BEGA 50752.4 LED Floor Lamp Instruction Manual
- June 13, 2024
- BEGA
Table of Contents
BEGA 50752.4 LED Floor Lamp
Product Information
- Product Description: Innenfarbton messing matt Schlagfeste Kunststoffabdeckung, transluzent- Aluminium housing shield, Finish Colour velvet black inside hue matt brass Impact-resistant synthetic cover, translucent white
Dimensions
- Weight: 9.8 kg
- LED Power Supply: 220-240 V, 50-60 Hz
- Energy Efficiency: Light sources of energy efficiency class(es) D
- Safety: The installation and operation of this luminaire are subject to national safety regulations. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
- Overvoltage Protection: The electronic components installed inthe luminaire are protected against overvoltage in accordance with DIN EN 61547. For additional protection against transients, etc., separate overvoltage protection components are recommended.
- Lamp Module Connected Wattage: 23 W
- Luminaire Connected Wattage: 26.5 W
- Colour Temperature: 3000 K
- Colour Rendering Index (CRI): CRI > 90
- Module Luminous Flux: 3790 lm
- Luminaire Luminous Flux : 2311 lm
- Luminaire Luminous Efficiency: 87.2 lm/W
Application
Floor lamp · indoor luminaire with impact resistant synthetic diffuser and
metal housing for shielded light, deflected upwards and downwards.
Product description
- Floor lamp »STUDIO LINE«
- Metal housing, finish Colour velvet black Aluminium housing shield,
- Finish Colour velvet black inside hue matt brass
- Impact-resistant synthetic cover, translucent white
- Touch-controlled dimmer for infinite light adjustment
- Black cable · 2 m, with safety plug
- LED power supply unit 220-240 V y 50-60 Hz
- BEGA Thermal Control®
- Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
- Safety class I
- CE – Conformity mark
- Weight: 9.8 kg
- This product contains light sources of energy efficiency class(es) D
Safety
- The installation and operation of this luminaire are subject to national safety regulations.
- The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
- The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
- To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
- You can find them on our website at www.bega.com.
Lamp
- Module connected wattage 23 W
- Luminaire connected wattage 26.5 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 55 °C
50 752.4 K3
- Module designation 2x LED- 0447/930
- Colour temperature 3000 K
- Colour rendering index CRI > 90
- Module luminous flux 3790 lm
- Luminaire luminous flux 2311 lm
- Luminaire luminous efficiency 87,2 lm / W
Installation
- LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
- Carefully remove the floor lamp from its packaging and set it up. Make sure that the luminaire is in a firm and secure position. Connect luminaire to mains supply (230 V). Press sensing device gently to turn the
- luminaire on or off.
- Holding the sensing device enables to adjust the light intensity infinitely.
Cleaning · Maintenance
- Clean luminaire regularly with solvent-free cleansers from dirt.
- We recommend that you dry-clean the sensing device.
Replacing the LED module
- The designation of the LED module is noted on a label in the luminaire.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
- Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
- Defective luminaire cover must be replaced. Close the luminaire.
Spares
- Synthetic cover 15 000 424
- LED power supply unit DEV- 0338/700i
- LED module 3000 K LED-0447/930
- Shield 71 003 353 B27
CONTACT
- ADDRESS: BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden ·
- [email protected] ·
- www.bega.com
References
Read User Manual Online (PDF format)
Loading......