BEGA 67545.3 Table Lamp for Indoor Use Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 67545.3 Table Lamp for Indoor Use
Product Information
The product is a luminaire made of aluminium with a polished aluminium finish. It features hand-blown opal glass that has a satin matt appearance. The luminaire has a built-in toggle switch and uses a lampholder E27. The weight of the product is 2.0 kg.
The luminaire has a lamp luminaire efficiency of 82%. It can accommodate a lamp with a screw base E27, with a maximum output of 100 W. The product contains light sources of energy efficiency class E. Detailed technical and lighting data for the lamps can be found in the data sheets on the manufacturer’s website.
The product comes with spare parts, including spare glass, LED lamps in two different color temperatures (2700 K and 3000 K), and a lampholder push button.
Product Usage Instructions
- Insert the lamp into the lampholder, ensuring it is securely in place.
- Place the glass into the notches of the glass support, making sure it is centered.
- Connect the luminaire to a mains supply of 230 V.
- To turn the luminaire on or off, use the toggle switch located in the lamp base.
Note: The installation and operation of this luminaire should comply with national safety regulations. The manufacturer does not accept liability for any damage caused by improper use or installation. If any modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.
Instructions for use
Application
Table lamp · indoor luminaire made of metal base and hand-blown opal glass,
satin matt for free radiating and glare-free light.
Lamp
- Luminaire with screw base E 27
- Lamp output max. 100 W
- This product contains light sources of energy efficiency class E
- Supplied lamp
- BEGA LED lamp 13565
- LED 12 W · 1400 lm · 2700 K dimmable
- Supplied lamp
- BEGA LED lamp 13592
- LED 12 W · 1400 lm · 3000 K dimmable
- Luminaire efficiency: 82%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product description
- Luminaire made of Aluminium,
- finish Polished aluminium
- Hand-blown opal glass, satin matt
- Built-in toggle switch
- Black cable · 2m, with safety plug
- Lampholder E 27
- Safety class I
- c – Conformity mark
- Weight: 2.0 kg
Safety
The installation and operation of this luminaire are subject to national safety regulations. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
Insert lamp into lampholder. Place glass into the notches of the theglass support. Connect luminaire to mains supply (230 V). To turn the luminaire on or off use the toggle switch in the lamp base.
Relamping · Maintenance
Disconnect the electrical installation. Take off glass from luminaire housing.
Clean luminaire and glass. Use only solvent-free cleansers. Change the lamp.
Fix the glass.
Spares
- Spare glass 11 002 898 .0RG
- LED lamp 2700 K 13 565
- LED lamp 3000 K 13 592
- Lampholder 63 000 339
- Push buttom 63 000 421
BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>