HYUNDAI VK 688B Electric Kettle Instruction Manual

: June 5, 2024
: HYUNDAI

Table of Contents

HYUNDAI VK 688B Electric Kettle
General Safety Instructions
Instructions for Use
Cleaning and Maintenance
Troubleshooting
Technical specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HYUNDAI VK 688B Electric Kettle

HYUNDAI-VK-688B-Electric-Kettle-product

Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep the instructions including the war-ranty, the receipt and, if possible, the box with the internal packing.

General Safety Instructions

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
Do not leave the appliance plugged in power supply without supervision!
If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.
Never use the appliance if its power cord or plug is damaged, if it does not work properly, if it fell down and was damaged and it is leaking. In this case take the appliance to a special service to check its safety and proper function.
The appliance is designed exclusively for private use and for the envisaged purpose.
This appliance is not fit for commercial use.
Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. Do not put it in water.
When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.
Do not operate the machine without supervision. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).
To protect children from the dangers posed by electrical appliances, make sure that the cable is hanging low and that children do not have access to the appliance.
Use only original spare parts.
Pay careful attention to the following “Special Safety Instructions for this unit“.

Special safety instructions for this unit

Before using it for the first time, check whether the voltage rating on the product corresponds to the voltage of your home electric current.
Use the kettle only for its intended use as described in this instruction.
This appliance is not for commercial or industrial use.
To protect against the risk of electric shock, do not immerse the product or its cord in water or any other liquids.
The kettle should not be placed on an untreated wood surface. Place the product on heat-resistant flat and dry surfaces only.
Place the kettle where it can’t fall or be pulled into the water or any other liquids. If the appliance falls into water, unplug it immediately. Do not use it. Take it to an authorized service center.
Do not place the unit underneath any wall cupboards or hanging objects, nor directly by a wall or in a corner.
Close supervision is necessary for any appliance being used by or near children or disabled people.
Do not leave the kettle unattended while connected.
Let the kettle cool down completely before cleaning or storing.
Unplug the unit when not in use, before filling in /pouring out water, moving from one location to another or before cleaning.
Do not allow the cord or the product itself to touch hot surface and make sure it is placed in such a way that the unit cannot accidentally be upset by anyone pulling the power cord.
Do not operate the product with the damaged cord or plug. Never try to repair on your own. Cord or plug replacement should be done in an authorized service center only.
Do not operate the kettle if it has been dropped or damaged. Take it to an authorized service center for examination and repair.
Never disassemble the product; incorrect reassembly can increase the risk of electric shock when the kettle is used. All repair work should be carried out only by an authorized service center.
Do not use the kettle without filter.
Do not use the appliance outdoors.
The appliances are not intended to be operated by means of an external timer or separate remote-control system.

Important!

As there is the risk of burns, always close the lid and lock it properly when you are going to turn the kettle on. Never open the lid while hot water is inside and /or the steam density is too high.
The lid or outer surface may get hot when the appliance is operating. The temperature of accessible surface may be high when the appliance is operating.
Before switching on the kettle ensure that the water level is between MIN and MAX marks only.
There is a cut-off device that works if the kettle is overheated. It switches the kettle off when there is no water inside or the water level is too low. Wait until the kettle cools down completely to start boiling after the cut-off device was activated. The kettle will not turn on while too hot. Before switching on the kettle always check that there is water inside the kettle and the water level is not too low.
Fill the kettle with cold water only.
Switch the kettle off before removing it from the base.
the kettle must be used only with the base provided.
If the kettle is overfilled, boiling water may be ejected. Don´t overload above the MAX mark on the kettle!

Description of the controls

P1 ON/Off switch
P2 ON/OFF indicator light
P3 Water level scale
P4 Lid
P5 Button for open hinged lid
P6 Multi-directional base

Instructions for Use

Before you start:
Before you use your new kettle for the first time, please, boil water and pour it away. The same should be repeated more times to get rid of the unpleasant plastic taste, which is usual for plastic products. If the boiled water tastes still like a plastic, please, repeat the same process until the unpleasant taste is not present anymore.
If the result of boiling process is still negative, please, contact the service point.

Unwind sufficient cord from the storage area to reach the power outlet. Then place the po-wer base on a dry, flat surface.
Open the lid and fill the kettle with cold water.
Make sure that the water level is between the minimum and maximum marks on the water level scale. Do not switch on the kettle when empty.
Check and correct the filter’s position before boiling the water. The automatic shutt off switch may not work properly without the filter.
Close the lid and place the kettle back on the base.
Plug to AC outlet with the voltage corresponding to the information on the product label.
Switch the kettle on by the main switch. The indicator light will go on showing that the water is being boiled.
When the water has boiled, the kettle will switch off automatically.
Do not remove the kettle from the power base without first switching off.
Remember if you wish to re-boil, put the main switch of the kettle to the “ON” position.
The kettle may be switched off at any time by either pushing the main sitch of the kettle to the OFF position.
When water boils, the steam passes through the steam channel and then switches off the kettle. To pour water, lift the kettle from the power base and pour.
When pouring out the water incline the kettle slightly and gradually. Do not forget that hot water is inside.
An automatic safety boil-dry cut-out has been fitted for protection against overheating: It will also operate if the kettle is switched on when containing insufficient water. Always ensure the water inside the ketle covers the minimum mark on the water level indicator gauge. If the cut-out has operated, switch the kettle off, disconnect from the power outlet and allow the kettle to cool down for 5 to 10 minutes. Then refill with enough water and switch on; the kettle will then boil and cut off as in normal operation.

Cleaning and Maintenance

Unplug the kettle and wait until it cools down completely before cleaning or storing.
To avoid the risk of electric shock, do not clean the exterior of the unit, its base or its power cord with water, and do not immerse it in water. The exterior of the kettle may be cleaned with a slightly damp non-abrasive lint-free cloth without additives.
The filter may be removed for cleaning purposes. To do this, place the filter vertically, pull upwards and draw out. Wash the outside of the filter in the water flow.
Refit all parts when they are completely dry.
In the hard water area, it is important to do the decalcification regularly to keep the kettle in good working condition, because too much scale inside may cause the kettle fail to work. For the best performance of your kettle, decalcify the unit from time to time. The frequency depends on the hardness of your tap water and how many times you have used the kettle. Decalcification will clean the interior of the unit.

This may be done in the following manner:

Half fill the kettle with ordinary tap water.
Add 30 ml of white vinegar to the water in the kettle.
Boil the mixture and allow it to stand for 30 seconds.
Repeat this process two or three. Empty, rise well and use the kettle in the normal way.

Troubleshooting

The device is not working

Check that the mains connection cable is firmly plugged in.
Check the right possitions of the kettle on the base.
Check the positions of the switches.

Technical specifications

Electric kettle
,7 l capacity
Cordless – removable from the stand
Stainless steel concealed heating element
Rotatable 360°
Automatic switch off
Overheating protection
Boil-dry protection
Water level indicator
On/off switch and light indicator
Color: blue (B), green (G), orange (O) purple (P), red (R), yellow (Y)
Power supply: 230 V ~ 50 Hz
Power drain: 2000 W
Size: 22 x 24 x 16,5 cm
Weight: 0,88 kg

We reserve the right to change technical specifications.

WARNING: Do not use this product near water, in wet areas to avoid fire or injury of electric current. Always turn off the product when you don’t use it or before a revision. There aren’t any parts in this appliance that are reparable by consumers. Always appeal to a qualified authorized service. The product is under dangerous tension.

Old electrical appliances, used batteries, and accumulators disposal

This symbol appears on the product, on the product accessories or on the pro- duct packing means that the product must not be disposed of as household waste. When the product/ battery durability is over, please, deliver the product or battery (if it is enclosed) to the respective collection point, where the electrical appliances or batteries will be recycled. The places, where the used electrical appliances are collected, exist in the European Union and in other European countries as well. By proper disposal of the product, you can prevent possible negative impacts on the environment and human health, which might otherwise occur as a consequence of improper manipulation with the product or battery/ accumulator. Recycling of materials contributes to the protection of natural resources. Therefore, please, do not throw the old electrical appliances and batteries/ accumulators in the household waste. Information, about where it is possible to leave the old electrical appliances for free, is provided at your local authority, at the store where you have bought the product. Information, where you can leave the batteries and accumulators for free, is provided to you at the store, at your local authority