BEGA 50916.6 Table Lamp for Indoor Use Instruction Manual

BEGA 50916.6 Table Lamp for Indoor Use

Product Information

Safety| The installation and operation of this luminaire are subject to
national safety regulations. The manufacturer accepts no liability
for damage caused by improper use or installation. If subsequent
modifications are made to the luminaire, the person responsible for
these modifications shall be considered the manufacturer.
---|---
Overvoltage protection| The electronic components installed in the luminaire are
protected against overvoltage in accordance with DIN EN 61547. To
achieve additional protection against e.g. transients, etc. we
recommend separate overvoltage protection components. You can find
them on our website at www.bega.com.
The lamp Module connected wattage| 11.5 W
Luminaire connected wattage| 13.5 W
Rated temperature| 25°C to 55°C
Ambient temperature| 25°C to 55°C
Module designation| LED-0978/930
Color temperature| 3000 K
Color rendering index (CRI)| Greater than 90
Module luminous flux| 1735 lm
Luminaire luminous flux| 1029 lm
Luminaire luminous efficiency| 76.2 lm/W

Product Usage Instructions

Installation:

• LEDs are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
• Set the desired beam direction by tilting the luminaire.

Replacing the LED module:

• The designation of the LED module is noted on a label in the luminaire.
• The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted.
• The module can be replaced by qualified persons using standard tools.
• Disconnect the electrical installation.
• Open the luminaire.
• Please follow the installation instructions for the LED module.
• Close the luminaire.

Note:

For this luminaire, wooden bases on 3 surfaces are optional and available as accessories. They must be ordered separately.

Spares:

Dimension

Instructions for use

Application

• Table lamp · indoor luminaire with wide beam light distribution.
• Luminaire for positioning on a wooden base for a variety of lighting situations with adjustable light.
• The wooden base is optionally available in three different color versions, as listed below.

Product Description

• Table lamp »STUDIO LINE«
• Cast aluminum luminaire housing, finish Colour velvet black, inside hue matt copper
• Trim ring · Chrome finish
• Clear safety glass
• Light-diffusing silicone lens
• Reflector made of pure anodized aluminum
• Cable dimmer (touch-controlled dimmer) for infinite light adjustment
• Black cable · 2,5m, with safety plug
• LED power supply unit 220-240 V x 0/50-60 Hz
• DC 196-250 V
• Safety class I
• c – Conformity mark
• Weight: 1.8 kg
• This product contains light sources of energy efficiency class(es) D

Safety

• The installation and operation of this luminaire are subject to national safety regulations.
• The manufacturer accepts no liability for damage caused by improper use or installation.
• If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

• The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
• To achieve additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
• You can find them on our website at www.bega.com.

Lamp

• Module connected wattage 11.5 W
• Luminaire connected wattage 13.5 W
• Rated temperature ta= 25 °C
• Ambient temperature ta max= 55 °C

50 916.6K3

• Module designation LED -0978/930
• Color temperature 3000 K
• Color rendering index CRI > 90
• Module luminous flux 1735 lm
• Luminaire luminous flux 1029 lm
• Luminaire luminous efficiency 76,2 lm/W

Installation

• LED are high-quality electronic components!
• Please avoid touching the light output opening of the LED directly during installation or relamping.
• For precise positioning of reflector and cover ring, it is advisable to lift the luminaire at the connecting cable. The opening of the luminaire housing points downwards.
• Screw enclosed trim ring with attached reflector into the luminaire housing by turning it clockwise.
• Position luminaire on the separate wooden base. Insert the connecting cable into the groove of the wooden base.
• For this purpose, wooden bases in three different surfaces are available – accessories 13 209, 13 208 and 13 277.
• Connect luminaire to mains supply (230 V).
• Press the sensing device gently to turn the luminaire on or off.
• Holding the sensing device enables to adjust the light intensity infinitely.
• Set the desired beam direction by tilting the luminaire.

Cleaning · Maintenance

• Clean the luminaire regularly with solvent-free cleansers from dirt.
• We recommend that you dry-clean the sensing device.

Replacing the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
• Disconnect the electrical installation.
• Open the luminaire.
• Please follow the installation instructions for the
• LED module.
• Close the luminaire.

Accessory · Wooden bases

• For this luminaire wooden bases on 3 surfaces are optionally available.
• Wooden bases are accessories and must be ordered separately

Part. No

• Natural oak 13 209
• Ash Black 13 208
• Ash White 13 277

Spares

• Glass/Trim ring 20 000 042 B4
• LED power supply unit DEV- 0305/350
• Connecting cable with dimmer 62 001 185
• LED module 3000 K LED -0978/930
• Reflector 75 0 02 770
• BEGA Gantenbrink-Leuchten KG
• Postfach 3160
• 58689 Menden
• info@bega.com
• www.bega.com

Documents / Resources

| BEGA 50916.6 Table Lamp for Indoor Use [pdf] Instruction Manual
50916.6K3, LED-0978-930, 50916.6 Table Lamp for Indoor Use, 50916.6 Table Lamp, Table Lamp for Indoor Use, Table Lamp, Lamp
---|---

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>