BEGA 33335 Wall Luminaire Instruction Manual

June 13, 2024
BEGA

BEGA 33335 Wall Luminaire

BEGA-33335-Wall-Luminaire-product

Product Information

Product Name Wandleuchte Wall luminaire Applique
Model Number 245
IP Rating IP 65
Weight 2.0 kg
Light Source Luminaire with screw base E 27
Lamp Output Max. 60 W
Luminaire Efficiency 39%

Product Usage Instructions

Application:
Wall luminaire with light emission on two sides. Fully glare-free light for illuminating wall surfaces and roadways adjacent to the walls. Suitable for interior and exterior lighting design.

Safety:
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning should only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation:

  1. Loosen the screws.
  2. Remove the front part of the luminaire.
  3. Install the lamp.
  4. Ensure the proper placement of the gasket.
  5. Replace the front part of the luminaire and tighten the screws.

Cleaning:
Open the luminaire and clean it. Use only cleaning products specifically designed for this purpose. Do not use high-pressure cleaners for cleaning.

Spares:

Spare Part Part Number
Spare glass 11 002 766
LED lamp 3000K 11 13 584
Lampholder 63 000 052
Gasket 83 001 221

Application

  • Wall luminaire with light emission on two sides.
  • Fully glare-free light for illuminating wall surfaces and roadways adjacent to the walls. For interior and exterior lighting design.

Product Description

  • Luminaire made of aluminum alloy and stainless steel
  • BEGA Unidure® coating technology
  • Crystal glass coated
  • Silicone gasket 2 mounting holes ø 5.5 mm
  • Distance apart 75 mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
  • Lampholder terminal 2.5@
  • Earth conductor connection
  • Lampholder E 27
  • Safety class I
  • Protection class IP 65
  • Dust-tight and protection against water jets
  • Impact strength IK07
  • Protection against mechanical impacts < 2 joule
    • Safety mark
    • Conformity mark
  • Weight: 2.0 kg

Safety

  • The installation and operation of this luminaire are subject to national safety regulations.
  • Installation and commissioning may only be carried out by a qualified electrician.
  • The manufacturer accepts no liability for damage caused by improper use or installation.
  • If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Lamp Specification

  • Luminaire with screw base E 27
  • Lamp output max. 60 W
  • This product contains light source of energy efficiency class E
  • Supplied lamp
  • BEGA LED lamp 13 584
  • LED Retrofit 7 W · 805 lm · 3000 K
  • Luminaire efficiency: 39%

Additional BEGA LED lamps are available for this luminaire:

  • 13 586 LED 7 W · 805 lm · 3000 K dimmable
  • 13 588 LED 8 W · 1055 lm · 3000 K
  • 13 590 LED 12 W · 1400 lm · 3000 K
  • 13 592 LED 12 W · 1400 lm · 3000 K dimmable

Radio-controlled version (Zigbee 3.0):

  • 13 555 LED 9 W · 805 lm · 2700 K dimmable
  • 13 556 LED 9 W · 805 lm · 2700 – 6500 K dimmable · tunable white
  • 13 557 LED 9.5 W · 805 lm · 2700 – 6500 K dimmable · tunable white · RGBW

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Installation

  • Undo screws. Remove the luminaire cover and glass.
  • Note the position of application of the luminaire “arrow down”.
  • Fix the luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
  • Be sure to use the gasket rings supplied.
  • Make an earth conductor connection.
  • Push silicone sleeves over the lines and make an electrical connection.
  • Insert lamp.
  • Make sure that gasket is positioned correctly.
  • Put the luminaire cover and the glass onto the luminaire back housing and tighten the screws evenly.

Dimension

BEGA-33335-Wall-Luminaire-fig-1

Relamping And Maintenance

  • Disconnect the electrical installation.
  • Open the luminaire and clean it.
  • Use only solvent-free cleaning agents. Change the lamp.
  • Check the gasket and replace, it if necessary.
  • Close the luminaire.
  • For cleaning, do not use high-pressure cleaners.

Spares

  • Spare glass 11 002 766 11
  • LED lamp 3000K 13 584
  • Lampholder 63 000 052
  • Gasket 83 001 221

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals