VO20 Baseus Portable Wireless Speaker User Manual
- June 16, 2024
- Baseus
Table of Contents
VO20 Baseus Portable Wireless Speaker User Manual
Before using the product, thoroughly read this manual. Keep the manual for future reference.
Pairing
-
Power-on When powering on the device for the first time, long press the multifunction key switch for 2 seconds to power it on. The multifunction key indicator and ambient light will flash, and the device enters the wireless pairing mode.
-
Wireless connection
Turn on the wireless function of the mobile phone to enter the search and pairing state. Select the device model: Baseus AeQur VO20 Subsequent use of the speaker will automatically reconnect to the last device used. During reconnection, the multifunction key indicator and ambient light will flash. -
Download the app and log in
-
Power-off
Long press the Power button for 3s to turn off the speaker.
Instructions
Music mode:
Play/Pause: Tap the Multifunction button.
Previous: Tap and hold the Volume-button for 1,5s. +)
Next: Tap and hold the Volume+ button for 1,5s.
Decrease volume: Tap the Volume-button.
Increase volume: Tap the Volume+ button.
EQ switching: Tap the EQ button
Sequence: Normal>Outdoor Mode> Vocal Mode
Note: After 40 minutes of no audio output in the connected state, the
speaker will enter sleep mode.
Call mode:
Answer/Release a call: Tap the Multifunction button.
Reject a call: Double-press the multifunction button.
Light control:
Long press the Light button to turn on/off the lights.
Tap the Light button to switch light effects (default RGB breathing cycle –
solid blue – solid purple – solid orange – smart lighting effect, cyclically
switching between five light effects). Light effects can be customized and set
within the app.
TWS Pairing:
- Turn off Bluetooth on your phone, triple-press the EQ button. The RGB light will stay white to enter TWS pairing mode. Once successfully paired, the Multifunction button indicator and the RGB blue light will flash simultaneously, indicating that it is ready to be connected to your phone.
- Triple-press the EQ button to unpair from TWS.
Note: The speaker has a memory function for pairing, and to unlink, you need to press the multifunction key five times to restore factory settings.
Reset to factory settings:
While the device is powered on, press the multifuction button 5 times.
Power indicator: While charging, the Multifunction button indicator light will be pulsing blue. Once fully charged, the blue light will stay on.
Warnings
Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
-
This product contains battery inside. Please avoid exposing the product to the sunlight, electric heater or similar overheating environments.
-
Do not store the product in high temperature, strong light and strong magnetic places.
-
Do not keep it in other harsh environments such as nearby the fire source. Intense physical actions such as knocking, throwing, trampling on squeezing, or putting into fire shall be avoided. Do not use it in case of expansion.
-
The ambient temperature of product is 0-45°C. 4. Inappropriate use of the product against this user manual or ignoring warnings can easily cause damage to the product or may endanger personal and property safety. Consumers shall bear for all the consequences, to which our company will not assume any legal liability.
-
Decomposition of this product by non-professionals is strictly prohibited. Otherwise, it may cause a fire or damage the product.
-
Do not use a load (electrical appliances) that exceeds the output current of this product. A circuit protection mechanism is built-in to automatically stop working if loads exceed.
-
Do not put this product in water (or washing machine). Any damage resulted from water into the earphones caused by the consumers themselves, the responsibility falls to the consumers, where our company won’t be able to provide any after-sales or return services.
Note: For waterproof level, please refer to the detailed introduction. -
If consumers use power adapters for charging, they should purchase power adapters that have CCC certification and meet the standard requirements.
Specifications
Name: Baseus Portable Wireless Speaker
Rated input: DC5V-1500mA Model No.: Baseus AeQur VO20
Rated current consumption: 200mA
Material: ABS+PC
Bluetooth version: V5.3
Communication distance: 10m
Output power: 7.5W+7.5W
Charge time: About 2.5 hours
Frequency response range: 70Hz to 20kHz
Music playback time: 15 hours (50% volume)
Battery capacity: 2500mAh/9.25Wh
Charging interface: Type-C
Suitable for: compatible with most Bluetooth playback devices
“The above data are measured by the Baseus laboratory, the actual use can be
slightly different depending on the specific circumstances.
Content
- Wireless speaker X1
- Charging cable ×1 02
- User manual X1
- Warranty card ×1