BEGA 33767 Light Brick Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 33767 Light Brick
Product Information
| Product Description: | Luminaire made of aluminium alloy |
|---|---|
| Opal Glass: | Satin matt |
| Distance Apart: | 85 mm |
| Earth Conductor Connection: | Lampholder E27 |
| Safety Class: | I |
| Protection Class: | IP44 |
| Impact Strength: | IK03 |
| Weight: | 2.8 kg |
Product Usage Instructions
- Lead the mains supply cable through the cable entry of the luminaire base.
- Fix the luminaire base with the enclosed or any other suitable fixing material onto the mounting surface. Ensure to use the gasket rings supplied.
- Make the earth conductor connection.
- Push silicone sleeves over the lines and make the electrical connection.
- Insert the lamp. Insert the opal glass into the fixed springs, push it centrally, and fix it with the screwable spring.
Dimension
Instructions for use
Application
Lichtbaustein® The cube Ceiling and wall luminaire with hand-blown satin matt
three-ply opal glass. For a variety of interior and exterior lighting
applications.
Product description
Luminaire made of aluminium alloy and stainless steel BEGA Unidure® coating
technology Opal glass satin matt 2 mounting holes ø 6.5 mm Distance apart 85
mm 1 cable entry for mains supply cable up to ø 10,5 mm 2 prefabricated cable
ducts for surface mounted mains supply cables ø 7–10,5 mm Lampholder terminal
2.5@Earth conductor connection Lampholder E 27 Safety class I Protection
class IP 44 Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK03 Protection against mechanical impacts < 0.35 joule r –
Safety mark c – Conformity mark Weight: 2.8 kg
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
- Lamp
- Luminaire with screw base E 27
- Lamp output max. 100 W
- This product contains light source of energy
- efficiency class E
- Supplied lamp
- BEGA LED lamp 13 590
- LED Retrofit 12 W · 1400 lm · 3000 K.
- Luminaire efficiency: 69%
- Additional BEGA LED lamps are available for this luminaire:
- 13 584 LED 7 W · 805 lm · 3000 K
- 13 586 LED 7 W · 805 lm · 3000 K dimmable
- 13 588 LED 8 W · 1055 lm · 3000 K
- 13 592 LED 12 W · 1400 lm · 3000 K dimmable
Detailed technical and lighting data for the lamps can be found in the data
sheets on our website.
Installation
Lead the mains supply cable through the cable entry of the luminaire base. Fix
luminaire base with enclosed or any other suitable fixing material onto the
mounting surface. Be sure to use the gasket rings supplied. Make earth
conductor connection. Push silicone sleeves over the lines and make electrical
connection. Insert lamp. Insert the opal glass into the fixed springs, push
it centrical and fix with the screwable spring.
Relamping · Maintenance
Undo screw of the sliding spring up to the stop. Pull off opal glass from the
luminaire back housing. Clean the glass using only suitable cleansers. Change
the lamp. Place opal glass onto the luminaire back housing. Tighten screw of
sliding spring. When cleaning please do not use high-pressure cleaners.
- Spares
- Spare glass 11 002 243 .0
- LED lamp 3000K 13 590
- Lampholder 63 000 105
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>