BEGA 50753.4 Floor Lamp for Indoor Use Instruction Manual

June 13, 2024
BEGA

50753.4 Floor Lamp for Indoor Use
Instruction ManualBEGA 50753.4 Floor Lamp for Indoor
Use 50 753.4
Technical amendments reserved

50753.4 Floor Lamp for Indoor Use

Floor lamp for indoor useBEGA 50753.4 Floor Lamp for Indoor Use -
parts

Instructions for use

Application

Floor lamp · indoor luminaire with impact resistant synthetic diffuser and metal housing for shielded light, deflected upwards and downwards.

Product description

Floor lamp »STUDIO LINE«
Metal housing, finish Colour velvet black
Aluminium housing shield,
Finish Colour velvet black inside hue matt brass
Impact-resistant synthetic cover, translucent white
Touch-controlled dimmer for infinite light adjustment
Black cable · 2 m, with safety plug
LED power supply unit 220-240 V 50-60 Hz
BEGA Thermal Control ®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
– Conformity mark
Weight: 16.7 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.
Lamp

Module connected wattage 40.6 W
Luminaire connected wattage 45.5 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 55 °C

50 753.4 K3

Module designation LED-0832/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 6640 lm
Luminaire luminous flux 4152 lm
Luminaire luminous efficiency 91,3 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Carefully remove the floor lamp from its packaging and set it up. Make sure that the luminaire is in a firm and secure position.
Connect luminaire to mains supply (230 V). Press sensing device gently to turn the luminaire on or off.
Holding the sensing device enables to adjust the light intensity infinitely.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.
We recommend that you dry-clean the sensing device.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Defective luminaire cover must be replaced.
Close the luminaire.
Spares

Synthetic cover 15 000 633
LED power supply unit DEV-0338/1050i
LED module 3000 K LED-0832/930
Shield 71 003 354 B27

BEGA Gantenbrink-Leuchten KG
Postfach 31 60
58689 Menden
info@bega.com
www.bega.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals