KERBL 345605 Mobile LED Battery Spotlight WorkFire Pro Instruction Manual

KERBL 345605 Mobile LED Battery Spotlight WorkFire Pro Instruction Manual

Intended use

The LED floodlight is intended for indoor and outdoor use. Do not move the product during use. The LED floodlight is not suitable for purposes other than those described here.

Safety precautions

CAUTION! Read all instructions. Failure to heed the following instructions may lead to electric shock, fire and/or serious injury. Safe this user manual for future reference! Include this user manual should you give the LED floodlight to other persons.

• The LED floodlight’s housing may become very hot during use. Make sure the floodlight is sufficiently ventilated to promote the dissipation of generated heat.
• Touch the floodlight with your bare hands only when it is cooled down.
• Set up the floodlight with sufficient clearance to flammable surfaces and objects. If you set up the floodlight near flammable objects, keep a minimum distance of 1 m from the housing.
• Make sure there is at least 1 m clearance between the LED floodlight and the objects you wish to illuminate.
• Make sure that the connection cable is not taut or in contact with sharp objects, chemicals or solvents.
• Check the product for damages before first use.
• Resolve any malfunctions and repair any damages immediately to guarantee safe operation.
• Interrupt the power supply before repairing the LED floodlight.
• The safety glass is non-replaceable. Dispose of the product if the safety glass is damaged.
• The floodlight may be set up on an even and stable surface only.
• Risk of electric shock! The product is splashproof (IP54), still do not place near water or other liquids, or at locations where water or other liquids may collect. Do not immerse the product in water. Keep a minimum distance of at least 5 meters from swimming pools or ponds. Shield the power plug from moisture.
• Regularly check the power plug and connection cable for damages. If the product’s connection cable is damaged, replace it with a special connection cable available from the manufacturer or customer service.

Charging the built-in battery

• To retain full battery capacity, we recommend charging the battery for 6 hours approx. before first use (or after an extended period of disuse).
• The connection cable complies with protection class IP44 (splashproof). Connect the connection cable to a power outlet (protection class IP44 or above) for exterior use.
• After charging, place on the cap (6) to guarantee splashproof operation.

Setup

• Adjusting the floodlight position: Loosen the fastening screws (3). Adjust the desired inclination.
  Re-tighten the fastening screws (3) (see detailed image).

• Before use, make sure the product is stable. You may also hang the product using the hook (1).

• Connect the power plug (4) to a suitable power outlet.

• Turning the product on/off: Press the on/off switch (5).

Operation

Cleaning

• Interrupt the power supply before repairing or cleaning the LED floodlight.
• Use a slightly damp cloth to clean the LED floodlight’s housing. Do not use any aggressive cleaning agents.

Specifications

Output: 20 W
Light flux: 1,600 lumen
Luminous efficacy: 80 lm/W
Angle: 100 °
Chip service life (L70): > 35,000
Input voltage: 220 – 240 V / 50 Hz
Colour temperature: 6,000 K
Colour rendering (CRI): Ra > 80
Protection type: IP 54
Dimensions (L x W x H): ca. 23 x 16 x 6 cm

CE Mark / CE Declaration of Conformity

Albert KERBL GmbH hereby declares that the product / device described in these instructions complies with the fundamental requirements and other relevant stipulations and regulations. The CE mark confirms compliance with the Directives of the European Union.

Electrical waste

It is up to the operator to dispose of the device responsibly after its useful life in accordance with local regulations. Consult the relevant regulations for your country. The device must not be disposed of in household waste. Under the terms of the EU Directive on the disposal of old electrical and electronic equipment, the device can be taken to local authority-run refuse sites or recycling plants free of charge, or returned to dealers who offer a returns service. Correct disposal protects the environment and prevents any possible harmful impacts on humans and the environment.

Albert Kerbl GmbH
Felizenzell 9
84428 Buchbach, Germany
Tel. +49 8086 933 – 100
Fax +49 8086 933 – 500
www.kerbl.de

Kerbl Austria Handels GmbH
Wirtschaftspark 1
9130 Poggersdorf
Tel. +43 4224 81555
Fax. +43 4224 81555-629
www.kerbl-austria.at

Kerbl France Sarl
3 rue Henri Rouby, B.P 46 Soultz
68501 Guebwiller Cedex, France
Tel. : +33 3 89 62 15 00
Fax : +33 3 89 83 04 46
www.kerbl-france.com

References

• Everything around animal breeding, husbandry and agricultural supplies - Albert Kerbl GmbH
• Page d'accueil - Kerbl France
• Everything around animal breeding, husbandry and agricultural supplies - Albert Kerbl GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>