BEGA 33768 House Number Luminaire Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 33768 House Number Luminaire
DIMENSION
Instructions for use
Application
House number luminaire with weatherproof lettering for one or two digits or
letters. A luminaire that allows numbers and details to be recognized by day
and night.
Product Description
Luminaire made of aluminum alloy and stainless steel BEGA Unidure® coating
technology Opal glass with 1 or 2 numbers Lettering height 120 mm 2 mounting
holes ø 6mm Distance apart 110mm 2 cable entries for through-wiring of mains
supply cable ø 7-10.5mm 2 prefabricated cable ducts for surface mounted mains
supply cables ø 7–10,5mm Lampholder terminal 2.5@ Earth conductor connection
Lampholder E 27 Safety class I Protection class IP 44 Protected against
granular foreign bodies ≥ 1 mm and splash water Impact strength IK03
Protection against mechanical impacts < 0.35-joule r – Safety mark c –
Conformity mark Weight: 1.8 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations. Installation and commissioning may only be carried out by
a qualified electrician. The manufacturer accepts no liability for damage
caused by improper use or installation. If subsequent modifications are made
to the luminaire, the person responsible for these modifications shall be
considered the manufacturer.
Lamp
Luminaire with screw base E 27 Lamp output max. 60 W This product contains
light source of energy efficiency class E Supplied lamp BEGA LED lamp 13588
LED Retrofit 8 W · 1055 lm · 3000 K Luminaire efficiency: 51% Additional BEGA
LED lamps are available for this luminaire:
- 13 584 LED 7 W · 805 lm · 3000 K
- 13 586 LED 7 W · 805 lm · 3000 K dimmable
- 13 590 LED 12 W · 1400 lm · 3000 K
- 13 592 LED 12 W · 1400 lm · 3000 K dimmable
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Installation
Lead the mains supply cable through the cable entry into the luminaire housing. Note the position of application of the luminaire “arrow down”. Fix the luminaire base with enclosed or any other suitable fixing material onto the mounting surface. Be sure to use the gasket rings supplied. Make an earth conductor connection. Push silicone sleeves over the lines and make an electrical connection. Insert lamp. Snap the opal glass into the lower spring clips, centralise and push into the upper spring clips.
Relamping · Maintenance
Disconnect the electrical installation. Pull the glass out of the spring clips and remove it from the luminaire back housing. Clean the glass and luminaire housing using only suitable cleansers. When cleaning please do not use high- pressure cleaners. Change the lamp. Snap the glass into the lower spring clips, centralize, and push into the upper spring clips.
Spares
- Spare glass 11 002 057 .1
- LED lamp 3000K 13 588
- Lampholder 63 000 052