weJupit WJEXT15-3 10×1 Wireless Group Meeting Presentation System User Manual

June 6, 2024
weJupit

WeJupit WJEXT15-3 10x1 Wireless Group Meeting Presentation System User Manual

weJupit WJEXT15-3 10×1 Wireless Group Meeting Presentation System User
Manual

Important Safety Notice

Please read below safety instructions carefully before installation and operation:

  1. Please pay attention to all the warnings and hints on this device.
  2. Do not expose this unit to rain, moisture and liquid.
  3. Do not put any stuff into the device.
  4. Do not repaired the device or open the enclosure without professional person guidance to avoid electronic shock.
  5. Make sure good ventilation openings to avoid product overheating damage.
  6. Use DC5V/2A only. Make sure the specification matched if using 3rd party DC adapters.

Introduction

This HDMI wireless extender includes transmitter unit and receiver unit, allows to transmit and extend HDMI signal up to 15 meters long away wirelessly, it has strong anti-interference ability by running at 5GHz operation frequency, and supports one to one, many to one connection. It is really a very good solution for meeting, conference, home entertainment and multi-media education etc.
Note:

  1. Transmission distance will be different due to the environment.
  2. Wall, brick or glass will shorten the signal cover range or cause big signal loss.

Features

  1. Plug and play, easy installation
  2. High resolution up to 1080p@60Hz full HD
  3. Support point to point ,many to point configuration
  4. Support HDMil.3, compatible with HDCPl.2
  5. 15 meters long range transmission sight distance
  6. Smart portable design, excellent performance
  7. Support select transmitter via switch button freely
  8. Transmitter powered by input sources through HDMI port(when the transmission/connection is not stable, or the output is not fluent, please connect Micro USB cable to the DC5V port for power supply)
  9. Strong anti-interference ability by running at 5GHz operation frequency

Package Contents

weJupit WJEXT15-3 10×1 Wireless Group Meeting Presentation System User
Manual - Package Contents

Installation Requirement

  1. HDMI source device (DVD, PS3, Set top box, PC etc)
  2. HDMI display device like SDTV, HDTV, and projector with HDMI port.

Panel Description

weJupit WJEXT15-3 10×1 Wireless Group Meeting Presentation System User
Manual - Panel DescriptionweJupit WJEXT15-3 10×1 Wireless Group Meeting
Presentation System User Manual - Panel Description

[NOTE] This device can be powered from the HDMI source device (which with HDMI input port) directly. However, when the transmission/connection is not stable, or the output is not fluent, please connect Micro USB cable to the DC5V port for power supply.

2.HDMI Extender RX receiver

weJupit WJEXT15-3 10×1 Wireless Group Meeting Presentation System User
Manual - HDMI Extender RX receiver

Connection

  1. Point to Point connection:

weJupit WJEXT15-3 10×1 Wireless Group Meeting Presentation System User
Manual - Point to Point connection

  1. many to one connection

weJupit WJEXT15-3 10×1 Wireless Group Meeting Presentation System User
Manual - Many to one connection

Connection instruction:

  1. Plug the transmitter into the source device.
  2. Connect HDMI output to HDMI display device by HDMI cable.
  3. Power on the device (power led lights) and it works.

Note:

  1. When the wireless signal transmits through wall, glass or other obstacles, it will cause signal loss. Please install this device in good environment with few obstacles.
  2. The external environment wireless signal will affect transmission, such as micro waver, wireless mouse and keyboard etc.

FAQ

Q: Transmitter and receiver can’t be connected with each other?

A: 1) Please check if the wireless connection light on product blinks properly.
2) Restart the transmitter or receiver.
3) Reconnect the HDMI cable or use another HDMI cable and try again.
4) Please change the location of sender (TX) and receiver (RX) and make sure devices is within the signal coverage.

Q: The wifi LED indicator of the transmitter keeps on, but no signal output on display/monitor?

A: 1) please check if there is an HDMI signal input of sender TX
2) Try to connect the signal source directly to display device to see if there is signal output from source device or change the signal source, the resolution of input signal, HDMI cables and try again.

Q: Display not fluent and stable

A: 1) Please change the location of sender (TX) and receiver (RX) and make sure devices is within the signal coverage.
2) Restart the transmitter or receiver.
3) Reconnect the HDMI cable.
4) Remove other wireless signal disturbance and reduce the obstacle on the way.

Specification

weJupit WJEXT15-3 10×1 Wireless Group Meeting Presentation System User
Manual - Specification

Disclaimer

The product name and brand name may be registered trademark of related manufactures.'” and® may be omitted on the user manual. The pictures in this user manual are just for reference. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals