VANTOP Leisure 30W Projector for Home Entertainment User Manual
- June 13, 2024
- VanTop
Table of Contents
Leisure 30W
Projector for Home Entertainment
USER Manual
V2.05
PACKING LIST
FUNCTION OVERVIEW
QUICK START
INPUT SOURCE
Press the input source button on the projector/remote to enter the interface of Input Source.
PROJECTOR CONNECTION
WIFI CONNECTION
Step 1: Go to Homepage > SCREEN CAST > WiFi to connect the projector to your
routers WiFi.
Step 2: Select Wireless to start connecting to a working WiFi from the search
list.
SCREEN MIRRORING
For iOS System
Step 1: Connect the projector and your mobile device to the same routers WiFi
or directly connect your mobile device to the projectors AP hotspot.
Tip: When you are using the projectors AP hotspot. the content will be
mirrored via the cellular data.
Step 2: Go to Homepage > SCREEN CAST to enter the interface below.
Step 3: Select iOS Cast to enter the following interface.
Step 4: Go to the Control Center of your iOS device. then tap Screen
Mirroring/Air Playing to search for the projector.
Steps: Select VANKY0***’ from the list. The contents on your iOS device
will be mirrored to the projection screen/wall after a successful connection.
For Android System
To activate this function, please make sure your Android device supports
Multi-screen/Smart View/ Wireless Display. Names may vary on different Android
devices.
Step 1: Go to the WiFi settings of your Android device to switch on the option
of WiFi.
Note: Successful WiFi connection is not a must, but please make sure the
WiFi is ON on your Android device.
Step 2: Go to 1-lomepage > SCREEN CAST to enter the interface below.
Step 3: Select Miracast to enter the following interface.
Step 4: Activate the Multi-screen/Smart View/Wireless Display function on your
Android device and search the projector.
Step 5: Select VANKY0*** from the list. The contents on your Android
device will be mirrored to the projection screen/wall after a successful
connection.
DLNA(Screen Cast)
Step 1: Connect the projector and your mobile device to the same router’s
WiFi.
Step 2: Go to Homepage > SCREEN CAST to enter the interface below.
Step 3: Select OLNA to enter the following interface.
Step 4: Launch a video-playing App on your mobile device and play a video.
Step S: Tap the icon and search for the projector.
Step 6: Select VANKYO-nan from the list. The contents on your device will be
mirrored to the projections screen/wall after a successful connection.
Tip: When you cast a video from your mobile device, the video will be
only displayed on the projected screen and you can still use your mobile
device without interrupting the video or showing any of your other content.
PROJECTION DISTANCE&SIZE
- The recommended projection distance varies with different projection contents. Please adjust the distance between the wall/screen and the projector properly as needed.
- Ambient darkness will improve the clarity of the projected images.
SPECIFICATION
| Display Technology | LCD | Light Source | LED |
|---|---|---|---|
| Resolution | Input Signal | 576i/576P/720/720P/ |
1 10800080p
Installation Type| Aspect Ratio| 4:3,116:9/AutO
Focus| Keystone +- 15
TROUBLESHOOTING GUIDE
- The copyrighted contents from Hulu, Netflix, and similar services can not be mirrored or cast.
- Due to the copyright restriction from Hulu, Netflix, and similar services, the contents MAY NOT be mirrored or cast. 2. What should I do if I want to watch the copyrighted contents from Hulu. Netflix. and similar services via the projector?
- Please prepare a Fire TV stick, Roku stick or Chromecastim (not included), then connect it to the projector to watch the contents. 3. Blurry image
- Adjust the focus ring/keystone.
- The projector and screen/wall must be in the effective distance. 4. Can I play a video with 4K resolution via a USB drive?
- The 4K video contents can be presented by connecting the projector to a laptop or a 1V stick, but it cannot be presented via a USB drive. 5. Remote unresponsive
- Make sure the remote points at IR receiver directly.
- Do not cover the IR receiver. Replace the old AAA batteries with new ones. 6. Upside down images
- Go to Homepage > Settings > PICTURE > Rotate Front Projection to flip the projection image. 7. Factory reset
- Go to Homepage >Settings > OPTION > Restore Factory Default to restore the projector to default settings.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction& may cause harmful interference to radio
communications However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception. which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radionV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
ISEDC Warning
This device complies with Industry Canada licence-exempt PSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. Cet emetteur ne doit pas etre colocalise ou
fonctionner en conjonction avec une autre antenne ou un autre emetteur.
VAN KYO SUPPORT
North America support@ivankyo.com
| 
| 
---|---|---
www.ivankyo.com| @VankyoOfficial| VANKYO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>