KERBL IPCam 2.0 HD, 360 FHD Compact, 360 FHD Instruction Manual
- June 13, 2024
- KERBL
Table of Contents
KERBL IPCam 2.0 HD, 360 FHD Compact, 360 FHD
Product Information
- Product Name: [Product Name]
- Model Number: #10810, #10825, #10809
Features:
- OSD-Funktion (On Screen Display): Displays system name, date, time, and custom information on the screen.
- Mehrfachzugriff (Multiple Access): Allows up to 4 users to view the video simultaneously.
Note that the performance of the video may decrease when multiple users are connected to the camera.
Technical Specifications:
- Sichtwinkel (Viewing Angle): Dependent on the model
- Bildrate (Frame Rate): Dependent on the model
- Bitrate: Dependent on the model
- Infrarotmodus Nachtsicht (Infrared Night Vision):
Available with specific models
- Schwenkwinkel (Pan Angle): Dependent on the model
- Connectivity: 10/100 Mbps, RJ-45, Wi-Fi (IEEE802.11b/g/n)
- Storage: MicroSD Card up to 32 GB
- Power Supply: DC 12V / 1.0 A or DC 12V / 2.0 A depending on the model
- IP Rating: IP65 or IP66 depending on the model
- Included Accessories: Camera, Power Adapter, Wi-Fi Antenna, Network Cable, User Manual
- Warranty: 2 years
Product Usage Instructions:
-
Introduction:
Carefully read the user manual for proper usage and maintenance instructions. -
Camera Setup and Configuration:
- Connect the camera to the power adapter and ensure it is properly powered.
- Follow the instructions provided in the user manual to configure the camera for your specific requirements.
-
Operating the Camera:
- Use the provided software or application to access and control the camera.
- Refer to the user manual for detailed instructions on using the camera’s features, such as OSD Function, Multiple Access, and Video Options.
-
Wireless Setup:
- After successfully installing the camera, click on the corresponding symbol to access the camera.
- Follow the instructions provided in the user manual to set up the camera for wireless connection.
-
Other Settings:
- Update the firmware by tapping on “firmware upgrade” to check for new software versions.
- Use the options provided in the software or application to recover a forgotten password, register a new account, and manage other settings.
-
Additional Tips:
- Ensure all cameras are properly connected to the router using the RJ-45 network cable or configured correctly for wireless connection during initial installation.
- For simultaneous online access to all cameras, use the “Alles starten” option. Please refer to the user manual for more detailed instructions and troubleshooting tips.
Introduction
Please read these instructions carefully in their entirety before using the
product, and keep them handy for future reference.
Thank you for your interest in our product and for ordering the IPCam. It can
be controlled using any PC/laptop via the Intranet or Internet via a common
web browser (recommended: Internet Explorer or Safari), via smartphone
(iPhone, iPad, Android phone and pad) or via the client software installed on
the PC. It can be easily integrated into your LAN or WLAN environment via a
user-friendly installation process and intuitive interface. We are certain
that you will value the quality and features of this product.
Note
This product can interfere with other wireless devices that use the 2.4 GHz
ISM band. Please turn off these devices to avoid interference.
Product safety
This product transmits electromagnetic waves just like other wireless
products. Its signal power, however, is less than other wireless devices, for
example, mobile phones. During operation, IPCam meets the safety standards for
radio frequencies and the recommended indices.
Restrictions
- Do NOT use this product to violate the privacy rights of others. Monitoring the activities of other people wi-thout their consent is unlawful. This product was not designed or manufactured for this purpose.
- Do NOT place this product in proximity to medical devices. Radio waves can cause the malfunction of electronic medical devices.
- This product should be kept at least 30 cm away from all pacemakers. Radio waves can interfere with pacemakers.
- Do NOT use this product for unlawful activities. The user must ensure that the camera is only used in ac-cordance with the law.
Care and maintenance
- Make sure that the camera and its power supply has sufficient ventilation;
- Do not shake, hit or allow the product to fall to the ground;
- Make sure that the camera remains dry and dust-free, and is not exposed to direct sunlight;
- Do not place this product in proximity to magnetic objects;
- Do not place the product in locations that have constant temperature or humidity fluctuations;
- Keep the product away from heat sources;
- Do not use this product in proximity to aggressive chemicals;
- Do not place this product in rooms that are surrounded by metal. The surrounding metal can shield electromagnetic waves so that no signal is received;
- Please note the local environmental protection regulations of your area;
- Please turn the device off when not in use;
- Do not take the product apart and do not attempt to repair it. This can damage the product.
Main features
Easy installation
The camera comes with an integrated wireless capability (IEEE802.11b/g/n) and
web server function. Therefore, dri-ver installation is not necessary. Thanks
to P2P technology (peer-to-peer), the user can view the IPCam stream easily
via a PC/smartphone/client software by simply entering the UID/password. The
camera can automatically speak to the router via the network cable or WLAN.
You can see images picked up by the camera as soon as the connec-tion is made.
802.11 b/g/n WLAN connection available
The camera was designed to work with both wired net-works as well as standard
802.11 b/g/n wireless networks. The camera has SSID filtering, powerful 64/128
bit encryp-tion and the latest security standard for WPA encryption in order
to protect against illegal access.
3GPP mobile surveillance
The camera allows you to view images on your mobile phone as a live video
stream. It supports the telecommunication standard for the 3GPP streaming
format. All 3G-enabled mobile devices are compatible. This means that the
images can be viewed via your mobile phone‘s browser.
Simultaneous high-speed MPEG-4 and Motion JPEG The camera enables the
simultaneous live streaming of MPEG-4 and Motion JPEG. The camera has
H.264/MPEG4 compression that compresses the video to make the trans-mission
faster and more efficient. The H.264/MPEG4 and MJPEG image can be transmitted
at 30 frames per second.
Simultaneous HTTP and RTSP streaming
The camera supports the HTTP and RTSP/RTP/RTCP proto-col and supplies several
HTTP and RTSP streams simultaneously.
Snapshot and record function
You can take a snapshot from the images sent to your PC by the camera and then
save the image in JPG or BMP format. In addition, you can also record the
video stream sent from the camera to your PC and save it in ASF format.
-
Motion sensor function
The camera can detect changes to the image being view-ed. As soon as there is a change, the selected actions are run by the software. You can find the camera’s options in the user software menu. -
OSD function
The OSD function (on screen display) can show the system name, date and time, and user-defined info on the screen. -
Authentication
You must enter your user ID and password in the authentication window. The password prevents unregistered users access to your camera. -
Multiple access
The camera enables access for up to 4 users simultaneously. Please note that the output of moving images can decrease as more users connect to the camera simul-taneously. -
Infrared night vision
The camera uses infrared LEDs. When the environment is dark, the LEDs activate automatically via a light sensor. The video switches from colour to black & white. The range is approx. 11 m. It is possible to switch the LED ope-ration from “auto” to “manual”. -
Adapter
When using the power adapter, make sure that the nomi-nal voltage matches that of the device to avoid damage due to incorrect use of the power supply.
PC system requirements
The PC and network must meet the following technological specifications in
order for the camera to function.
- Processor: Intel Pentium III, 1GHz or higher (Pentium IV, 2 GHz or higher recommended)
- RAM: 256 MB or more
- Colour monitor: We recommend at least 800 x 600 and the latest driver for the display adapter
Operating system: Microsoft Windows 98 / Windows ME / Windows 2000 / Windows XP / Windows Vista / Windows 7 / Windows 8 / Windows 10 Web browser: Internet Explorer Version 5.0 or higher, DirectX 9.0c or higher, Safari, Firefox (requires QuickTime), Google Chrome (requires QuickTime) Network protocol: TCP/IP network protocol installed Interface: 10/100 Mbps Ethernet connection or wireless network connection (WLAN)
Technical data | #10810 | #10825 | #10809 |
---|---|---|---|
Transmission frequency | 2.4 GHz | 2.4 GHz | 2.4 GHz |
Transmission power | 50 mW | 50 mW | 50 mW |
Image sensor | 1/4“ Progressive CMOS sensor | 1/2.7“ Progressive CMOS sensor |
1/2.7“ Progressive CMOS sensor
Display resolution| 1280 x 720p| 1920 x 1080p| 1920 x 1080p
Lens| 3,6 mm| 2.8 mm, F1.4| 2.8 ~ 12 mm, F1.4 electronic optical Zoom + Focus
Viewing angle| |
- Horizontal: 51 °,
- Vertical: 94 °,
|
- Horizontal: 31 ~ 103 °,.-
- Vertical: 23 ~ 74 °,
min. Illumination| 1.0 Lux / F1.2|
- 0.8 Lux / F1.4 (color mode)
- 0.3 Lux / F1.4 (b/w mode)
|
- 0.5 Lux / F1.4 (color mode)
- 0.1 Lux / F1.4 (b/w mode)
Video
Image compression| H.264, MJPEG/JPEG
Image resolution|
- HD 720p (1280x720p-
- VGA (640x480p)
- QVGA (320x240p)
|
- FHD 1080p (1920 x 1080p)
- HD 720p (1280x720p)
- VGA (640x480p)
- QVGA (320x240p)
|
- FHD 1080p (1920 x 1080p)
- HD 720p (1280x720p)
- VGA (640x480p)
- QVGA (320x240p)
Frame rate| HD/VGA/QVGA 15 BpS| FHD/VGA/QVGA 0-15 FpS| FHD/VGA/QVGA 0-15 FpS
Bit rate| CBR/VBR, output range: 32 Kbps ~ 40 Mbps
Infrared mode| Automatic/Dual Filter
Night vision| 30 IR LEDs,
IR distance ca. 15 m
| 6 IR LEDs,
IR distance ca. 30 m
| 6 IR LEDs,
IR distance ca. 30 m
Network
Network
Ethernet 10/100 Mbps, RJ-45
Supported protocols TCP/IP, HTTP, RTSP, TCP, UDP, SMTP, FTP, DHCP, DNS, DDNS,
NTP, UPnP, P2P, etc.
Wireless standard: Wi-Fi (IEEE802.11b/g/n)
Support IP address static, dynamic max. number concurrent 4
Hardware Interface
Storage| Micro SD Card 32 GB
Power supply| DC 12V/1.0 A| DC 12 V/2.0 A| DC 12 V/2.0 A
Power consumption, typical| –|
- 4.68 W (IR LED turned on)
- max: 9.48 W (P&T turned on)
|
- 6.72 W (IR LED turned on)
- max: 16.32 W (P&T turned on)
Pan/Tilt angle| –|
- Horizontal: 355
- Vertical: 95°
|
- Horizontal: 355
- Vertical: 90°
Others
Waterproof level| IP65| IP66| IP66
Operating temperature| -20 ~ 50 °C
Operating humidity| 10 ~ 80 %
Weight| –| 1200 g| 1200 g
Accessory| Camera, power adapter, Wi-Fi antenna, network cable, user manual
Warranty| 2 years
Camera setup and configuration
-
Connecting the camera to the network
When using for the first time, please connect the camera and the computer to a router using network cables.
Ensure the router is switched on. Only use the cable supplied to provide power to the camera so as to avoid damaging the device!
The camera can be returned to the factory settings by pressing the „Reset“ button (for at least 10 seconds). The “Reset” button is at the end of the 3-way cable (next to the LAN or adapter cable jack). -
Connect the camera with an Android / iOS device (smartphone, tablet, etc.)
Software download
The software needed (Eye Cloud) can be downloaded via the AppStore/Google Play
or via the website: www.kerbl.com/service/downloads/ip-camera-
apps
Registration
Register as detailed in the instructions contained in the application with
your e-mail address and password
Add a camera with the software from the App store
Note: The user interface can look different in newer versions of the
application. Please contact our support team if required.
Click „+“ at the top right to add a new camera, and select „IP Camera“. There
are three options for choosing a camera:
LAN search: Click „Search“ to find the camera on the network. The default
password is 888888 and the user-name is admin. Change these details as soon as
you find the camera in order to protect your privacy as effectively as
possible
Scan: Click „Scan“ and allow your smartphone to scan the QR code. If you
hear a beep, the code has been scan-ned in and the unique camera number (UID)
appears in the relevant field.
Manual entry of the UID code: You can also enter the UID manually. Please note
that the entry is case-sensitive.
Once you have successfully installed the camera, click the relevant icon and
the camera appears.
Video options
- Snapshot
- Record
- Listen (no function)
- Talkback (no function)
- Horz Cruise
- Vertical Cruise
- Horizontal
- Vert Mirror
- Night Vision
- Preset Cruise
WLAN setup
Click the „House“ icon at the top left and the main menu appears. Clicking
„Device Management“ gives you a list of all the cameras that have been
installed on the network via LAN cable.
Click the „>“ symbol on the right next to the camera to activate the settings.
Click the blue „WiFi“ icon to display the WLAN networks available.
Choose a router and enter the password (WPA or WPA2). Once you have confirmed
this by clicking the „OK“ sym-bol, the WLAN network is set up.
Now disconnect the camera from the RJ-45 cable.
The camera will dial in and connect automatically to your network.
Add a camera with the software from the Google Playstore
- Note: The user interface can look different in newer versions of the application. Please contact our support team if required.
- Scan: Click „Scan“ and allow your smartphone to scan the QR code. If you hear a beep, the code has been scan-ned in and the unique camera number (UID) appears in the relevant field.
- LAN search: Click „Search“ to find the camera on the network. The default password is 888888 and the user-name is admin. Change these details as soon as you find the camera in order to protect your privacy as effectively as possible
- Manual entry of the UID code: You can also enter the UID manually. Please note that the entry is case-sensitive.
Once you have successfully installed the camera, click the relevant icon and the camera appears.
Video options
- Horizontal cruise
- Vertical cruise
- Preset position
- Full screen
- Sound off (no function)
- Sound on (no function)
- No communication (no function)
- Communication (no function)
- Snapshot
- Record
The application supports settings for the alarm, saving, password changes, firmware updates, image quality (brightness, contrast, mirroring, infra-red options). The commands are self-explanatory thanks to the icons and are easy to understand.
WLAN setup
Click the symbol on the right next to the camera to activa-te the settings.
Click „Setting“ and „WiFi Setting“. The available WLAN routers are listed.
Choose a router and enter the password (WPA or WPA2). Once you have confirmed
this by clicking the „OK“ symbol, the WLAN network is set up. Now disconnect
the camera from the RJ-45 cable. The camera will dial in and connect automati-
cally to your network.
Other settings
Delete camera: Select the camera and sliding it with the finger on the
touchpad to the left causes „Delete“ to ap-pear. Tap it and the camera is
deleted.
Reset to factory settings: Hold the reset button for around 15 seconds.
- Video history: Tapping „history records“ allows you to list videos that have been stored locally and on the SD card.
- Version update: Tapping „Firmware upgrade“ searches for new versions of the software.
Camera setup via PC software
Proceed in the same way as with downloading for smart-phones and go to the
www.kerbl.de/service website. Click „Download“
under the Windows icon.
Run the „app-Smart.exe“ file and allow the program to install. The following
icon appears on your desktop following successful installation:
Note: The user interface can look different in newer versions of the
application. Please contact our support team if required.
Tip: We have created a video tutorial for you. This ex-plains all the
program details in detail. Click the link: www.kerbl.com/service/product-
consulting/ip-camera/video-tutorial-ip-cameras
After double-clicking the icon, the following window appears:
-
Recover: Forgotten password and request a new one Register: New registration (tip: Use your e-mail address as the account)
After entering the details successfully, the program inter-face appears. Pressing „+“ allows you to add cameras. -
Name: Assign a unique name so that you know which ca-mera you want to control if you have multiple cameras.
-
UID: Here, you can either enter the camera‘s unique code that can be found on a separate sticker or click „Search“. All of the cameras on the network are displayed (see Setup via smartphone).
Click „Refresh“ if not all of the cameras on the network are listed. Check during initial installation that all of the cameras are connected with the RJ-45 network cable to the router or that the cameras were linked correctly to the WLAN. -
Password: For security reasons, change your password promptly and follow the instructions under „Changing passwords“
Select WiFi: Clicking this button allows you to list the WiFi networks
available with a click on „Find signal“. Select the appropriate network, click
„Set“ and enter, if requested, the WPA or WPA2 key. This is often found on the
underside of the router. After successfully setting up the WLAN network, the
following message appears
Confirm with „OK“. The camera is now successfully set up! Now disconnect the
camera from the RJ-45 cable. The camera will dial in and connect automatically
to your network.
Operating the camera
Start all: Bring all cameras online simultaneously
Stop all: Take all cameras offline simultaneously Options: Settings for
memory functions, on-screen display and other details Video: Access to saved
videos
Alarm: Access to videos that were triggered due to an alarm
Settings: Change password, search for software updates
Control elements
Clicking with the left-hand mouse button on the window of the camera in
question displays a control element with various control options:
The control options framed in red only apply to IPCam 360 FHD/FHD Compact
(#10825, #10809).
These functions relate to the movement of the camera via remote control.
The explanation of the function can be made to appear by briefly holding the
mouse point over the icon.
The menu is clear and self-explanatory.
Further information and assistance in the event of installation problems can be obtained here:
- Tel: +49 8086 933-545
- E-Mail: support_ipcam@kerbl.com
- Tip: We have created a video tutorial for you. This explains all the program details in detail. Click the link: www.kerbl.com/service/product-consulting/ip-camera/video-tutorial-ip-cameras
Warranty card
Based on our General Terms and Conditions of Business, we offer a 2 YEARS WAR-
RANTY for this device covering damage caused by material or manufacturing
defects. This warranty begins on the date of purchase.
The warranty does not cover:
- Damaged caused by natural wear and tear (wear parts, sliding parts), excessive strain and incorrect use (non-compliance with operating instructions).
- Damage caused by force majeure or sustained during transport.
- Damage to rubber parts, e.g. on connecting lines. Warranty repairs are only carried out by the manufacturing plant or an authorized contracted workshop. The manufacturer reserves the right to reject any warranty claims in the event of non-compliance.
The device must for this purpose be returned to the point of sale, at the risk of the device owner, complete, packaged and with sufficient postage, including the original invoice and the warranty card. (address see dealer stamp). Please provide as much information as possible on the nature of the problem. Costs incurred as a result of unjustified defect claims will be invoiced to the device’s owner.
CE Declaration of Conformity
Albert Kerbl GmbH hereby declares that the IPCam´s #10809, #10810 and #10825
comply with the 2014/53/EU Directive. The full text of the
EU Declaration of Conformity can be found on the following website: http://www.kerbl.com/doc
Electrical waste
It is up to the operator to dispose of the IPCam responsibly in accordance
with local regulations. Consult the relevant regulations for your country. The
device must not be disposed of in household waste. Under the terms of the EU
Directive on the disposal of old electrical and electronic equipment, the
device can be taken to local authority-run refuse sites or recycling plants
free of charge, or returned to dealers who offer a returns service. Correct
disposal protects the environment and prevents any possible harmful impacts on
humans and the environment.
Albert Kerbl GmbH
Felizenzell 9
84428 Buchbach, Germany
Tel. +49 8086 933 – 100
Fax +49 8086 933 – 500
info@kerbl.de
www.kerbl.de
Kerbl Austria Handels GmbH
Wirtschaftspark 1
9130 Poggersdorf
Tel. +43 4224 81555
Fax. +43 4224 81555-629
order@kerbl-austria.at
www.kerbl-austria.at
Kerbl France Sarl
3 rue Henri Rouby, B.P 46 Soultz 68501 Guebwiller Cedex, France Tel. : +33 3
89 62 15 00
Fax : +33 3 89 83 04 46
info@kerbl-france.com
www.kerbl-france.com
References
- Home - www.austria.at
- Everything around animal breeding, husbandry and agricultural supplies - Albert Kerbl GmbH
- Page d'accueil - Kerbl France
- Declaration of conformity - Albert Kerbl GmbH
- Important direct dials - Albert Kerbl GmbH
- Downloads IP camera - Albert Kerbl GmbH
- Product consulting - Albert Kerbl GmbH
- Expert advice on cameras and IP cameras - Albert Kerbl GmbH
- Everything around animal breeding, husbandry and agricultural supplies - Albert Kerbl GmbH
- Zentrale Durchwahlen - Albert Kerbl GmbH
- Important direct dials - Albert Kerbl GmbH
- Downloads IP-Kamera - Albert Kerbl GmbH
- Videocamera per stalle IPCam 360 FHD
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>