BEGA 51148.6 Wall Luminaire for Indoor Use Instruction Manual

: June 13, 2024
: BEGA

Table of Contents

BEGA 51148.6 Wall Luminaire for Indoor Use
Product Information
DIMENSION
Product description
Installation
Cleaning · Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 51148.6 Wall Luminaire for Indoor Use

Product Information

The product is a wall luminaire from the STUDIO LINE series, featuring a satin black finish. It has an aluminium housing shield and a velvet black finish color. The inside hue of the luminaire is matt copper. It is equipped with light-diffusing synthetic disks with an optical structure. The luminaire has a weight of 1.6 kg and contains energy-efficient light sources.

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. However, for additional protection against transients and other factors, separate overvoltage protection components are recommended.

The luminaire is designed for professional installation and operation. It must be installed and commissioned by a qualified electrician. The manufacturer does not accept liability for any damage caused by improper use or installation. If any modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.

DIMENSION

BEGA-51148-6-Wall-Luminaire-for-Indoor-Use-FIG-1

Application
Wall luminaire · indoor luminaire with velvet black luminaire housing and inside hue.
The light emits upwards and downwards. Luminaire slope angle: 18°.

Product description

Wall luminaire “STUDIO LINE” Satin black finish
Aluminium housing shield,
Finish Colour velvet black inside hue matt copper
Light-diffusing synthetic disks with optical texture 2 elongated fixing holes
Width 4.5 mm · 26 x 28 mm spacing 1 cable entry for mains supply cable Connecting terminals 2.5@
Earth conductor terminal
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-275 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
- CE – Conformity mark
- Weight: 1.6 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 17.1 W
Luminaire connected wattage 19.5 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 30 °C

51 148.6 K3

Module designation
LED-1224/930 + LED-1225/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 2820 lm
Luminaire luminous flux 1315 lm
Luminaire luminous efficiency 67,4 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Undo the hexagon socket head screw (wrench size 2.5 mm) and lift luminaire.
Unplug the earth conductor connection (plug contact).
Pass the power connecting cable
through the cable entry in the mounting plate. Fasten the mounting plate with the supplied fastening material or other suitable fastening material to the installation surface.
Note position of application of the
mounting plate “arrow down”.
Establish the earth conductor connection on the earthing screw (1) of the mounting plate. Push silicone sleeves over the lines.
Make the electrical connection to the terminals. Observe the correct configuration of the connecting cable. Connect the live conductor to the brown wire (L) and the neutral conductor to the blue wire (N).
The two connecting terminals marked DA, DA are provided for digital control purposes.
If these terminals are not assigned, the luminaire will work with full light output.
Make earth conductor connection between luminaire housing and mounting plate (plug contact).
Place connecting terminals inside the luminaire wall bracket.
Install luminaire over mounting plate and tighten hexagon socket head screw (wrench size 2.5 mm) evenly.
Guide the housing shield provided over the luminaire’s light-diffusing synthetic lenses and into its end position.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Defective luminaire cover must be replaced. Close the luminaire.

Spares