BEGA 78147.1 Wall Luminaire for Indoor Use Instruction Manual

: June 13, 2024
: BEGA

Table of Contents

BEGA 78147.1 Wall Luminaire for Indoor Use
Product Information
Product Usage Instructions
Spares

BEGA 78147.1 Wall Luminaire for Indoor Use

Product Information

Luminaire Efficiency	46%

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Usage Instructions

Safety: The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Spares

Spare Part	Part Number
Spare glass	11 002 799 .0R
LED lamp 2700 K	G 13 552
LED lamp 3000 K	G 13 594
Lampholder	63 000 051

DIMENSION

Application

Wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and metal housing, for all lighting tasks in interior applications. They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.

PRODUCT SPECIFICATION

Lamp

Luminaire with screw base E 14
Lamp output max. 3 × 40 W
This product contains light sources of energy efficiency class E
Supplied lamp
- 3 × BEGA LED lamp 13552
- LED Retrofit 4 W · 470 lm · 2700 K
Supplied lamp
- 3 × BEGA LED lamp 13594
- LED Retrofit 4 W · 470 lm · 3000 K
- Luminaire efficiency: 46%
- Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product description

Die-cast aluminium and aluminium housing, finish Colour white
Hand-blown opal glass, satin matt 2 mounting holes ø 5.5 mm
Distance apart 280,2 mm
1 cable entry for mains supply cable up to ø 10.5 mm max. 3 x 1.5@
Connection terminal 2.5@
Earth conductor connection
Lampholder E 14
Safety class I
Protection class IP 44
Protected against granular foreign bodies
≥ 1 mm and splash water
Impact strength IK02
Protection against mechanical
impacts < 0.2 joule
r – Safety mark
c – Conformity mark
Weight: 1.8 kg

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to
the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

Loosen screw of the lateral cover and take off the glass from the luminaire housing.
Lead the mains supply cable into the luminaire housing.
Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets. Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection to the terminals.
Insert lamp.
Position glass into the luminaire housing and fix it with the screw and the cover.