BEGA 22 292 Wall Luminaire Instructions
- June 13, 2024
- BEGA
Table of Contents
BEGA 22 292 Wall Luminaire
Product Information
Product Name: Wandleuchte Wall luminaire Applique
Model Number: 55 22 292
IP Rating: IP 65
Usage: Wall luminaire for glare-free lighting of walls, traffic areas, and house entrances. Very robust luminaire with excellent lighting qualities.
Safety: The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning should only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage Protection: The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. For additional protection against transients, the manufacturer recommends separate overvoltage protection components available on their website at www.bega.com.
Lamp Specifications:
- Module connected wattage: 7.8 W
- Luminaire connected wattage: 9.5 W
- Rated temperature: 25°C
- Ambient temperature: 50°C
Product Usage Instructions
- Before installation, ensure that LED light output opening is not directly touched during installation or relamping.
- Undo the screws and lift off the luminaire top.
- Lead the mains supply cable through the cable entry into the luminaire housing.
- Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface. Use the gasket rings supplied.
- Make the earth conductor connection and the electrical connection.
- To maximize the service life of the electrical components, place the enclosed desiccant pouch in the luminaire.
- Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
Instructions for use
Application
Wall luminaire for glare-free lighting of walls, traffic areas and house
entrances. Very robust luminaire with excellent lighting qualities.
Product description
- Luminaire made of aluminium alloy, aluminium and stainless steel
- BEGA Unidure® coating technology
- Matt safety glass
- Silicone gasket
- Reflector made of pure anodised aluminium
- 2 mounting holes ø 5 mm
- Distance apart 120 mm
- 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
- Connecting terminal and
- earth conductor terminal 2.5@
- LED power supply unit
- 220-240 V x 0/50-60 Hz
- DC 176-280 V
- BEGA Thermal Switch®
- Temporary thermal shutdown to protect temperature-sensitive components
- Safety class I
- Protection class IP 65
- Dust-tight and protection against water jets Impact strength IK09
- Protection against mechanical
- impacts < 10 joule
- – Safety mark
- – Conformity mark
- Weight: 1.0 kg
- This product contains light sources of energy efficiency classes D
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547. To achieve an additional
protection against e. g. transients, etc. we recommend separate overvoltage
protection components. You can find them on our website at
www.bega.com.
Lamp
- Module connected wattage: 7.8 W
- Luminaire connected wattage: 9.5 W
- Rated temperature: ta = 25 °C
- Ambient temperature: ta max = 50 °C
22 292 K3
- Module designation: LED-0322/930
- Colour temperature: 3000 K
- Colour rendering index: CRI > 90
- Module luminous flux: 1235 lm
- Luminaire luminous flux: 627 lm
- Luminaire luminous efficiency: 66 lm / W
22 292 K4
- Module designation: LED-0322/940
- Colour temperature: 4000 K
- Colour rendering index: CRI > 90
- Module luminous flux: 1305 lm
- Luminaire luminous flux: 69,7 lm / W
- Luminaire luminous efficiency: 69,7 lm / W
Installation
- LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
- Undo the screws and lift off the luminaire top. Lead the mains supply cable through the cable entry into the luminaire housing.
- Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
- Be sure to use the gasket rings supplied. Make the earth conductor connection and the electrical connection.
- In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
- Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
- Make earth conductor connection between luminaire top and luminaire base.
- Make sure that gasket is positioned correctly. Replace the luminaire top and tighten the screws evenly.
- Tighten the screws uniformly in crosswise fashion.
Cleaning · Maintenance
- Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
- Do not use high pressure cleaners.
Replacing the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
- The module can be replaced by qualified persons using standard tools.
- Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
- Inspect and, if necessary, replace the luminaire gaskets.
- Defective glass must be replaced.
- Close the luminaire.
Spares
- LED power supply unit: DEV-0136/700
- LED module 3000 K: LED-0322/930
- LED module 4000 K: LED-0322/940
- Reflector: 76 001 386
- Gasket: 83 000 936
BEGA Gantenbrink-Leuchten KG
Postfach 31 60
58689 Menden
info@bega.com
www.bega.com