plug must be pulled out and the door must be held closed in order to stifle any flames. Loose food remnants, fat and meat juices may catch fire when the cleaning function is in progress. Before you start the cleaning function, always remove coarse dirt from the cooking compartment. Never clean accessories at the same time.

The outside of the appliance gets very hot when the cleaning function is in progress. Never hang combustible objects, e.g. tea towels, on
the door handle. Leave the front of the appliance clear. Keep children at a safe distance. If the door seal is damaged, a large amount of heat is generated around the door. Do not scrub or remove the seal. Never operate the appliance if the seal is damaged
or missing. 1. Remove accessories and cookware from the cook-
ing compartment. You can also clean the shelf supports along with the pull-out rails. 2. Remove coarse dirt from the cooking compartment and from the shelf supports. 3. Use a detergent solution and a soft cloth to clean the surfaces at the edges of the cooking compartment around the door seal. Do not remove or scrub the door seal. Use oven cleaner to remove stubborn dirt from the inner door pane. 4. Remove any objects from the cooking compartment. The cooking compartment must be empty except for the shelf supports.
20.2Setting the cleaning function
Ventilate the kitchen while the cleaning function is running.

29

enCleaning aid

WARNING Risk of harm to health! The cleaning function heats up the cooking compartment to a very high temperature so that food left over from roasting, grilling and baking will burn off. This process releases vapours, which can irritate mucous membranes. Keep the kitchen well ventilated while the cleaning
function is running. Do not remain in the room for long periods. Keep children and pets away.

WARNING Risk of burns! The cooking compartment gets very hot when the cleaning function is in progress. Never open the appliance door. Allow the appliance to cool down. Keep children at a safe distance.
The outside of the appliance gets very hot when the cleaning function is in progress. Never touch the appliance door. Allow the appliance to cool down. Keep children at a safe distance. Note: The oven light does not light up while the cleaning function is running.
Requirement: “Preparing the appliance for the cleaning function”, Page 29. 1. Press “Cleaning” in the menu. 2. Press “Pyrolytic self-cleaning”. 3. Use the setting ring to set the cleaning setting.

Cleaning setting 1 2

Cleaning level Low High

Duration in hours
Approx. 2:15 Approx. 2:30

The duration cannot be changed. You can delay the time at which the operation should be ready. “Setting the end time”, Page 16 4. Press . a A notification stating that you should carry out the necessary preparatory work for the cleaning function appears on the display.

21 Cleaning aid Cleaningaid
The cleaning aid is a quick alternative for occasionally cleaning the cooking compartment. The cleaning aid softens dirt by evaporating the soapy water. It is then easier to remove the dirt.
21.1Setting the cleaning aid
WARNING Risk of scalding! If there is water in the cooking compartment when it is hot, this may create hot steam. Never pour water into the cooking compartment
when the cooking compartment is hot. Note: The oven light does not come on while the cleaning aid is running. Requirement: The cooking compartment must have cooled down completely.
30

5. Confirm the message. a The cleaning function starts and the duration counts
down. a For your safety, the appliance door locks once a
certain temperature is reached in the cooking compartment. appears on the display. a A signal tone sounds when the cleaning function has finished. A message appears on the display confirming that the operation has finished. 6. Press to switch the appliance off. 7. “Preparing the appliance after the cleaning function”, Page 30. Cancelling the cleaning function You can no longer stop or change the cleaning function once it has started. To cancel the cleaning function, press to switch the appliance off.
20.3Preparing the appliance after the cleaning function
1. Allow the appliance to cool down. 2. Wipe off any ash that has been left behind in the
cooking compartment, on the shelf supports and around the appliance door with a damp cloth. 3. Slide the pull-out rails out and in several times. While the cleaning function is running, the rails may become discoloured. This discolouration does not compromise the functionality of the appliance. 4. Remove white residues with lemon juice. Note: White residues on the enamel surfaces may be caused by heavy soiling. These food residues are harmless. The deposits do not compromise the functionality of the appliance. Note: While the cleaning function is running, the frame on the inside of the appliance door or other parts of the door that are made of stainless steel become discoloured. This discolouration does not compromise the functionality of the appliance. The discolouration can be removed using a stainless steel cleaner.
1. Remove any accessories from the cooking compartment.
2. ATTENTION! Distilled water in the cooking compartment leads to corrosion. Do not use distilled water. Mix 0.4 litres water with a drop of washing-up liquid and pour into the centre of the cooking compartment floor.
3. Press “Cleaning” in the menu. 4. Press “Cleaning aid”.
The duration cannot be changed. 5. Press . a A notification stating that you should carry out the
necessary preparatory work for the cleaning aid appears on the display.

6. Confirm the message. a The cleaning aid starts and the duration counts
down. a Once the cleaning aid has ended, a signal tone
sounds. A message appears on the display confirming that the operation has finished. 7. Press to switch the appliance off. 8. “Cleaning the cooking compartment after using the cleaning aid”, Page 31.
21.2Cleaning the cooking compartment after using the cleaning aid
ATTENTION! The prolonged presence of moisture in the cooking compartment leads to corrosion. After using the cleaning assistance, wipe the cook-
ing compartment and allow it to dry completely.
22 Drying Drying
To prevent residual moisture, dry the cooking compartment following microwave- only operation and after using the cleaning aid. ATTENTION! If there is water on the cooking compartment floor when operating the appliance at temperatures above 120 °C, this will damage the enamel. Do not use the appliance if there is water on the
cooking compartment floor. Wipe away any water on the cooking compartment
floor before operation.
22.1Drying the cooking compartment
You can leave the cooking compartment to dry or use the drying function. 1. Allow the appliance to cool down. 2. Remove any dirt from the cooking compartment. 3. Wipe away any water in the cooking compartment. 4. Dry the cooking compartment.
To dry the cooking compartment, leave the appliance door open for 1 hour.
23 Appliance door Appliancedoor
To clean the appliance door thoroughly, you can disassemble the appliance door.
23.1Removing the door cover
The stainless steel inlay in the door cover may discolour. Remove the door cover in order to clean it and the stainless steel inlay, or to remove the door panes. 1. Open the appliance door slightly. 2. Press down on the left- and right-hand sides of the
door cover .

Dryingen 1. Allow the appliance to cool down. 2. Wipe out the remaining water in the cooking com-
partment using an absorbent sponge cloth. 3. Clean the smooth enamel surfaces in the cooking
compartment with a dish cloth or a soft brush. Remove stubborn food remnants using a stainless steel scouring pad. 4. Remove limescale with a cloth soaked in vinegar, and wipe this away with clean water. 5. Dry the cooking compartment with a soft cloth. 6. To dry the cooking compartment completely, leave the appliance door open for approx. 1 hour or use the drying function. “Setting the drying process”, Page 31
To use the drying function, set “Drying function”. “Setting the drying process”, Page 31
Setting the drying process Requirement: “Drying the cooking compartment”, Page 31 1. Press “Cleaning” in the menu. 2. Press “Drying function”.
The duration cannot be changed. 3. Press . a A notification stating that you should carry out the
necessary preparatory work for the drying appears on the display. 4. Confirm the message. a The drying process starts and the duration counts down. a Once the drying has ended, a signal tone sounds. A message appears on the display confirming that the operation has finished. 5. Press to switch the appliance off. 6. To dry the cooking compartment completely, leave the appliance door open for 1 to 2 minutes.
3. Remove the door cover and carefully close the appliance door.

31

enAppliance door
23.2Removing the door panes
WARNING Risk of injury! Scratched glass in the appliance door may develop into a crack. Do not use any harsh or abrasive cleaners or sharp
metal scrapers to clean the glass on the oven door, as they may scratch the surface. The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. Keep your hands away from the hinges. Components inside the appliance door may have sharp edges. Wear protective gloves. Requirement: The door cover has been removed. “Removing the door cover”, Page 31 1. Undo and remove the screws on the left and right of the appliance door. 2. Place a folded-up tea towel in the appliance door. 3. Close the appliance door. 4. Pull the front pane up and out .

WARNING Risk of serious harm to health!

If the screws are undone, the safety of the appliance

can no longer be guaranteed. Microwave energy

may escape.

Never undo the screws.

Never unscrew the four black screws on the frame.

23.3Fitting the door panes
WARNING Risk of injury! The hinges on the appliance door move when the door is opened and closed, which could trap your fingers. Keep your hands away from the hinges. Components inside the appliance door may have sharp edges. Wear protective gloves. 1. Turn the intermediate pane until the arrow is in
the top right.

5. Place the front pane down on a flat surface with the door handle facing down.
6. Press the intermediate pane against the appliance with one hand while pushing the left- and right-hand retainers upwards. Do not detach the retainers .

7. Remove the intermediate pane.

2. Insert the intermediate pane into the retainer at the bottom and push it in firmly at the top.
3. Push the left- and right-hand retainer downwards until the intermediate pane is clamped .

4. Attach the front pane downwards into the left- and right-hand retainers .
32

5. Push the front pane to the appliance until the leftand right-hand hook is opposite the support .

Railsen 8. Screw both screws back in on the left and right of
the appliance door. 9. Put the door cover in position and push down on it
until you hear it click into place.

6. Push the front pane in at the bottom until you hear it click into place.
7. Open the appliance door slightly and remove the tea towel.
24 Rails Rails
To thoroughly clean the rails and the cooking compartment, or to replace the rails, you can remove the rails.
24.1Detaching the rails
WARNING Risk of burns! The shelf supports get very hot Never touch the shelf supports when hot. Always allow the appliance to cool down. Keep children at a safe distance. 1. Lift the rail forwards and detach it . 2. Swivel the entire rail outwards and unhook it at
the rear .

10. Close the appliance door. Note: Do not use the cooking compartment again until the door panes have been correctly fitted.
Note: The retainers at the front differ from those at the rear.

1. Hook the front retainers with the hook into the round hole at the top and set them at a slight angle .
2. Hook the front retainers in at the bottom and straighten them .

24.2Fitting the retainers
The retainers may fall out when you detach the rails.

33

enTroubleshooting 3. Hook the rear retainers with the hook into the top
hole and push them into the bottom hole .

24.3Attaching the rails
1. Set the rear rail at an angle, hooking it into the retainers at the top and bottom .
2. Pull the rail forwards . 3. Hook in the rail at the front and press it down .

25 Troubleshooting Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING Risk of injury! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. If the appliance is defective, call Customer Service.
“Customer Service”, Page 36

WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. Only use genuine spare parts when repairing the
appliance. If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person in order to prevent any risk.

25.1Malfunctions

Fault The appliance is not working.
“Sprache Deutsch” appears in the display. The operation does not start or is interrupted. Appliance does not heat up.

Cause and troubleshooting
The circuit breaker in the fuse box has tripped. Check the circuit breaker in the fuse box. There has been a power cut. Check whether the lighting in your room or other appliances are working. Electronics fault 1. Disconnect the appliance from the power supply for at least 30 seconds by switching off
the fuse. 2. Reset the basic settings to the factory settings.
“Basic settings”, Page 24
There has been a power cut. Configure the initial configuration settings.
“Performing initial start-up”, Page 14
Different causes are possible. Check the notifications that appear on the display.
“Displaying information”, Page 15
Malfunction Call
“Customer Service”, Page 36.
Demo mode is switched on. 1. Briefly disconnect the appliance from the power supply by switching the circuit breaker in
the fuse box off and then on again. 2. Switch off demo mode in the basic settings within approx. 5 minutes.
“Changing the basic settings”, Page 25

34

Disposalen

Fault Appliance does not heat up. The time is not displayed when the appliance is switched off. Appliance door cannot be opened.
Home Connect is not working properly. During simple microwave operation, the cooking compartment becomes hot. The interior lighting does not work.
Maximum operating time reached.
Error code made up of letters and numbers appears on the display, e.g. E0111. The cooking result is not satisfactory.

Cause and troubleshooting There has been a power cut. Open and close the appliance door once after a power failure. a The appliance is checked and is ready to use.
Basic setting has been changed. Change the basic setting for the time display.
“Basic settings”, Page 24
The cleaning function locks the appliance door; lights up in the display. Allow the appliance to cool down until goes out in the display.
“Pyrolytic self-cleaning cleaning function”, Page 29 The childproof lock locks the appliance door. Deactivate the childproof lock using the setting ring.
“Childproof lock”, Page 24 You can switch off the lock in the basic settings. “Basic settings”, Page 24 Different causes are possible. Go to www.home- connect.com. The drying function is switched on. You can change the basic setting for the drying function during microwave operation. “Basic settings”, Page 24 Observe the information on operating with microwave.
“Microwave”, Page 17 Basic setting has been changed. Change the basic setting for the lighting.
“Basic settings”, Page 24 The LED light is defective. Call
“Customer Service”, Page 36. To prevent an unwanted permanent operation, the appliance automatically stops heating after several hours if the settings are unchanged. A message appears in the display. The point at which the maximum operating time is reached is determined by the corresponding settings for an operating mode. 1. To continue operation, switch the appliance off and on again using . Reset and start
the operation. 2. If you do not need to use the appliance, press to switch it off. Tip: To prevent the appliance from switching off when you do not want it to, set a cooking time. “Time-setting options”, Page 16 The electronics have detected a fault. 1. Switch the appliance off and on again. a If the fault was a one-off, the message disappears. 2. If the message appears again, call the after-sales service. Please specify the exact error
message when calling. “Customer Service”, Page 36 Settings were unsuitable. Adjustment values, e.g. temperature or cooking time, depend on the recipe, quantity and food. Next time, set lower or higher values. Tip: A lot of other information about the food preparation and corresponding adjustment values can be found in the Home Connect app or on our website www.bosch-home.com.

26 Disposal Disposal
26.1Disposing of old appliance
Valuable raw materials can be reused by recycling. 1. Unplug the appliance from the mains.

2. Cut through the power cord. 3. Dispose of the appliance in an environmentally
friendly manner.

35

enCustomer Service

Information about current disposal methods are available from your specialist dealer or local authority.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

27 Customer Service CustomerService
Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website. This product contains light sources from energy efficiency class G. These light sources are available as a spare part and should only be replaced by trained specialist staff.

27.1Product number (E-Nr.), production number (FD) and consecutive numbering (ZNr.)
You can find the product number (E-Nr.), the production number (FD) and the consecutive numbering (ZNr.) on the appliance’s rating plate. You will see the rating plate with these numbers if you open the appliance door.
Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly. You can also display the appliance information in the basic settings. “Basic settings”, Page 24

28 Information regarding Free and Open Source Software InformationregardingFreeandOpenSourceSoftware

This product includes software components that are licensed by the copyright holders as free or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home Connect app: “Profile -> Legal information -> Licence Information”.1 You can download the licence information on the brand product website. (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany.

The source code will be made available to you on request. Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Munich, Germany. Subject: ,,OSSREQUEST” The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance.

29 Declaration of Conformity DeclarationofConformity
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provisions of Directive 2014/53/EU.

A detailed RED Declaration of Conformity can be found online at www.bosch- home.com among the additional documents on the product page for your appliance.

1 Depending on the appliance specifications 36

How it worksen

Hereby, BSH Hausgeräte GmbH declares that the appliance with Home Connect functionality is in compliance with relevant statutory requirements.1 A detailed Declaration of Conformity can be found online at www.bosch-home.co.uk among the additional documents on the product page for your appliance.1

2.4 GHz band (2400­2483.5 MHz): Max. 100 mW 5 GHz band (5150­5350 MHz + 5470­5725 MHz): max. 200 mW

BE

BG

CZ

DK

DE

EE

FR

HR

IT

CY

LI

LV

MT

NL

AT

PL

PT

RO

SE

NO

CH

TR

IS

UK (NI)

5 GHz WLAN (Wi-Fi): For indoor use only.

IE

EL

ES

LT

LU

HU

SI

SK

FI

AL

BA

MD

ME

MK

RS

UK

UA

5 GHz WLAN (Wi-Fi): For indoor use only.

30 How it works Howitworks
Here, you can find the ideal settings for various types of food as well as the best accessories and cookware. We have perfectly tailored these recommendations to your appliance. Tip: A lot of other information about the food preparation and corresponding adjustment values can be found in the Home Connect app or on our website www.bosch-home.com.
30.1General cooking tips
Take note of the following information when cooking all types of food. ¡ The temperature and cooking time depend on the
amount of food and the recipe. Settings ranges are specified for this reason. Try using the lower values to start with. ¡ The setting values apply to food placed in the cooking compartment while the cooking compartment is still cold. If you want to preheat anyway, do not place accessories into the cooking compartment until it has finished preheating. ¡ Remove any accessories that are not being used from the cooking compartment. ATTENTION! Acidic food may damage the grid Do not place acidic food, such as fruit or food with an acidic marinade directly on the pan support. Information for those allergic to nickel In rare cases, small amounts of nickel may pass into the food. You can buy suitable accessories from customer service, from specialist retailers or online. “Other accessories”, Page 13 Tip For some food, you can use the ventilation function “Crisp Finish”.For some food, you can use the ventilation function . The ventilation function “Crisp Finish” extracts moisture from the cooking compartment with increased intensity. This method is recommended for food with lots of moisture, e. g. ¡ for cooking on several levels
1 Only applies to Great Britain

¡ for baked items with a moist toppings ¡ for meringue pastry ¡ when increased crispiness is required For crispier food, we recommend switching this on in the second half of the cooking time. “Ventilation function ‘Crisp Finish'”, Page 19
30.2Baking tips
¡ Dark-coloured metal baking tins are most suitable for baking cakes, bread and other baked goods.
¡ Use wide, shallow cookware for bakes and gratins. Food takes longer to cook in deep, narrow cookware and it browns more on top.
¡ Silicone moulds are not suitable. ¡ If you are cooking bakes directly in the universal
pan, place the universal pan into the cooking compartment at level 1. ¡ The setting values for bread dough apply to both dough placed on a baking tray and dough placed in a loaf tin. ¡ The recommended settings for baking in combination with the microwave mode are for metal baking tins. ATTENTION! When the cooking compartment is hot, any water inside it will create steam. The change in temperature may cause damage. Never pour water into the cooking compartment when it is still hot. Never place cookware containing water on the cooking compartment floor. Shelf positions You will obtain the best results if you use the following shelf positions. If you are baking on one level, use shelf position 1.
37

enHow it works

Baking on 2 levels Universal pan Baking tray Baking tins/dishes on two wire racks

Height 3 1 3 1

Use the 4D hot air heating function. Notes ¡ Items that are placed in the appliance on baking
trays or in baking tins/dishes at the same time will not necessarily be ready at the same time. ¡ If you opt for cooking in combination with the microwave mode, you can only cook on one level.
30.3Roasting, braising and grilling tips
¡ The recommended settings are for fridge-temperature food and unstuffed, oven-ready poultry.
¡ Place the poultry onto the cookware breast-side or skin-side down.
¡ Turn roasting joints, grilled items or whole fish after approx. ½ to of the specified time.
¡ The meat probe allows you to cook with absolute precision. Take note of the important information on using it correctly. Page 19
Roasting on the wire rack Food roasted on the wire rack will become very crispy on all sides. You can roast large poultry, for example, or multiple individual pieces at the same time. ¡ Roast pieces of a similar weight and thickness. The
grilled food will brown evenly and will remain succulent and juicy. ¡ Place the food to be roasted directly on the wire rack. ¡ To catch any liquids that drip down, place the universal pan into the cooking compartment one level below the wire rack. ¡ Add up to ½ litre of water to the universal pan, depending on the size and type of food that you want to roast. You can make a sauce from the juices that are collected. This also means that less smoke is produced and the cooking compartment does not become as dirty.
Roasting in cookware If you cover the cookware when you cook your food, this will keep the cooking compartment cleaner.
General information about roasting in cookware ¡ Use heat-resistant, ovenproof cookware. ¡ Place the cookware on the wire rack. ¡ Glass cookware is best. ¡ Follow the manufacturer’s instructions for your roast-
ing dishes. Roasting in uncovered cookware ¡ Use a deep roasting dish. ¡ If you do not have any suitable cookware, you can
use the universal pan. Roasting in covered cookware ¡ Use a suitable lid that seals well.

¡ When roasting meat, there should be at least 3 cm between the food and the lid. The meat may expand.
WARNING Risk of scalding! Very hot steam may escape when the lid is opened after cooking. Steam may not be visible, depending on the temperature. Lift the lid in such a way that the hot steam can es-
cape away from you. Keep children away from the appliance. Grilling Grill food if you want it to be crispy. The “Grill” type of heating is good for cooking thinner pieces of poultry, meat and fish such as steaks, drumsticks and burgers. It is also excellent for toasting bread. Circulated air grilling is very well suited to cooking whole poultry and fish, as well as meat, e.g. roast pork with crackling. ¡ When grilling several food items, choose pieces that
are of a similar weight and thickness. The grilled food will brown evenly and will remain succulent and juicy. ¡ Place the food to be grilled directly onto the wire rack. ¡ To catch any liquids that drip down, place the universal pan into the cooking compartment at least one level below the wire rack. Notes ¡ The grill element switches on and off continuously. This is normal. The grill setting that you use determines how frequently this occurs. ¡ Smoke may be produced when grilling.
30.4Microwave cooking
If you cook food using the microwave mode, you can reduce the cooking time considerably.
General information ¡ When using the microwave mode, the cooking time
is determined based on the total weight. If you want to cook a quantity that differs from the specified quantity, the general rule is Double the quantity requires just under double the cooking time. ¡ The food transfers heat to the cookware. The cookware may become very hot. ¡ The main part of the instruction manual contains information on how to configure the microwave and microwave boost oven settings. “Microwave”, Page 17 Tip You can find more microwave recipes here: ¡ “Defrosting”, Page 43 ¡ “Warming up food using the microwave mode”, Page 43 Cooking, braising or steaming using the microwave mode ¡ Use microwave-safe cookware with a lid. Alternatively, you can use a plate or special microwaveable film to cover the dish.

38

¡ For cereal products, e.g. rice, use deep cookware with a lid. Cereal products foam a lot during cooking. Add liquid in accordance with the instructions and information provided in the recommended settings tables.
¡ Do not wash or dry food. Add 1-3 tablespoons of water or lemon juice to the food.
¡ Spread the food out so that as much of it as possible is in contact with the bottom of the cookware. Food that is in contact with the bottom will cook more quickly than food that is piled up.
¡ Use salt and seasoning sparingly. When cooking food using the microwave mode, most of the food’s natural flavour will be retained.
¡ Turn or stir the food 2-3 times during cooking. ¡ After cooking, leave the food to rest for 2-3 minutes.

How it worksen
30.5Cooking instructions for ready meals
¡ The cooking result greatly depends on the quality of the food. Pre-browning and irregularities may already be present in the food before cooking.
¡ Do not use frozen products that are covered with a thick layer of ice. Remove any ice on the food.
¡ Take ready meals out of the packaging. ¡ If you are warming or cooking the ready meal in
cookware, make sure that the cookware is heat-resistant. ¡ Distribute foods that are in the form of separate pieces, such as bread rolls and potato products, so that they are spread out flat and evenly on the accessory. Leave a little space between the individual pieces. ¡ Follow the manufacturer’s instructions on the packaging. ¡ To achieve best results, we recommend that you reheat food or ready meals at 600 watts. If the packaging specifies a higher microwave output setting, extend the time.

30.6List of foods
Recommended settings for a variety of foods, sorted into food categories.

Recommended settings for various types of food

Food

Accessories/cook- Shelf pos- Type of

ware

ition

heating

Fruit tart or cheesecake with shortcrust pastry base

Springform cake 1 tin, diameter 26 cm

Fruit tart or cheesecake with shortcrust pastry base

Springform cake 1 tin, diameter 26 cm

Sponge flan, 6 eggs

Springform cake tin 1 Ø 28 cm

Sponge flan, 6 eggs

Springform cake tin 1 Ø 28 cm

Shortcrust tart with moist Universal pan

1

topping

Yeast cake with moist Universal pan

1

topping

Swiss roll

Baking tray

1

Muffins

Muffin tray

1

Small yeast cakes

Baking tray

1

Biscuits

Baking tray

2

Biscuits, 2 levels

Universal pan

3+1

Baking tray

Bread, 750 g

Universal pan

1

or

Loaf tin

1 Preheat the appliance. 2 Turn the dish 2/3 of the way through the cooking time.

Temperature in °C/grill setting 160-170

Microwave Cooking

power setting time in

in W

mins

–

65-85

1. 160-180 2. 100
150-170 1
150-160
160-180
180-190
180-190 1 170-190 160-170 140-160 130-150

1. 180 2. –
–
–
–
–
–

1. 30-40 2. 20
30-50
50-60
60-80
30-45
10-20 15-30 30-40 15-30 20-35

1. 210-220

–

2. 180-190 1

1. 10-15 2. 25-35

39

enHow it works

Food

Accessories/cook- Shelf pos- Type of

ware

ition

heating

Bread, 1500 g

Universal pan

1

or

Loaf tin

Bread, 1500 g

Universal pan

1

or

Loaf tin

Flatbread

Universal pan

1

Bread rolls, fresh

Baking tray

1

Pizza, fresh

Baking tray

1

Pizza, fresh, 2 levels

Universal pan

3+1

Baking tray

Pizza, fresh, thin-crust, on Pizza tray

1

a pizza tray

Quiche

Dark coated

1

quiche tin

Tarte flambée

Universal pan

1

Bake, savoury, cooked Ovenproof dish

1

ingredients

Bake, savoury, cooked Ovenproof dish

1

ingredients

Lasagne, frozen,

Uncovered cook- 1

350-450 g, 3 cm deep ware

Lasagne, frozen, 600-1000 g, 4-5 cm deep

Uncovered cook- 1 ware

Potato gratin, raw in-

Ovenproof dish

1

gredients, 4 cm deep

Potato gratin, raw in-

Ovenproof dish

1

gredients, 4 cm deep

Chicken, 1.3 kg, un-

Pan support

1

stuffed

Chicken, 1.3 kg, unstuffed

Covered cookware 1

Small chicken portions, Pan support

2

250 g each

Small chicken portions, Uncovered cook- 1

250 g each

ware

Goose, unstuffed, 3 kg Uncovered cook- 1 ware

Joint of pork without rind, Uncovered cook- 1

e.g. neck, 1.5 kg

ware

Joint of pork without rind, Covered cookware 1 e.g. neck, 1.5 kg

Joint of pork without rind, Uncovered cook- 1

e.g. neck, 1.5 kg

ware

Fillet of beef, medium, 1 kg

Uncovered cook- 1 ware

Pot-roasted beef, 1.5 kg Covered cookware 1

Pot-roasted beef, 1.5 kg Covered cookware 1

Sirloin, medium, 1.5 kg Uncovered cook- 1 ware

1 Preheat the appliance. 2 Turn the dish 2/3 of the way through the cooking time.

Temperature in °C/grill setting 1. 210-220 2. 180-190 1

Microwave Cooking

power setting time in

in W

mins

–

1. 10-15

2. 40-50

200-210

–

35-45

250-270

–

180-190

–

200-220

–

180-190

–

20-30 25-35 20-30 35-45

210-230

–

200-210

–

280-300 1

–

200-220

–

140-160

360

200-210

180

200-210

180

20-30 35-50 8-18 35-55 20-30 20-25 35-45

170-180

–

170-190

360

200-220

–

230-250

360

220-230

–

190-210

360

160-170

–

180-200

–

180-200

180

180-190

–

210-220

–

200-220

–

200-220

–

220-230

–

50-65 20-25 60-70 25-35 30-35 20-30 120-150 120-130 55-65 120-140 40-50 130-140 140-160 60-70

40

How it worksen

Food

Accessories/cook- Shelf pos- Type of

ware

ition

heating

Sirloin, medium, 1.5 kg Uncovered cook- 1 ware

Burger, 3­4 cm thick

Pan support

2

Leg of lamb, boned, me- Uncovered cook- 1

dium, 1.5 kg

ware

Leg of lamb, boned, me- Covered cookware 1 dium, 1.5 kg

Meat loaf, 1 kg + 50 ml Uncovered cook- 1

water

ware

Fish, grilled, whole, 300 g, e.g. trout

Uncovered cook- 1 ware

Fish, grilled, whole,

Pan support

1

300 g, e.g. trout

Baked potatoes, halved, Universal pan

2

1 kg

1 Preheat the appliance. 2 Turn the dish 2/3 of the way through the cooking time.

Temperature in °C/grill setting 240-260

Microwave Cooking

power setting time in

in W

mins

180

30-40

3

–

170-190

–

20-30 2 50-70

240-260 170-190

1. 360 2. 180 360

1. 30 2. 35-40 30-40

170-190

–

20-30

2

90

15-20

200-220

360

15-20

Desserts
Making yoghurt 1. Remove the accessories and shelves from the
cooking compartment. 2. Heat 1 litre of whole milk (3.5% fat) to 90 °C on the
hob and then leave it to cool down to 40 °C. It is sufficient to heat UHT milk to 40 °C. 3. Mix 150 g of chilled yoghurt into the milk. 4. Pour the mixture into small containers, e.g. cups or small jars. 5. Cover the containers with film, e.g. cling film. 6. Place the containers on the cooking compartment floor. 7. Use the recommended settings when configuring the appliance settings. 8. After making the yoghurt, leave it to cool in the refrigerator for at least 12 hours.
Making blancmange from blancmange powder 1. Use a deep, microwave-safe receptacle. 2. Pour the blancmange powder and all of the milk
and sugar into the receptacle and mix. 3. Place the receptacle onto the wire rack and slide
the rack into the cooking compartment. 4. Use the recommended settings when configuring
the appliance settings.

5. As soon as the milk starts to rise, stir thoroughly. 6. Repeat the process until the required consistency is
achieved. Using the microwave mode to make popcorn
WARNING Risk of burns! Airtight packaging may burst when food is heated. Always follow the instructions on the packaging. Always use oven gloves to remove the dishes from
the cooking compartment. 1. Use a microwave-safe, shallow ovenproof dish.
Do not use porcelain or deep plates. 2. Place the popcorn bag onto the cookware in ac-
cordance with the instructions on the packaging. 3. Use the recommended settings when configuring
the appliance settings. 4. The time may need to be adjusted, depending on
the product and quantity in question. 5. Remove the popcorn bag after 1½ minutes and
shake it to ensure that the popcorn does not burn. 6. Place the popcorn bag back into the oven and
leave it to continue popping. 7. Once you can only hear popping noises once every
2-3 seconds, switch off the appliance and take the popcorn bag out of the oven. 8. Wipe the cooking compartment clean afterwards.

Recommended settings for desserts and compote

Food

Accessory/cookware

Shelf pos- Type of Temperature in

ition

heating °C

Page 11

Blancmange made from Covered cookware 1

–

blancmange powder

1 Stir the food one or two times during cooking. 2 Place the sealed bag on the cookware.

Microwave Cooking

power setting time in

in W

mins

600

5-8 1

41

enHow it works

Food

Accessory/cookware

Shelf pos- Type of Temperature in

ition

heating °C

Page 11

Yoghurt

Individual moulds

Cooking compartment floor

40-45

Microwave popcorn, 1 x Uncovered cook- 1

–

100 g bag 2

ware

1 Stir the food one or two times during cooking. 2 Place the sealed bag on the cookware.

Microwave Cooking

power setting time in

in W

mins

–

8­9 hrs

600

4-6

30.7Special cooking methods and other applications
Information and recommended settings for special cooking methods and other applications, e.g. slow cooking.
Slow cooking Cook prime cuts of meat slowly at a low temperature, e.g. tender cuts of beef, veal, lamb or poultry.
Slow cooking poultry or meat Note: When using the slow cooking type of heating, you cannot delay the start of the programme by setting an end time. Requirement: The cooking compartment is cold. 1. Use fresh, clean, hygienic meat without bones. 2. Place the cookware onto the wire rack at level 1 in
the cooking compartment. 3. Preheat the cooking compartment and cookware for
approx. 15 minutes. 4. Sear the meat on all sides on the hob at a very high
heat.

5. Immediately place the meat into the pre-warmed cookware in the cooking compartment. To ensure that the temperature in the cooking compartment remains constant, keep the cooking compartment door closed during slow cooking.
Tips for slow cooking Here you will find tips for achieving good results when slow cooking food.

Issue You want to slow cook a duck breast.
You want to serve your slow-cooked meat as hot as possible.

Tip ¡ Place the cold duck breast
into a pan. ¡ Sear the skin side

References

• Home Appliances Global Website | Bosch
• Bosch home appliances: Experience quality, reliability and precision | Bosch UK
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch
• Connect your household | Home Connect

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>