SLV 1003014 Wand Und Ceiling Light Instruction Manual
- June 1, 2024
- SLV
Table of Contents
SLV 1003014 Wand Und Ceiling Light
Specifications
- Model: A C/L 1003014
- Power Supply: 220V-240V ~50/60Hz
- Power Consumption: 8.5W
- Luminous Flux: 460 lm
- Color Temperature: 3000K
- Color Rendering Index (CRI): >90
- Dimensions: 11.5 x 11.5 x 3.5 cm
- Weight: 0.27 kg
Product Usage Instructions
Safety Guidelines:
Read the manual carefully and keep it for future reference. Installation should be done by an approved electrician following local regulations. Do not alter, modify, cover, or fasten anything on the product. Do not stare into the active light source.
Care and Maintenance:
Disconnect the product from the mains before cleaning. Clean external surfaces with a slightly moistened cloth. Store the product in a dry and clean place.
Installation:
Switch off the mains and use only described accessories and suitable fastening materials. Install on wall or ceiling surfaces as shown in the figure provided. Use the appropriate dimmer (Leading-edge phase dimmer (Code L) / Trailing-edge phase dimmer (Code C)).
Electrical Connection:
Equip flexible wire ends with suitable wire ferrules. Connect live conductor to Terminal L, neutral conductor to Terminal N, and protective conductor to Earth terminal. Check for secure fixation and proper function.
FAQ
Q: Who can replace the light source of the luminaire?
A: The light source may only be replaced by the manufacturer, an authorized service technician, or a qualified person.
Q: What safety class does the product belong to?
A: Safety class I (1) – Connection with protective conductor.
Q: What should I do if I suspect a defect or malfunction?
A: Take the product out of service and contact your dealer or a qualified electrician for assistance.
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
Operating Manual PART B
Wall- and Ceiling Light
1003014 …17
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact
- your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
- Do not stare into the active light source.
- Additional safety advices =
Use as directed
- Safety class I (1) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor area.
- Do not strain mechanically or expose to strong dirt contamination.
Light Source
- The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
- This product contains a light source of the energy efficiency class E.
Care / Storage
- Disconnect product from mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for wall and ceiling surface mounting.
- Install as shown in the figure.
- Suitable Dimmer: Leading-edge phase dimmer (Code L) / Trailing-edge phase dimmer (Code C). Note manufacturers instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
- Live conductor Terminal L
- Neutral conductor Terminal N
- Protective conductor Earth terminal
Check secure fixation and proper function!
© 0001 25.08.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China