KERBL 297424 ProNit Plus Instruction Manual
- October 27, 2023
- KERBL
Table of Contents
KERBL 297424 ProNit Plus
ProNit Plus
| ref.no. | size |
|---|---|
| 297421 | 7 / S |
| 297422 | 8 / M |
| 297423 | 9 / L |
| 297424 | 10 / XL |
| 297425 | 11 / XXL |
As the gloves are adjusted to special purposes, the lengths may deviate from the requirements of EN 420:2003+A1:2009.
EU type examination carried out by: –
SATRA Technology Centre Ltd,
Wyndham Way Telford Way, Kettering,
Northamptonshire, NN16 8SD,
Results of the EN 388:2016+A1:2018 mechanical test
- Abrasion resistance: 3 (min 0 / max 4)
- Blade cut resistance (Coupe – Test): 1 (min 0 / max 5)
- Tear resistance: 1 (min 0 / max 4)
- Puncture resistance: 1 (min 0 / max 4)
- Blade cut resistance (TDM): X (min A / max F)
The sign X, instead of a number, means that the glove is not designed for the use covered by the corresponding test. Results exclusively from samples of the inner hand of the glove
Care and Cleaning: The service stages mentioned are based on tests which were carried out exclusively on unused gloves. Transfer of the results on gloves after care treatment is not possible. The manufacturer accepts no liability for changes to the properties. For donning, check the integrity of the glove and the picked size fits the hand. For doffing, ease the glove of one hand before removing the second glove to reduce the risk of contamination.
Packaging and storage: This article is supplied in uniform sales
packaging made from recyclable cardboard. PE-bags or similar environ-mentally
friendly coverings are the smallest packaging unit. The gloves must be stored
correctly, i.e. in boxes in dry rooms. The properties can be altered by
influences such as humidity, temperature, and light, as well as natural
alterations to the materials over a period of time.
Ageing: It is not possible to give an expiry date, as this can be dependent on the degree of wear, use, and the area in which the gloves are used.
General information / Risk assessment: The glove types named here meet with the requirements of regulation (EU) 2016/425 and regulation 2016/425 also brought into UK law and amended and is compliant with the above mentioned harmonized/designated standards EN 420:2003+A1:2009, EN388:2016+A1:2018. While selecting an equipment, user should perform risk analysis based on the intended use and determine the suitability based on product’s test standards and protection levels obtained. Laboratory tests offer an aid to selection, however they cannot take the actual workplace conditions into account. It is therefore the responsibility of the user and not the manufacturer to test the suitability of a certain glove for the planned area of use. Gloves for general light handling in wet conditions. The equipment provides protection against moderate mechanical risks. The maximum wear time depends on the activity being carried out and the person. The glove offers no protection against perforation with sharp objects, e.g. injection needles. No gloves should be worn if there is a risk of becoming caught in moving machine parts.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>