BEGA 33 036 Square Ceiling and Wall Luminaire Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
**BEGA 33 036 Square Ceiling and Wall Luminaire Instruction Manual
**
Application
Lichtbausteinb Square
Ceiling and wall luminaire with hand-blown satin matt three-ply opal glass.
For a variety of interior and exterior lighting applications.
Product description
Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Opal glass satin matt 2 mounting holes ø 5.5mm
Distance apart 130mm
2 cable entries for through-wiring of mains supply cable ø 7-10.5mm
Connection terminal 2.5@
Earth conductor connection
BEGA Ultimate Driver®
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 44
Protected against granular foreign bodies
≥ 1 mm and splash water
Impact strength IK02
Protection against mechanical impacts < 0.2 joule
– Safety mark
– Conformity mark
Weight: 1.4 kg
This product contains light sources of energy efficiency classes C
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
Installation and commissioning may only be carried out by a qualified
electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation.
If subsequent modifications are made to the luminaire, the person responsible
for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e.g. transients, etc. we recommend
separate overvoltage protection components.
You can find them on our website at www.bega.com.
Lamp
Module connected wattage 3.8 W
Luminaire connected wattage 4.9 W
Rated temperature ta=25 °C
Ambient temperature ta max=50 °C
33 036K3
Module designation LED-0263/830
Colour temperature 3000 K
Colour rendering index CRI >80
Module luminous flux 755 lm
Luminaire luminous flux 509 lm
Luminaire luminous efficiency 103,9 lm/W
33 036K4
Module designation LED-0263/840
Colour temperature 4000 K
Colour rendering index CRI >80
Module luminous flux 780 lm
Luminaire luminous flux 526 lm
Luminaire luminous efficiency 107,3 lm/W
Installation
LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during
installation or relamping.
Lead the mains supply cable through the cable entry of the luminaire base.
Fix luminaire base with enclosed or any other suitable fixing material onto
the mounting surface.
Be sure to use the gasket rings supplied.
Make the earth conductor connection and the electrical connection.
Snap the opal glass into the lower spring clips, centralise and push into the
upper spring clips.
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high pressure cleaners.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted. The module can be replaced by
qualified persons using standard tools.
Disconnect the electrical installation.
Open the luminaire.
Please follow the installation instructions for the LED module.
Close the luminaire.
Spares
Spare glass 11 002 758 .0
LED power supply unit DEV-0303/350
LED module 3000 K LED-0263/830
LED module 4000 K LED-0263/840