BEGA 31431 Wall Luminaire Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 31431 Wall Luminaire
Product Information
Product Description| Luminaire made of aluminum alloy with crystal bubble
glass
---|---
Application| For many lighting tasks in or on buildings
Safety Class| Class I
Protection Class| IP 44 (Protected against granular foreign bodies 1 mm and
splash water)
Impact Strength| IK02
Weight| 2.8 kg
Lampholder| E27
Lamp Output| Max. 100 W
Luminaire Efficiency| 55%
Product Usage Instructions
- Remove the glass.
- Install the lamp.
- Clean the luminaire. Use only maintenance products that are not high-pressure cleaners.
- Close the luminaire.
Spares
| Spare Glass | 11 002 613 .3 13 584 |
|---|---|
| LED Lamp (3000K) | 63 000 355 |
| Lampholder | 11 002 613 .3 13 584 |
DIMENSIONS
Instructions for use
Application
- Wall luminaire with crystal bubble glass.
- For many lighting tasks in or on buildings.
Product Description
- Luminaire made of aluminium alloy and stainless steel
- BEGA Unidure® coating technology
- Antique glass
- Mounting plate with 2 fixing holes ø 5.2 mm · 70 mm spacing
- 1 cable entry for mains supply cable up to ø 10,5 mm
- Connecting terminal 2.5@ with plug connection
- Earth conductor connection
- Lampholder E 27
- Safety class I
- Protection class IP 44
- Protected against granular foreign bodies ≥ 1 mm and splash water
- Impact strength IK02
- Protection against mechanical impacts < 0.2 joule
- – Safety mark
- – Conformity mark
- Weight: 2.8 kg
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- Installation and commissioning may only be carried out by a qualified electrician.
- The manufacturer accepts no liability for damage caused by improper use or installation.
- If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Lamp
- Luminaire with screw base E 27
- Lamp output max. 100 W
- This product contains light source of energy efficiency class E
- Supplied lamp
- BEGA LED lamp 13 584
- LED Retrofit 7 W · 805 lm · 3000 K
- Luminaire efficiency: 55%
- Additional BEGA LED lamps are available for this luminaire:
- 13 586 LED 7 W · 805 lm · 3000 K dimmable
- 13 588 LED 8 W · 1055 lm · 3000 K
- 13 590 LED 12 W · 1400 lm · 3000 K
- 13 592 LED 12 W · 1400 lm · 3000 K dimmable
- Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Installation
- Undo screw at wall bracket.
- Remove mounting plate from wall bracket.
- Pass the power connecting cable through the cable entry in the mounting plate.
- Note position of application of the mounting plate “arrow down”.
- Fix the mounting plate with enclosed or any other suitable fixing material onto the mounting surface.
- Be sure to use the gasket rings supplied.
- Make the earth conductor connection and the electrical connection.
- Make earth conductor connection between wall arm and mounting plate.
- Push plug into coupler as far as it will go.
- Note position of application of the luminaire “arrow down”.
- Place the luminaire onto the mounting plate, adjust and fix it.
- Open luminaire.
- Undo screw in luminaire top and remove it.
- Remove glass.
- Insert lamp.
- Insert glass and assemble luminaire top.
- In case a compact fluorescent lamp is used the outer lampholder sleeve can be shifted upwards to cover the lamp base completely.
Relamping · Maintenance
- Disconnect the electrical installation.
- Open the luminaire and clean.
- Use only solvent-free cleaning agents. Change the lamp.
- Check the gasket and replace, if necessary.
- Close the luminaire.
- For cleaning, do not use high pressure cleaners.
Spares
- Spare glass 11 002 613 .3
- LED lamp 3000K 13 584
- Lampholder 63 000 355
BEGA Gantenbrink-Leuchten KG
- Postfach 31 60
- 58689 Menden
- info@bega.com
- www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>