KERBL 80557 Drinking Fountain Instruction Manual

: October 30, 2023
: KERBL

Table of Contents

KERBL 80557 Drinking Fountain
Product Information
Product Usage Instructions
Safety instructions
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KERBL 80557 Drinking Fountain

KERBL-80557-Drinking-Fountain-PRODUCT

Product Information

The product is a drinking fountain with model number #80557. It has a capacity of 1.6 liters and operates on a DC 5V/95 mA USB power supply. The product is compliant with the CE/UKCA directives and regulations of the European Union or relevant UK legislation.

Product Usage Instructions

Before using the drinking fountain, it is essential to read and follow the safety instructions mentioned in the user manual. Failure to comply with the instructions may result in electric shock, fire, and/or injury.

Connect the USB power supply to the drinking fountain.
Fill the drinking fountain with water up to the maximum capacity of 1.6 liters.
Switch on the drinking fountain by pressing the power button.
The drinking fountain will start dispensing water.
Ensure that the water level does not go below the minimum level.
When not in use, switch off the drinking fountain and unplug it from the USB power supply.

It is recommended to clean the drinking fountain regularly to maintain hygiene. Follow the cleaning instructions provided in the user manual.

Note: The product should only be passed on to other people with the instructions for use.

Safety instructions

IMPORTANT! All instructions must be read. Failure to comply with the instructions below may cause electric shock, fire and/or serious injury. Keep these instructions handy for future reference! Only pass on the product to other people with the instructions for use.

The product’s housing can become hot during operation. Ensure adequate ventilation of the product to dissipate the heat.
Check the product for damage before using it for the first time.
Any defects or damage must be resolved immediately to ensure safe operation.
Disconnect the power supply before working on the product.
At regular intervals, check the charge cable for damage. If damaged, replace the charge cable with the original charge cable from the manufacturer.
Only use the charging cable supplied with an appropriate power pack for operation. The power pack must be designed for at least 1 A and should correspond to the SELV output voltage as marked on the device.
Fill the drinking fountain only up to the max. indicated filling level.

Technical data

USB Power Supply DC 5 V / 95 mA
Capacity 1,6 l

CE-/UKCA-conformity declaration
Albert KERBL GmbH hereby declares that the product/device described in these instructions complies with the fundamental requirements and other relevant stipulations and regulations. The CE-/UCKA-mark confirms compliance with the Directives of the European Union or the relevant UK legislation.

Electronic scrap
Disposing of this device after its service life is the responsibility of the operator. Please consult the valid national regulations. The device must not be disposed of in the household waste. In accordance with the stipulations of the EU Directive on the Disposal of Electrical and Electronic Devices, the device can be disposed of free of charge at the local waste collection or recycling center. Alternatively, it can be returned to retailers who offer a collection service. Proper disposal helps to ensure environmental protection and prevents any adverse effects on human health and the environment.