BEGA 33485 Wall Luminaire Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 33485 Wall Luminaire
Product Information
The Wandleuchte Wall Luminaire Applique is a shielded wall luminaire with a high protection class (IP 65) suitable for various lighting tasks. It is constructed with an aluminium alloy body and crystal glass. The luminaire can be installed in any burning position and is designed for indoor use. The luminaire features a screw base E 27 socket and has a maximum lamp output of 75 W. It comes with a supplied lamp that has a luminous efficacy of 45%. The product is energy efficient, classified as energy efficiency class E. Additional BEGA LED lamps are available for this luminaire. The radio- controlled version (Zigbee 3.0) is also available for enhanced functionality. For detailed technical and lighting data, refer to the data sheets available on the manufacturer’s website.
Product Usage Instructions
- Before installation, ensure that you read and understand the national safety regulations applicable to the installation and operation of the luminaire.
- Installation and commissioning should only be carried out by a qualified electrician.
- Use the provided joints during installation.
- Install the lamp into the luminaire.
- Place the glass and frame over the lamp.
- Tighten the screws to secure the glass and frame in place.
- Open the luminaire and clean it using appropriate cleaning products. Do not use high-pressure cleaners for cleaning.
- Close the luminaire after cleaning.
Spare Parts
- Spare glass: 11 003 499
- LED lamp 3000K: 13 590
- Lampholder: 63 000 052
- Gasket glass: 83 000 955
DIMENSIONS
Instructions for use
Application
- Shielded wall luminiaire with high protection class for a variety of lighting tasks.
- A luminaire made of aluminium alloy and crystal glass.
- The luminaire can be installed in any burning position.
Product Description
- Luminaire made of aluminium alloy, aluminium and stainless steel
- BEGA Unidure® coating technology
- Crystal glass, white inside 2 mounting holes ø 4.5 mm
- Distance apart 250 mm
- 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
- Connection terminal 2.5@
- Earth conductor connection
- Lampholder E 27
- Safety class I
- Protection class IP 65
- Dust-tight and protection against water jets
- Impact strength IK05
- Protection against mechanical
- impacts < 0.7 joule
- – Safety mark
- – Conformity mark
- Weight: 3.4 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Lamp
- Luminaire with screw base E 27
- Lamp output max. 75 W
- This product contains light source of energy efficiency class E
- Supplied lamp
- BEGA LED lamp 13 590
- LED Retrofit 12 W · 1400 lm · 3000 K
- Luminaire efficiency: 45%
- Additional BEGA LED lamps are available for this luminaire:
- 13 584 LED 7 W · 805 lm · 3000 K
- 13 586 LED 7 W · 805 lm · 3000 K dimmable
- 13 588 LED 8 W · 1055 lm · 3000 K
- 13 592 LED 12 W · 1400 lm · 3000 K dimmable
- Radio-controlled version (Zigbee 3.0):
- 13 555 LED 9 W · 805 lm · 2700 K dimmable
- 13 556 LED 9 W · 805 lm · 2700 – 6500 K dimmable · tunable white
- 13 557 LED 9.5 W · 805 lm · 2700 – 6500 K dimmable · tunable white · RGBW
- Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Installation
- Undo hexagon socket head screws.
- Remove frame and glass.
- Lead the mains supply cable through the cable entry into the luminaire back housing.
- Fix the luminaire back housing with enclosed or any other suitable fixing material onto the mounting surface.
- It is absolutely essential to use the enclosed ring gaskets.
- Make earth conductor connection.
- Push silicone sleeves over the lines and make electrical connection.
- Insert lamp.
- Insert glass and frame.
- Make sure that the gasket is positioned correctly.
- Tighten screws crosswise evenly.
Relamping · Maintenance
- Disconnect the electrical installation.
- Open the luminaire and clean.
- Use only solvent-free cleaning agents. Change the lamp.
- Check the gasket and replace, if necessary.
- Close the luminaire.
- For cleaning, do not use high pressure cleaners.
Spares
- Spare glass 11 003 499
- LED lamp 3000K 13 590
- Lampholder 63 000 052
- Gasket glass 83 000 955
BEGA Gantenbrink-Leuchten KG
- Postfach 31 60
- 58689 Menden
- info@bega.com
- www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>