CRYSTORAMA ADD-312-CH-AU Addis 12 Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA ADD-312-CH-AU Addis 12 Light Chandelier
WARNING:
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate ocal electrical
codes.
You will need 12-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE
LED BULBS FOR EXTENDED USE This Fixture is Dry Rated
How to Install
- Decide the preferred hanging height and choose the correct number of rods needed.
- Feed the wires and safety cable through the rods,screw collar ring and canopy. Screw the rods together. Screw one end of the rod assembly onto the top of frame and the other end onto the swivel on the mounting strap.
- Place the mounting strap over the outlet box and mark the two points on the ceiling with same distance as between the two holes on the mounting strap.
- Drill the holes at the marked points and insert the plastic anchors into the holes.
- Raise the fixture up to the ceiling and wrap the safety cable around the mounting strap and secure with the locking device. When the wire connections are made, slip the canopy up along the rods and over the mounting strap. Secure with the screw collar ring.
- Install the bulb into the socket.
- Dress the glass as illustrated.
Glass Sets
- 61 pcs Various colored glass 2 3/4×7 3/4″
WARNING : This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Part Numbers
- A. (1)-Canopy,D 5 1/2XH1″ XBN312CHCAN5.5IN
- B. (1)-Collar ring
- C. (1)-Swivel
- D. (1) – 6″ Rod – XBN300CHROD6IN
- E. (3) – 12″ Rods – XBN300CHROD12IN
- F. (1)-Frame
- G. (61)-Glass,D2 3/4×H7 3/4″XBN300CHCLGLA7.75IN
MODEL ADD -312-CH-AU
Crystorama.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>